Indivision AGA Mk2 stopped working

[Retrofan]

If you turn it on with the Indi connected you can see if after some minutes a chip under it, Xilinx becomes too hot.

[Crawff]

Hi all,

I thought i would update this thread incase anyone was wondering if the Indivision AGA Mk2 was indeed faulty.

Well, the answer is no. The earth cable i attached had somehow started to touch the Indivision AGA and cause it to shut down to prevent damage. Amigakit tested the Indivision AGA and reported back that it was still OK.

When i received it back, I popped it back into my 1200 and it worked perfectly. I did however leave out the earth lead this time.... :-)

[johnim]

great news and your lucky no to have fried it

[mfilos]

You can also use some tape to insulate the iron areas of the earth cable just to be sure

[FOL]

Originally Posted by mfilos

You can also use some tape to insulate the iron areas of the earth cable just to be sure

That may not help if they tighten it up and component pushes straight through tape.
Problem is, you need to make sure washer is on bottom and the tag is at top and make sure the tag is away from components, before tightening up.