07 August 2015, 19:48 | #1 |
Registered User
Join Date: Feb 2015
Location: heywood, UK
Posts: 29
|
HELP installed wb3.1 on cf card
Installed wb3.1 on cf card to use in real amiga, its boots fine in winuae but not even seen in real amiga.
I did set to IDE auto, when installing . cheers ian |
07 August 2015, 23:19 | #2 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 6,985
|
Can you boot your real Amiga with the Install floppy disk and run HDToolbox to check if the CF card is actually recognised? If the real hardware does not recognise the CF card, there is nothing you can do except to try another CF card.
If the real Amiga sees the CF card, you should first go to the PC and use DiskPart to clean the card. Then go to the Amiga and create partitions there. Finally go back to the PC and use WinUAE to install the OS on the partition created before. We once had a thread here where somebody created partitions on the real Amiga and other partitions in WinUAE and the real Amiga's partitions were only seen on the real Amiga and the WinUAE partitions only in WinUAE, wherever the card was connected to. I think that DiskPart Clean was the solution for this. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why is there an interest beyond WB3.1? | methodman | support.WinUAE | 16 | 28 June 2015 18:59 |
Problems using PCMCIA 128MB CF Card on WB3.1 | clitosa | New to Emulation or Amiga scene | 29 | 18 November 2012 11:10 |
Please help me with WB3.1 and HDF | W4r3DeV1L | support.WinUAE | 4 | 17 September 2011 02:19 |
CF card with PFS3 and WB3.9 | AlfaRomeo | support.Apps | 17 | 07 March 2009 21:41 |
WB2.1 or WB3.1 or WB3.9 | Olecranon | New to Emulation or Amiga scene | 3 | 02 September 2006 18:42 |
|
|