PUAE 2.3.0 beta series

[Hungry Horace]

why are the drives labeled FD0/1/3/4 instead of DF0/1/2/3 ?!

i couldnt get the build to do anything with my base config sadly...

Godmorning,

FYI: The following autogenerated files are still in your repo after your clean up yesterday


#
# modified: Makefile.in
# modified: src/sysconfig.h.in
#



Also git complains about the following files that seems to be missing newlines at the end of the file:

#
# src/md-fpp.h
# src/target.h
# src/tools/blitops.c
# src/tools/build68k.c
# src/tools/genblitter.c
# src/tools/gencomp.c
# src/tools/gencpu.c
# src/tools/genlinetoscr.c
# src/tools/missing.c
# src/tools/readcpu.c
# src/tools/writelog.c
#


Kind regards Uffe :-)

Hi again,

Here is another little patch for FreeBSD compat - for some reason it was not included in my first patch set.

kind regards Uffe

I dont know if it's just me, but if I use any other chipset other than AGA I get an erroneous rendering of the screen.

[GnoStiC]

it looks as if A2091 is not defined. please send your configure parameters.

Originally Posted by nexusle

tried it and get new errors:

Undefined symbols:
  "_a2091_free", referenced from:
  "_a2091_init", referenced from:
  "_a2091_reset", referenced from:

[GnoStiC]

please send your settings (or .uaerc if you have one) and a screen shot.

Originally Posted by vtlmks

I dont know if it's just me, but if I use any other chipset other than AGA I get an erroneous rendering of the screen.

[nexusle]

Originally Posted by GnoStiC

it looks as if A2091 is not defined. please send your configure parameters.

You'll find my configure Parameters in my First "Build" post in the Page before

Edit:

./configure CFLAGS="-m32" LDFLAGS="-m32" CPPFLAGS="-m32" --with-sdl --with-sdl-sound --with-sdl-gl --with-sdl-gfx --enable-drvsnd --enable-a2091 --enable-gayle --enable-ncr

Originally Posted by GnoStiC

please send your settings (or .uaerc if you have one) and a screen shot.

Here it is, sorry for delay!

puae-git.png

puae-git2.png

uaerc.txt

[Wicked_Digger]

Originally Posted by Hungry Horace

i couldnt get the build to do anything with my base config sadly...

It's just a demonstration! For example - what you may to do with Qt and several hours of work (in the Zone).

[nexusle]

Originally Posted by Wicked_Digger

It's just a demonstration! For example - what you may to do with Qt and several hours of work (in the Zone).

What's changed in the "new Version"?

[Wicked_Digger]

Added wellcomescreen with lists of recent and library configs, icons for buttons, open, start, stop, disk insert/eject is work now.

[GnoStiC]

thank you for the offer.
i plan to buy a z0j6001pm

Originally Posted by nexusle

If you want, I could lend you my old MacBook Pro (first Intel MacBook Pro with CoreDuo and ATI X1600) until you have purchased your own MacBook Pro. You only send me the shipping costs and tell my your address.

[GnoStiC]

i managed to duplicate the problem. i'll fix it asap, thank you.

Originally Posted by vtlmks

Here it is, sorry for delay!
puae-git.png
puae-git2.png
uaerc.txt

[nexusle]

Originally Posted by GnoStiC

z0j6001pm

What's this?!

Edit: Ahhhh I see, a Core i7 MBP. Good choice, I've the little brother (Core i5)

Hi to all. I just registered to post a note on this thread, but I am always happy to find an Amiga community.

First of all I'd like to thank my Turk neighbor Gnostic for his effort, as well as all participators, and wish them the best

I am an Ubuntu user and not very much experienced in compiling packages. I found the lack of updated documentation a problem. The required package libgtk1.2-dev mentioned in the documentation is not available in the repositiories. I had to download it manually, as well as libglib1.2ldbl (required by libgtk1.2-dev). I could not find xorg-core, required according to the puae documentation (docs/compiling.txt)

Then, I had a really hard time trying to understand or find out how I should start compiling. There was no ./configure script. I found out that I should run aclocal and/or autoconfig. Both returned some errors, whatever they are

I don't know if I managed to solve that problem, but eventually Google found for me a mailing list saying that all I should do was running ./bronx_.sh (perhaps this should be mentioned in /doc/compile.txt?). The compiling was completed (although with many warnings) and eventually I sudoed a make install

Then, my next problem was to find out how to run puae but the answer was simple since it replaces uae. But then I had other problems/questions.

First of all, the GUI is no much different than uae, other than some extra options, and the change in the name and version number (PUAE 2.3.0 instead of UAE 0.8.2); I expected a WinUAE-like gui, and this made me wonder if everything went well. I read in this forum that the GUI appears when I press F12-Enter, but it doesn't work. Also, there is no tab allowing me to change graphics of display options.

The major problem is this: when I run uae, not only the gui begins, but also the emulator. The "Stop" button doesn't work. When I close the emulator, the gui closes also. In short, I cannot have the gui without the emulator, and as a result I cannot change configuration or mount a hard disk.

I'd like to know if these are bugs or if my compiling didn't go as expected. Whatever the case, I hope I helped to contribute to the betterment of the documentation for the inexperienced user, or the project itself.

[Wicked_Digger]

Originally Posted by Gwydion

First of all, the GUI is no much different than uae, other than some extra options, and the change in the name and version number (PUAE 2.3.0 instead of UAE 0.8.2); I expected a WinUAE-like gui, and this made me wonder if everything went well. I read in this forum that the GUI appears when I press F12-Enter, but it doesn't work. Also, there is no tab allowing me to change graphics of display options.

The major problem is this: when I run uae, not only the gui begins, but also the emulator. The "Stop" button doesn't work. When I close the emulator, the gui closes also. In short, I cannot have the gui without the emulator, and as a result I cannot change configuration or mount a hard disk.

I'd like to know if these are bugs or if my compiling didn't go as expected. Whatever the case, I hope I helped to contribute to the betterment of the documentation for the inexperienced user, or the project itself.

Problems with GUI it's a tradition in UAE based projects
All projects inherits stupid idea - "Emulator must be launched in main thread".
But! In X (Linux) MacOS (and other?) windows message pump work only in main thread too. And we have a situation when GUI work only "between" emulator circles...
In my Qt port i broke this tradition (emulator work in separated thread) and have a fast emulator and normal GUI.

[Wicked_Digger]

New version of PUAE with Qt frontend in the Zone.

+ picasso96 support
+ keyboard (only eng.)
+ mouse (input) grab

Thanks for the replies but I didn't get something:
Did my compiling fail? Can I circumvent those "problems"?

If puae "runs the emulator in main thread" simply because of "tradition" then how come I am the first person who needs to mount a hard disk, and can't? What do other people do?

[Wicked_Digger]

Originally Posted by Gwydion

Thanks for the replies but I didn't get something:
Did my compiling fail? Can I circumvent those "problems"?

just run:

bootstrap.sh
configure
make

Originally Posted by Gwydion

If puae "runs the emulator in main thread" simply because of "tradition" then how come I am the first person who needs to mount a hard disk, and can't?

"tradition" - it's a sad joke But all other it's true.
In fact xUAE it's not a Virtual Machine, it's an Emulator. Main usecase: uae+config+disk(image with you favorite game) run uae with config and playing.

Originally Posted by Gwydion

What do other people do?

Editing config and run uae again...

[nexusle]

@Wicked_Digger

Picasso96 still doesn't work:

Attachment 26527