Dragons Breath on Winuae

whiteb · 18 June 2003, 10:30

Hi all..

Trying to load Dragons Breath on Winuae (Caps Release).

It loads to a black screen, and about 30 seconds later it guru's.

if anyone has it working, can they send me a configuration they use to run it ?

Winuae 0822 R7, using the Caps library.

Cheers.

[Edit] I set sound to disable, but emulated.. and it loaded to the warning screen. And there it sits.

[edit again] helped in IRC with the configuration. <with thanks>

fiath · 18 June 2003, 14:02

Best thing to do with all original (CAPS released) games is to have a compatible as possible config...

Anything else is just asking for trouble.

IFW · 18 June 2003, 18:23

You should change the rom location in this file to the path where your KS1.3 is located.
You may want to change the video mode etc, if your machine is slow. and controller config of course.
Do not change anything else. (cycle exact, 68k, etc)
The game uses Speedlock protection measuring bitcell densities, that is much more involved, than Copylock.

The "piracy is theft" campaign is shown for about 10 seconds before loading continues.

IFW · 18 June 2003, 18:24

cfg

Mnemesi · 20 November 2005, 05:15

My CAPS hangs at the 'Piracy is Theft' screen indefinately on r4, but not on r7. Amazing what a revision number or 3 can do.

IFW · 21 November 2005, 14:08

It is not your file that hangs...

Mnemesi · 22 November 2005, 05:31

...

18 June 2003, 10:30	#1
whiteb Fanatically Amiga. Join Date: Apr 2002 Location: Melbourne, Victoria, Australia Age: 54 Posts: 1,557	Dragons Breath on Winuae Hi all.. Trying to load Dragons Breath on Winuae (Caps Release). It loads to a black screen, and about 30 seconds later it guru's. if anyone has it working, can they send me a configuration they use to run it ? Winuae 0822 R7, using the Caps library. Cheers. [Edit] I set sound to disable, but emulated.. and it loaded to the warning screen. And there it sits. [edit again] helped in IRC with the configuration. <with thanks> Last edited by whiteb; 18 June 2003 at 11:34.

20 November 2005, 05:15	#5
Mnemesi Registered User Join Date: Nov 2005 Location: North America Age: 55 Posts: 58	My CAPS hangs at the 'Piracy is Theft' screen indefinately on r4, but not on r7. Amazing what a revision number or 3 can do. Last edited by Mnemesi; 20 November 2005 at 05:22.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dragons Breath	Digideus	Retrogaming General Discussion	16	23 April 2008 19:31
Dragons Breath	Galahad/FLT	Games images which need to be WHDified	131	16 November 2003 00:35
Dragons Breath	Galahad/FLT	MarketPlace	6	21 November 2002 01:52
Dragons Breath ...RIP ??	scoobysnax114	support.Games	1	14 July 2002 20:19
Problem with Dragons Breath	Splatman	support.Games	18	22 October 2001 20:22

18 June 2003, 14:02	#2
fiath Moderator Join Date: Jan 2002 Location: South East / UK Age: 46 Posts: 1,930	Best thing to do with all original (CAPS released) games is to have a compatible as possible config... Anything else is just asking for trouble.

18 June 2003, 18:23	#3
IFW Moderator Join Date: Jan 2003 Location: ... Age: 52 Posts: 1,838	You should change the rom location in this file to the path where your KS1.3 is located. You may want to change the video mode etc, if your machine is slow. and controller config of course. Do not change anything else. (cycle exact, 68k, etc) The game uses Speedlock protection measuring bitcell densities, that is much more involved, than Copylock. The "piracy is theft" campaign is shown for about 10 seconds before loading continues.

21 November 2005, 14:08	#6
IFW Moderator Join Date: Jan 2003 Location: ... Age: 52 Posts: 1,838	It is not your file that hangs...

22 November 2005, 05:31	#7
Mnemesi Registered User Join Date: Nov 2005 Location: North America Age: 55 Posts: 58	...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)