New Amiga compatible LCD monitor

rkauer · 27 February 2009, 06:01

Hello people!

I'm back from a short vacation, but with a new toy on the luggage: two brand-new LCD TV monitors.

Not a big deal, some may say. Except for the brand: "Fujilink" (does anyone ever read about it?).

I bought two units, one 19" wide screen, one 4:3. Both work OK on the Amiga, yay. Hooked on the VGA connector with the original silver "dongle".

They work flawlessly on PAL, NTSC, Productivity, Multiscan & DBL_NTSC. On the others, don't (obviously). The models are FU1901W PT (widescreen) and AT-G19-TV ("square" TV).

I think there is a time for a new sticky thread: Amiga compatible LCD monitors

Fingerlickin_B · 27 February 2009, 06:06

So you are saying games can be displayed on these?

PZ.

Predseda · 27 February 2009, 08:34

Could you take the closeup (macro) photo of pixels in letters in the workbench? What is the native resolution of these displays?

rkauer · 27 February 2009, 20:06

@Fingerz: yes

@Predseda: native are 1440x900 (ws) & 1280x1024 (4:3).

There are some artefacts on the wide screen due resampling. Good enough on the normal aspect ratio.

alexh · 27 February 2009, 20:19

What they like in interlaced modes?

rkauer · 27 February 2009, 22:01

They flick...

But making the monitor "permanence" bigger, it flick a lot less. On supported modes, of course!

alexh · 27 February 2009, 23:25

Even when connected via SCART?

rkauer · 28 February 2009, 05:00

No SCART on this side of the world, friend.

The monitor only have VGA, HDMI (no Amiga use), composite, S-VHS, component (YPbPr) and RF.

alexh · 28 February 2009, 10:00

Composite then... still flicker?

Photon · 28 February 2009, 16:51

1280x1024 is 5:4, sadly (for us PAL users!) Is the picture aspect adjustable without getting scaling issues?

Also, ehm, how much are they??

rkauer · 01 March 2009, 03:47

Scaling artefacts in all viewable PAL modes. Crisp and perfect image on NTSC.

The company offer a regular 4:3 model too. I have both now and like the wide screen better (more Amiga Workbench, yay

).

I bought each for US$116 on a free tax zone. Cheap as chips.

redblade · 02 March 2009, 02:54

overscan still works A OK with them?

rkauer · 30 June 2010, 20:00

Sorry for the long time for the answer: yes, it overscan very nicely in all modes the monitor can handle.

Used it with all my Amigas for more than an year now and it is still going strong.

Reynolds · 30 June 2010, 21:38

The best display I ever tried with my amigas was a Daewoo lcd. still crying back those days...
gave a try with composite, then svideo and SCART. it was outstanding. and with it's VGA and USB ports, built-in DVD I believe that's the ultimate solution.

rkauer · 01 July 2010, 04:47

Model, good sir?

Reynolds · 01 July 2010, 11:41

Here it goes: Daewoo DSL-19T2WC.

Sorry for the not-so-good quality of the two pics I made, I had my mobile only at that moment.
The first screen is a PAL 640x256 mode with SCART cable (SVideo gave the same result.)
Note that it had the protective plastic on the panel.

27 February 2009, 06:01	#1
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	New Amiga compatible LCD monitor Hello people! I'm back from a short vacation, but with a new toy on the luggage: two brand-new LCD TV monitors. Not a big deal, some may say. Except for the brand: "Fujilink" (does anyone ever read about it?). I bought two units, one 19" wide screen, one 4:3. Both work OK on the Amiga, yay. Hooked on the VGA connector with the original silver "dongle". They work flawlessly on PAL, NTSC, Productivity, Multiscan & DBL_NTSC. On the others, don't (obviously). The models are FU1901W PT (widescreen) and AT-G19-TV ("square" TV). I think there is a time for a new sticky thread: Amiga compatible LCD monitors Attached Thumbnails

01 July 2010, 11:41	#16
Reynolds Alien Breeder Join Date: Dec 2007 Location: Szigetszentmiklos / Hungary Age: 46 Posts: 1,106	Here it goes: Daewoo DSL-19T2WC. Sorry for the not-so-good quality of the two pics I made, I had my mobile only at that moment. The first screen is a PAL 640x256 mode with SCART cable (SVideo gave the same result.) Note that it had the protective plastic on the panel. Last edited by Reynolds; 19 November 2022 at 19:50.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LCD monitor for Amiga/console use?	moijk	Retrogaming General Discussion	1	26 May 2011 08:27
Cheap Amiga-compatible LCD Monitor/TV in Australia	Cammy	Amiga scene	15	29 September 2010 15:57
Which LCD monitor for Amiga	jotd	support.Hardware	81	22 October 2008 11:35
Amiga on HP LCD Monitor	SkippyAR	Hardware pics	13	31 August 2008 15:49
Is this LCD monitor for Amiga worth it?	Pyromania	MarketPlace	9	06 April 2008 15:25

27 February 2009, 06:06	#2
Fingerlickin_B Amiga Nut Join Date: Oct 2006 Location: Belco, Australia Posts: 2,242	So you are saying games can be displayed on these? PZ.

27 February 2009, 08:34	#3
Predseda Puttymoon inhabitant Join Date: Mar 2007 Location: Tromaville Age: 46 Posts: 7,551	Could you take the closeup (macro) photo of pixels in letters in the workbench? What is the native resolution of these displays?

27 February 2009, 20:06	#4
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	@Fingerz: yes @Predseda: native are 1440x900 (ws) & 1280x1024 (4:3). There are some artefacts on the wide screen due resampling. Good enough on the normal aspect ratio.

27 February 2009, 20:19	#5
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,397	What they like in interlaced modes?

27 February 2009, 22:01	#6
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	They flick... But making the monitor "permanence" bigger, it flick a lot less. On supported modes, of course!

27 February 2009, 23:25	#7
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,397	Even when connected via SCART?

28 February 2009, 05:00	#8
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	No SCART on this side of the world, friend. The monitor only have VGA, HDMI (no Amiga use), composite, S-VHS, component (YPbPr) and RF.

28 February 2009, 10:00	#9
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,397	Composite then... still flicker?

28 February 2009, 16:51	#10
Photon Moderator Join Date: Nov 2004 Location: Eksjö / Sweden Posts: 5,625	1280x1024 is 5:4, sadly (for us PAL users!) Is the picture aspect adjustable without getting scaling issues? Also, ehm, how much are they??

01 March 2009, 03:47	#11
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Scaling artefacts in all viewable PAL modes. Crisp and perfect image on NTSC. The company offer a regular 4:3 model too. I have both now and like the wide screen better (more Amiga Workbench, yay ). I bought each for US$116 on a free tax zone. Cheap as chips.

02 March 2009, 02:54	#12
redblade Zone Friend Join Date: Mar 2004 Location: Middle Earth Age: 40 Posts: 2,127	overscan still works A OK with them?

30 June 2010, 20:00	#13
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Sorry for the long time for the answer: yes, it overscan very nicely in all modes the monitor can handle. Used it with all my Amigas for more than an year now and it is still going strong.

30 June 2010, 21:38	#14
Reynolds Alien Breeder Join Date: Dec 2007 Location: Szigetszentmiklos / Hungary Age: 46 Posts: 1,106	The best display I ever tried with my amigas was a Daewoo lcd. still crying back those days... gave a try with composite, then svideo and SCART. it was outstanding. and with it's VGA and USB ports, built-in DVD I believe that's the ultimate solution.

01 July 2010, 04:47	#15
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Model, good sir?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)