24 April 2016, 10:20 | #541 |
Registered User
Join Date: Mar 2016
Location: poland
Posts: 17
|
Yes i have amiga 1200 rev 1d4. And two cards: blizard 1260 and 1230. On 1260 everything is ok. But on 1230 scumm 1.5 got error 80000003 or 80000004. I start scumm i could change opions, but when i press add game error appears. Scumm 1.3 works fine.
|
26 April 2016, 12:21 | #542 |
Registered User
Join Date: Mar 2016
Location: poland
Posts: 17
|
Hi again.
Another question. Why scumm 1.5 030 don't recognize games: full throttle, kings quest 5, the dig. On scumm 1.5 060 the games are playable very well. |
26 April 2016, 14:24 | #543 |
CaptainM68K-SPS France
|
full throttle needs a 060. You won't be able to make it work on a 030. Same for the The Dig.
For king quest 5, there's maybe another problem. |
27 April 2016, 01:43 | #544 | |
Registered User
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 4,400
|
Quote:
Each build of ScummVM (ECS/AGA 030/AGA 060/RTG 040) support a different set of games because there was no point in supporting a game that would be unplayable on a slower CPU....for example Broken Sword (which is an SVGA game) is only supported by the fastest Amiga's. Last edited by NovaCoder; 02 January 2017 at 23:29. |
|
14 December 2016, 21:04 | #545 |
Ruler of the Universe
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 6,185
|
Just to comment, Nova my friend, that finally I'm able to run ScummVM AGA while using your dear CyberbugFixAga patch.
That's thanks to "Gfxroute" by megacz on Aminet. I'm using a script with "Gfxroute raster+bitmap-cyber chip 5 >NIL: " |
02 January 2017, 18:45 | #546 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
Ok, have played around with "ScummVM_AGA_040.lha 1.5.0.004" and now have DOTT working but no sound at all
I've watched Nova's video on page 1 of this huge thread. I've installed AHI 4.18 plus CAMD and configured them correctly (I think). Any ideas / suggestions? |
02 January 2017, 23:15 | #547 | |
Registered User
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 4,400
|
Quote:
Usually this happens because either AHI isn't configured properly OR you are using compressed audio files (eg MP3, FLAC). The original games didn't use compressed audio but people sometimes used compressed audio to save space for game copies. Try using a game (or demo) that you are sure is an original copy. Can you open the AHI prefs without any error messages appearing? You don't need to install CAMD to get sound working, the SFX/speech use AHI and only the MIDI music goes through CAMD. Maybe try running it without CAMD as your music device set in ScummVM until you get normal SFX and music running? |
|
03 January 2017, 00:15 | #548 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
Cheers for your reply NovaCoder
Figured it out; I was using the files in your original package here: /TheZone/files/dottAGA_novacoder [Day of the Tentacle AGA, WB-friendly version of Novacoder.].zip I have since downloaded the full "Talkie CD" version and replaced the files: ... MONSTER.SOU ... TENTACLE.000 ... TENTACLE.001 Now sound fx / music are playing |
03 January 2017, 00:47 | #549 | |
Registered User
Join Date: Sep 2007
Location: Melbourne/Australia
Posts: 4,400
|
Quote:
|
|
03 January 2017, 20:22 | #550 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
I've been using your DOTT AGA port with full speech because of the lower footprint and being more suited to A1200 / 3.1 OS Amigas...
Anyway; unfortunately today I found a bug when using the full talkie files, see here So ended up trying out the ScummVM ports again tonight, unfortunately they need way more resources though... Tested using the 030 & 040 version and the bug above doesn't occur with these which is cool Problem is I can't get music now ...I'm using the files from the CD talkie .ISO again so not sure what's going on; last time I used these all was ok. |
03 January 2017, 20:38 | #551 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
Don't worry, if I use anything but CAMD under "Audio" for the "Preferred Dev." then sound fx / speech / music all work
Thing is; I have to use JIT with the 040 configuration otherwise it's sooooo slow it's not funny. |
12 May 2017, 20:07 | #552 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,337
|
Could someone give me a hand getting ScummVM AGA working with my MT-32?
I'm using the last version of ScummVM AGA, the MT-32 works great with ScummVM in windows so I know it's working fine. I have CAMD installed and have connected the serial port midi interface. I've set midi in ScummVM to CAMD but I get no audio. If I set CAMD under the MT-32 tab in ScummVM then upon launching a game it immediately crashes back to WB. Has anyone got an MT-32 working? If so, what settings do I need to apply, and how can I tell if CAMD is installed correctly and working? Is there anything to do to the serial midi interface to tell the Amiga it's connected and usable? |
13 May 2017, 14:53 | #553 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,337
|
Ok I know that the midi-serial interface works ok as Octamed can play midi tracks and then mt-32 will play them. But I still don't know if CAMD is set up correctly.
When ScummVM crashes back to WB (if Audio device is set to CAMD or the Mt-32 tab device is set to CAMD) error.txt shows that no device was found to open! Help! Last edited by trixster; 13 May 2017 at 15:00. |
13 May 2017, 16:27 | #554 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,902
|
Quote:
http://aminet.net/package/mus/edit/camd You could try http://aminet.net/package/mus/midi/CAMD_Toolkit and remember DONT install the software synthesizer. |
|
13 May 2017, 16:52 | #555 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,337
|
Ah, what if I already have the software synthesiser installed! Is it simply a matter of removing that?
|
13 May 2017, 16:53 | #556 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,337
|
I've run miditool before, added the serial port but the settings don't seem to save - i.e. If I open miditools again I have to add the serial port again.
|
13 May 2017, 17:29 | #557 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,902
|
Ah yeah could be, I remember having this problem, I removed the soft synth, but I think there was something else. Test with one of the Midi players in that package like fireworks.
|
13 May 2017, 19:49 | #558 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,337
|
Fixed it! Even though Snoopdos was telling me that midi.prefs was being saved by miditools it turns out it wasnt. Deleting midi.prefs from sysrefs/env-archive/sys and then re-running miditools fixed it! ScummVM now works perfectly with the MT-32. Result!
|
13 May 2017, 22:53 | #559 |
Ruler of the Universe
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 6,185
|
Oh, great to see you fixed it
|
28 August 2017, 18:31 | #560 | |
Registered User
Join Date: Aug 2017
Location: Ohio, USA
Posts: 14
|
Quote:
Is there any chance you would share your source code for your SCUMMVM-RTG or ZDOOM-RTG port? (Awesome work, by the way!) Maybe at github? Only reason I ask is because they both don't work correctly at the moment with the VA2000 video card, and having the source code might be helpful in figuring out why. The video is stuck at the top third of the screen, and is badly scrambled. I'm sure it's a problem with the VA2000 drivers, because it works fine with a RetinaZ3BLT graphics card, both using P96. Any ideas? (Also, in case you weren't aware, your private message box is too full to accept any private messages.) |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Latest version of ScummVM also ported to RTG | NovaCoder | News | 430 | 01 April 2024 23:22 |
Latest version of ScummVM also ported to ECS | NovaCoder | News | 128 | 01 April 2024 02:51 |
ScummVM and AGA Amiga | HardStep | support.Games | 34 | 04 December 2023 01:00 |
Quake 2 ported to AGA | NovaCoder | News | 213 | 13 June 2022 16:56 |
Full Throttle AGA - ScummVM V1.0.0 | NovaCoder | project.Amiga Game Factory | 102 | 04 July 2011 11:53 |
|
|