English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 05 November 2018, 13:39   #2821
amigoun
Registered User
amigoun's Avatar
 
Join Date: May 2010
Location: Czech Rep
Posts: 558
Quote:
Originally Posted by JimDrew View Post
Not by the official last release of iFUSION, but we did have preliminary support in later releases that never made it public.

Thats quite sad, because most users had 603e, but do you remember why it was not released? Was it still unfinished or iFusion sales already stopped?
amigoun is offline  
Old 05 November 2018, 19:31   #2822
BULI
Registered User

 
Join Date: Dec 2017
Location: Rzeszów
Posts: 276
Quote:
Originally Posted by grelbfarlk View Post
Has anyone successfully used the Sonnetlib PPC cards with any of the following HDD controllers:
FastATA-MKI
Fastlane Z3
A4091

Problem I'm having is that with the FastATA or the Fastlane, system will not boot with a flashing yellow screen, which I think is an address conflict. Setting the SWAP jumper will allow the Fastlane to see drives but I get a block access error past the range of blocks on the HDD.

The A4091 works and I've copied quite a lot of data with it, but I'm getting random lockups after the library is initialized.

Probably in 2 weeks I will have FastATA (zorro3), and I will test with Sonnet.
BULI is offline  
Old 09 November 2018, 16:27   #2823
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
Hi, everybody

I have a strange problem with my K1. E.g Quake starts and after some time it slows down (as in the attached movie).
Sometimes the application starts to slow down during the launch - not just the quake

My equipment is: A1200, Apollo1260, Mediator TX, Killer K1, Voodoo 3, SB128 ( i removed Spider and Realtek )

Any ideas maybe someone had a similar case?

[ Show youtube player ]
marpla is offline  
Old 09 November 2018, 17:04   #2824
Hedeon
PPC Hacker

 
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,222
Quote:
Originally Posted by marpla View Post
Hi, everybody

Any ideas maybe someone had a similar case?
Hi,

No clue. And 1200 is not supported officially as of yet.

Edit: Is it the GL version of Quake?

Last edited by Hedeon; 09 November 2018 at 17:41.
Hedeon is offline  
Old 09 November 2018, 17:44   #2825
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
No, but everything behaves similarly or crash on start.

When I launch Quake in 640x480, this is a slideshow from the very beginning

Last edited by marpla; 09 November 2018 at 17:59.
marpla is offline  
Old 09 November 2018, 21:09   #2826
Hedeon
PPC Hacker

 
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,222
What is your pciinfo output? And your voodoomem setting? Nocache setting? Voodooint setting?
Hedeon is offline  
Old 09 November 2018, 21:33   #2827
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
Voodoomem 13
nocache - not set
Voodoinit Yes

Pci Device 1:
VendorID: $1274
VendorName: Ensoniq
DeviceID: $5880
DeviceName: 5880x Soundblaster (CT4750)
ClassCode: $40100
RevisionID: $4
InterruptPin: 4
SubsystemVendorID: $1274
SubsystemID: $2000
IOSpace0: $ed6000 - $ed603f

Pci Device 2:
VendorID: $1957
VendorName: Unknown
DeviceID: $86
DeviceName: Unknown
ClassCode: $b2000
RevisionID: $30
InterruptPin: 1
SubsystemVendorID: $1a56
SubsystemID: $201
MemSpace0: $30000000 - $300fffff

Pci Device 3:
VendorID: $121a
VendorName: 3dfx Interactive Inc
DeviceID: $5
DeviceName: Voodoo3 All Voodoo3 chips, 3000
ClassCode: $30000
RevisionID: $1
InterruptPin: 2
SubsystemVendorID: $121a
SubsystemID: $14
MemSpace0: $32000000 - $33ffffff
MemSpace1: $34000000 - $35ffffff
IOSpace2: $ed6100 - $ed61ff
RomSpace: $30100000 - $3010ffff

Last edited by marpla; 09 November 2018 at 21:41.
marpla is offline  
Old 09 November 2018, 21:47   #2828
Wrangler
Registered User

 
Join Date: Sep 2015
Location: London, UK
Posts: 324
@marpla: where's all your mem? Start the PPC and then do a pciinfo. And post your medconfig too
Wrangler is offline  
Old 09 November 2018, 21:54   #2829
Hedeon
PPC Hacker

 
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,222
PPC Mem does not show up on a 1200. $20000000-$30000000 is reserved for it by Elbox when PPCPCI=yes.
Hedeon is offline  
Old 09 November 2018, 21:58   #2830
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
This is pciinfo with PPc started.

MedConfig:<

Voodoomem 13
nocache - not set (i tested with Yes no differences)
Voodooint Yes
VoodooMemOS No
MMU Yes
PPCPCI Yes
Warp3D No
marpla is offline  
Old 09 November 2018, 22:02   #2831
Wrangler
Registered User

 
Join Date: Sep 2015
Location: London, UK
Posts: 324
I stand corrected! But I believe VoodooMemOS should be Yes. Doubt this will fix your problem but you never know.
Wrangler is offline  
Old 09 November 2018, 22:04   #2832
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
I tried it too
marpla is offline  
Old 10 November 2018, 00:54   #2833
Hedeon
PPC Hacker

 
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,222
VoodooMemOS is only used for MPC107 cards.
Hedeon is offline  
Old 10 November 2018, 12:20   #2834
Wrangler
Registered User

 
Join Date: Sep 2015
Location: London, UK
Posts: 324
Quote:
Originally Posted by Hedeon View Post
VoodooMemOS is only used for MPC107 cards.

Oops. OK, I'm going to go and sit in the corner and do a 1,000 lines of "I must leave the techy questions to Hedeon"...
Wrangler is offline  
Old 10 November 2018, 13:24   #2835
Michaell
 
Posts: n/a
Quote:
Originally Posted by marpla View Post
I tried it too
Hi, which graphic card do You have exactly ?
it is original 3dfx Voodoo 3 or EvilKING 3 C355 ?
did you try with Clean OS3.9 BB2 ?
 
Old 10 November 2018, 14:10   #2836
Hedeon
PPC Hacker

 
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,222
Quote:
Originally Posted by Wrangler View Post
Oops. OK, I'm going to go and sit in the corner and do a 1,000 lines of "I must leave the techy questions to Hedeon"...
I just give additional info. Be my guest.

Regarding VoodoomemOS. The MPC107 needs to upload a small PPC program into PCI memory (which is in our case VGA memory) to detect and install the memory on the MPC107 cards.

The other cards all have their memory setup automatically or through PCI by the 68k. So we can put PPC code directly in the PPC memory. The K1 can be started without any other PCI card in the system from a boot with no startup-sequence.
Hedeon is offline  
Old 10 November 2018, 14:14   #2837
Hedeon
PPC Hacker

 
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 1,222
That it starts ok (I am assuming 320x240?) and that 640x480 does not start ok... I would suggest some VGA memory problem? But you said other applications show it too? Which? all of them using the voodoo?
Hedeon is offline  
Old 10 November 2018, 14:52   #2838
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
I also tried Doom the same problem.
Sometimes when I start the Quake subtitles in Shell are slowly displaying or running slowly from the very beginning, there is no rule. SysSpeed and cyberpi works fine, cybermand seems too slow. How can I check the card's memory or what else can I run for testing?

Last edited by marpla; 10 November 2018 at 15:08.
marpla is offline  
Old 10 November 2018, 15:04   #2839
marpla
Registered User

 
Join Date: Nov 2018
Location: Poland
Posts: 24
Quote:
Originally Posted by Michaell View Post
Hi, which graphic card do You have exactly ?
it is original 3dfx Voodoo 3 or EvilKING 3 C355 ?
did you try with Clean OS3.9 BB2 ?

I tried clean installation. My card looks like this one:


https://www.google.com/search?client...AMRwvnpI766lM:
marpla is offline  
Old 10 November 2018, 15:08   #2840
Michaell
 
Posts: n/a
Quote:
Originally Posted by marpla View Post
I tried clean installation. My card looks like this one:


https://www.google.com/search?client...AMRwvnpI766lM:
PowerColor EvilKing 3 Pro C355
 
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card keropi MarketPlace 12 15 March 2017 02:48
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) kronuz MarketPlace 0 16 June 2013 00:29
eBay : Sonnet Quaddoubler alexh MarketPlace 3 07 May 2013 00:50
Overlay problem on GeForce 7200 Leandro Jardim support.WinUAE 1 10 August 2010 15:50
Prometheus PCI & Voodoo 3 PCI GFX Card Slayer support.Hardware 21 05 September 2006 10:57

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 06:41.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.15244 seconds with 14 queries