05 June 2007, 11:54 | #21 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,025
|
As has already been stated by DDNI in this thread- Mediator fits. GREX will fit also.
Screws are provided. You will need an ATX PSU to A1200 power adapter if you are not using a Mediator or GREX. We stock a wide range of A1200 keyboard adapters to use with the Z4 in our webstore: Lyra: http://amigakit.leamancomputing.com/...roducts_id=207 EZ-Key: http://amigakit.leamancomputing.com/...roducts_id=636 PC-Key: http://amigakit.leamancomputing.com/...roducts_id=332 Visit our webstore for detailed pictures, specs and pricing |
05 June 2007, 12:01 | #22 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 55
Posts: 2,715
|
Thanks for the info, Peter
|
05 June 2007, 13:28 | #23 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
@amigakit
What time do you close - I've been given a hellish job in Pontypool I need to attend to now so won't be back until (all being well) 3ish. Cheers, M. |
05 June 2007, 13:41 | #24 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,025
|
Office closes at 5pm- although you can call in tomorrow or Thursday if you want
|
05 June 2007, 15:30 | #25 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 55
Posts: 2,715
|
If I wanted to buy the Z4 tower is there a link I follow on the Amigakit website to add it to my basket as it were...?
Also what is the difference between the LT4 Mediator and the Sx version? Cheers Peter |
05 June 2007, 15:40 | #26 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,025
|
There isnt yet- we only have a few Z4 towers left and need to put together some more.
We stock the full range of Mediator PCI busboards for all Amigas including: The Mediator 1200SX is a 6-slot PCI busboard with AT and ATX power connectors The Mediator 1200LT4 is a 4-slot PCI busboard with just AT power connector Both are supplied from us complete with Multimedia CD drivers and the accelerator pass-through adapter. |
05 June 2007, 16:01 | #27 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 55
Posts: 2,715
|
OK - thanks again, I'll PM you if I decide to go with this idea, Peter
|
05 June 2007, 21:59 | #28 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
@Amigakit
Hi again... Unfortunately the IDE thing seems defective - it burnt itself to a crisp (just the cable - no idea why the Amiga seems fine) followed the instructions down to the letter. I probably need a cable for the hard-drive and DVD ROM and also floppy disk (trying to make sure I'm plugging it into the right place. If I bought it in on Thursday some time would it be okay to go through it? Cheers, M. P.S. Does anyone have an amiga motherboard diagram? P.P.S. Are PC floppy cables compatible with the Amiga? Last edited by Macca; 05 June 2007 at 22:15. |
07 June 2007, 10:39 | #29 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,025
|
Pop it in and we will have a look at it.
PC floppy cables are not Amiga compatible. |
07 June 2007, 20:52 | #30 |
Still an Amiga user
Join Date: Nov 2006
Location: Kent
Age: 55
Posts: 2,715
|
Amigakit - I am trying to send you a PM but your message box is full and my message cant be sent - I will try later... Peter
|
07 June 2007, 21:32 | #31 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,025
|
|
08 June 2007, 15:56 | #32 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
I must also take this opportunity to thank amigakit.com.
The guy has everything in his shop and I certainly will be going back there again for more goodies! Once I left the shop everything was working perfectly the only problem I had was when the old hard drive I was using blew up (not my fault - honest!). Thanks again mate! M. |
09 June 2007, 15:44 | #33 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
@amigakit.com
Hi mate Quick question. If you remember the blue wire which I need to connect to the middle of the power supply. I wondered if there was a proper device that sat internally rather than go out of the case and back in? Cheers, M. |
09 June 2007, 18:34 | #34 |
Registered User
Join Date: Aug 2004
Location: www.amigakit.com
Posts: 2,025
|
You could solder it on the underside of the A1200 motherboard- trace the -12v line.
|
09 June 2007, 20:56 | #35 |
Zone Friend
Join Date: Jul 2004
Location: Gloucester
Posts: 697
|
Not a bad idea my mate at work will have his work cut out on Monday..
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A4000 Setup advice needed.... | Sandman | support.Hardware | 6 | 09 December 2010 03:18 |
once again advice needed please!! | bowfell | Amiga scene | 3 | 24 August 2010 21:49 |
A2000 Advice needed | Andec | support.Hardware | 11 | 17 September 2008 11:36 |
Backing up Amiga HD to PC? Advice needed | Amiga1992 | support.Hardware | 7 | 08 March 2005 16:14 |
Advice needed! want to use a 15gb drive on amiga! | ElectroBlaster | support.Hardware | 15 | 16 May 2002 22:35 |
|
|