Indivision AGA MK2cr issues - Page 7

trixster · 19 October 2018, 07:28

I’d make a pretty poor rock star

glad the photos helped

ubermick · 22 October 2018, 23:21

Quote:

Originally Posted by trixster

I’d make a pretty poor rock star

glad the photos helped

Well, they did. And then the monitor died. (NEC EA192M which is supposed to support 23 pin out natively but... doesn't) Now I've got it going into a Dell widescreen U2413 and it looks horrific!

ubermick · 23 October 2018, 01:50

Right lads - help. Please.

After a few hours of messing with the Indivision config tool, I'm at my wit's end. I'm plugged into a Dell U2413 monitor (all I have at the minute) via DVI. Trying to use HighGFX have something decent with WHDload. Here's what I'm getting...

This isn't ideal, but it's doable. It's not filling the full screen which I assume is more a monitor issue since the Amiga is sending out a 1024x760 screen and this is a 1920x1200 monitor. (Can't find anything in the settings for zoom to fit, though..)

It's the VGA mode that I'm having issues with. Case in point with ye olde State of the Art demo fired up through WHDload....

The thing that I noticed on this was that it's still - despite being selected differently - saying that it's using PAL 800x600 as the VGA mode even though I don't have that selected in the config:

When I went through the setup and hit apply, the config tool did it thing and writes - but seems to always (when reopening the tool) default back to "Euro36" no matter how many times I select HighGFX.

Someone please tell me what I'm doing wrong!

Fairdinkem · 24 June 2023, 01:22

With my Indivision AGA MK2 cr the problem I am trying to solve is with games like the Settlers and Pinball Illusions the display area has the image scaled outside the viewing area.

I have adjusted the overscan area for PAL graphics and the text area as small as it can allow.
Do I need to edit my config somehow so the default area is smaller and if so how do I do this?
I am using the Hans 640x512 60hz config shared on EAB, I get a nice full 4:3 image on my CRT.
I have tried 768x576 yet the issue with the two games as mentioned above still happens.
I have an Indivision AGA MK 3 for my second A1200 with which I was able to have both games look correct.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Indivision 1200 AGA MK2cr scrolling question	schneidas	support.Hardware	46	16 January 2018 20:20
Delfina and indivision aga mk2cr	darkon	support.Hardware	1	07 October 2014 10:27
Indivision 1200 AGA MK2cr	Seblington	support.Hardware	11	25 June 2014 11:14
For Sale: Indivision AGA 1200 MK2cr	manic23	MarketPlace	9	13 October 2013 21:22
Indivision AGA 1200 MK2cr Question	manic23	support.Hardware	2	31 May 2013 13:59

19 October 2018, 07:28	#121
trixster Guru Meditating Join Date: Jun 2014 Location: England Posts: 2,337	I’d make a pretty poor rock star glad the photos helped

23 October 2018, 01:50	#123
ubermick Registered User Join Date: Jun 2012 Location: San Francisco-ish, via Ireland Posts: 114	Right lads - help. Please. After a few hours of messing with the Indivision config tool, I'm at my wit's end. I'm plugged into a Dell U2413 monitor (all I have at the minute) via DVI. Trying to use HighGFX have something decent with WHDload. Here's what I'm getting... This isn't ideal, but it's doable. It's not filling the full screen which I assume is more a monitor issue since the Amiga is sending out a 1024x760 screen and this is a 1920x1200 monitor. (Can't find anything in the settings for zoom to fit, though..) It's the VGA mode that I'm having issues with. Case in point with ye olde State of the Art demo fired up through WHDload.... The thing that I noticed on this was that it's still - despite being selected differently - saying that it's using PAL 800x600 as the VGA mode even though I don't have that selected in the config: When I went through the setup and hit apply, the config tool did it thing and writes - but seems to always (when reopening the tool) default back to "Euro36" no matter how many times I select HighGFX. Someone please tell me what I'm doing wrong!

24 June 2023, 01:22	#124
Fairdinkem Registered User Join Date: Oct 2021 Location: Koo Wee Rup / Australia Posts: 16	With my Indivision AGA MK2 cr the problem I am trying to solve is with games like the Settlers and Pinball Illusions the display area has the image scaled outside the viewing area. I have adjusted the overscan area for PAL graphics and the text area as small as it can allow. Do I need to edit my config somehow so the default area is smaller and if so how do I do this? I am using the Hans 640x512 60hz config shared on EAB, I get a nice full 4:3 image on my CRT. I have tried 768x576 yet the issue with the two games as mentioned above still happens. I have an Indivision AGA MK 3 for my second A1200 with which I was able to have both games look correct.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)