Kryoflux Stream Support

[Giants]

Hi !


WinUae does'nt support 'RAW FLUX STREAM', so in multiples Stream File in .RAW ?


It's crash when I try to use the first
ex : Track Dump_00.0.raw

[Toni Wilen]

Not enough information. Can't say anything without those files..

[Tomislav]

I think that you can convert raw stream to other format with Kryofluks tools.

Looks like SPS Decode Library (CAPSImg.dll) still don't support raw stream, at least one from 2014. That is used usually with WinUAE.

There are two CAPSImg.dll libraries and both are same version (5.1.0.1), but different files. In spsdeclib_5.1_windows_binary.zip is from year 2014 and in kryoflux_3.00_windows.zip is from 2017. Both archives are on Kryoflux download page.

[Jope]

You can use HXC tools to convert the streams. dtc also will convert them to any format it supports, but of course copy protections will fail..

[Retroplay]

Yes, just use DTC to convert stream files to CT RAW then you can use them in WinUAE.

[Giants]

Configuration :
Windows 10 - 64B // 32G Ram
WinUAE V4.3.0 (2019.12.19) 64-Bit
Installation Directory : C:\Program Files\WinUAE\

I already tried ALL CAPSImg.dll available on https://www.kryoflux.com/?page=download
CAPSImg.dll copy to C:\Program Files\WinUAE\ and C:\Windows\System32\ Directorys

I have no problem to lauch IPF or ADF file BUT, WinUAE don't work with all my flux file (I say ALL and I have a lot)

WinUAE Configuration (A500 Standard)
CPU68000
Approximate A500 or Cycle-exact
OCS Chipset
Cycle-exact (full)
KS ROM V1.3 (A500, A1000, A20200) rev 34.5 (256k) [315093-02]
512 Chip

This configuration work with ALL my files (ADF and IPF), but don't work with all kryoflux files
ak (160 files of flux : ex : 00.0.raw, 00.1.raw, 01.0.raw etc)

ALL this flux work (tested on real A500, I'm 100% sure)

Workflow :
(1) Start WinUAE
(2) Select Configuration panel and select A500 (configuration Shown above) / Double Click
(2b) WinUae Start in a Window
(3) Press F12, enter in the WinUAE Menu, select floppy Drive panel and select file for DF0
(3b) : ex : D:\Dump\0068_Jim_Power_Amiga_D1\00.0.raw
(4) Click Ok to retrun to the WinUAE Windows Emulation
(5) it Start.... but....no boot, I stay in the Kickstart 1.3 Floppy picture.
(6) Press F12, Enter in the WinuAE menu, choice another disk, whatever ADF, IPF, game, demo, tools
(7) return to the WinUae Emulation Windows, it's booting and work

WinUAE seem don't understand it's the first Flux File (ak 00.0.raw)

And I don't want to convert my fluxs
So Don't support ?
And I don't see the extension in choices.

[Tomislav]

I think that stream is still not supported by CAPSImg.dll.

6 years ago was written in kryoflux forum https://forum.kryoflux.com/viewtopic.php?t=205&start=20:

"- with new capsimg.dll you can now directly load CT raw (stream coming soon) images in emulators, e.g. WinUAE, FS-UAE, Hatari, STEem, Spectaculator and many more."

[Giants]

Thks Tomislav.
Tis explains that.
Maybe one day

[Tomislav]

You're welcome!