ScanJuggler NEWS - scandoubler (and flickerfixer) for A1200/A4000 - Page 17

Marmes · 30 May 2015, 00:17

BENQ BL902TM might also work

fgh · 30 May 2015, 02:48

I picked up a BL902 earlier to check, but it didn't do 15kHz. Just said 'out of range' on my PAL A1200.

eXeler0 · 30 May 2015, 03:30

@fgh was that with any particular screenmode or just default 15.6kHz? Do you boot wb from CF/HDD or just oldskool boot to "insert disk" -screen?

fgh · 30 May 2015, 03:36

It went 'out of range' immediately, didn't display the boot colours or the early boot menu.

amigoun · 30 May 2015, 16:53

You need BL912 which is newer model and works fine.

dirkies · 31 May 2015, 12:59

I am not aware of any BenQ lcd doing 15Khz, all models mentioned here are just the usual 31-83Khz hsync/55-76 vsync crap.
It was already hard for me to find a 50hz capable lcd for my Indivision (perfect scrolling using a ViewSonic VA951S now), but a 15Khz lcd these days...good luck with that!

amigoun · 31 May 2015, 14:51

You probably missed the discussion about the monitor here:
http://www.amibay.com/showthread.php...tor-for-amigas
And my real test with Amiga:
http://www.amibay.com/showthread.php...SUB%29-Adapter

eXeler0 · 31 May 2015, 18:38

@dirkies, as @amigoun said, theres a bunch of us who already bought the BenQ BL702A. (I got mine from Amazon. Its in stock. No problems at all to get one) It does 15kHz just fine even though its not easy to find an official specs listing that actually says that.. (and that includes BenQs official site).

digiflip · 14 June 2015, 21:25

my last email from dezz: "Hi,

I just fixed two long lasting issues, one is sw, the other is hw related. I had to patch the PCB's with a little thin PCB sheet to relocate a few lines to ease on the working of the FPGA, and so the timings in it. (I will be barely visible.) I'm now waiting for these sheets to arrive, then I'm preparing the cards and hopefully I can send it to you this month.

2015.06.12. 6:47 keltezéssel, digiflip írta:

Any news "

Marmes · 16 June 2015, 01:46

He told me that a year ago.
He said this month of June. Well, he didn't state the year.

Quote:

Originally Posted by digiflip

my last email from dezz: "Hi,

I just fixed two long lasting issues, one is sw, the other is hw related. I had to patch the PCB's with a little thin PCB sheet to relocate a few lines to ease on the working of the FPGA, and so the timings in it. (I will be barely visible.) I'm now waiting for these sheets to arrive, then I'm preparing the cards and hopefully I can send it to you this month.

2015.06.12. 6:47 keltezéssel, digiflip írta:

Any news "

nemazoty · 17 July 2015, 09:51

Just a quick translation from a hungarian forum from Dezz:

After one and a half year illness Dezz is back. 30 pieces XAGA and 15 pieces XAGA Lite is in progress.

brett71 · 17 July 2015, 16:58

Seems to me like the vapor has lifted...

jbenam · 17 July 2015, 19:13

Quote:

Originally Posted by brett71

Seems to me like the vapor has lifted...

Assembling them might require another year or two, though!

brett71 · 17 July 2015, 21:25

Quote:

Originally Posted by jbenam

Assembling them might require another year or two, though!

Hey, I never said the vapor had completely burned off! Trying to keep expectations low...

Seriously, though, I hope that these things do get made and shipped out to the people who'd paid for them.

Marmes · 18 July 2015, 01:48

I just want to know if mine will arrive

jcarvalho · 20 July 2015, 15:02

Sorry for being so unbeliever... But only when it arrives at my door...

RobertB · 22 July 2015, 08:11

Quote:

Originally Posted by amigoun

You probably missed the discussion about the monitor here:
http://www.amibay.com/showthread.php...tor-for-amigas
And my real test with Amiga:
http://www.amibay.com/showthread.php...SUB%29-Adapter

Based on the discussion here and at Amibay and while I was in England in June, I bought the BenQ BL912, the 19-inch big brother of the BenQ BL702A. I brought it back to California in my checked-in suitcase. It works very well, and I have been showing it off to the Fresno Commodore User Group, to the Southern California Commodore & Amiga Network, and at the Commodore Vegas Expo.

Still in Las Vegas after CommVEx,
Robert Bernardo
Fresno Commodore User Group
http://www.dickestel.com/fcug.htm

cugar124 · 06 August 2015, 22:16

Hi Guys has anyone got one of these yet any youtube reviews

dirkies · 07 August 2015, 13:39

I can confirm since yesterday a BL912 does 15Khz! Weird to see my A500 NTSC displayed on LCD without the indivision ECS !

Now I wonder if there is any reason to keep the Indivision in my A500 PAL and just buy another BL912 instead for it (?). Maybe the scanline feature is a worthly excuse to keep it

Eny- · 07 August 2015, 16:40

dirkies, did you use a VGA adapter?

I'm searching for a DB23 to HDD15 cable and I can't find any?

06 August 2015, 22:16	#338
cugar124 Registered User Join Date: Jun 2012 Location: Belfast Posts: 38	anyone got one yet Hi Guys has anyone got one of these yet any youtube reviews

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where can I buy a flickerfixer/scandoubler?	mange_lars	support.Hardware	5	28 September 2010 09:36
ScanDoubler + FlickerFixer	Test Driver	MarketPlace	6	15 September 2009 01:23
FS: DCE Scandoubler/FlickerFixer for A1200	Gavilan	MarketPlace	2	23 August 2009 23:09
Scandoubler / Flickerfixer Production?	Penemy	Amiga scene	48	21 February 2007 11:18
Internal Flickerfixer Flickermagic scandoubler A1200/A4000	Effy	MarketPlace	12	09 December 2005 16:18

30 May 2015, 00:17	#321
Marmes Registered User Join Date: Jun 2012 Location: Portugal Posts: 105	BENQ BL902TM might also work

30 May 2015, 02:48	#322
fgh Registered User Join Date: Dec 2010 Location: Norway Posts: 659	I picked up a BL902 earlier to check, but it didn't do 15kHz. Just said 'out of range' on my PAL A1200.

30 May 2015, 03:30	#323
eXeler0 Registered User Join Date: Feb 2015 Location: Sweden Age: 45 Posts: 1,582	@fgh was that with any particular screenmode or just default 15.6kHz? Do you boot wb from CF/HDD or just oldskool boot to "insert disk" -screen?

30 May 2015, 03:36	#324
fgh Registered User Join Date: Dec 2010 Location: Norway Posts: 659	It went 'out of range' immediately, didn't display the boot colours or the early boot menu.

30 May 2015, 16:53	#325
amigoun Registered User Join Date: May 2010 Location: Czech Rep Posts: 550	You need BL912 which is newer model and works fine.

31 May 2015, 12:59	#326
dirkies Zone Friend Join Date: Aug 2002 Location: Belgium Age: 46 Posts: 1,222	I am not aware of any BenQ lcd doing 15Khz, all models mentioned here are just the usual 31-83Khz hsync/55-76 vsync crap. It was already hard for me to find a 50hz capable lcd for my Indivision (perfect scrolling using a ViewSonic VA951S now), but a 15Khz lcd these days...good luck with that!

31 May 2015, 14:51	#327
amigoun Registered User Join Date: May 2010 Location: Czech Rep Posts: 550	You probably missed the discussion about the monitor here: http://www.amibay.com/showthread.php...tor-for-amigas And my real test with Amiga: http://www.amibay.com/showthread.php...SUB%29-Adapter

31 May 2015, 18:38	#328
eXeler0 Registered User Join Date: Feb 2015 Location: Sweden Age: 45 Posts: 1,582	@dirkies, as @amigoun said, theres a bunch of us who already bought the BenQ BL702A. (I got mine from Amazon. Its in stock. No problems at all to get one) It does 15kHz just fine even though its not easy to find an official specs listing that actually says that.. (and that includes BenQs official site).

14 June 2015, 21:25	#329
digiflip Registered User Join Date: Apr 2011 Location: Nottingham, United Kingdom Posts: 104	my last email from dezz: "Hi, I just fixed two long lasting issues, one is sw, the other is hw related. I had to patch the PCB's with a little thin PCB sheet to relocate a few lines to ease on the working of the FPGA, and so the timings in it. (I will be barely visible.) I'm now waiting for these sheets to arrive, then I'm preparing the cards and hopefully I can send it to you this month. 2015.06.12. 6:47 keltezéssel, digiflip írta: Any news "

17 July 2015, 09:51	#331
nemazoty WHD/oldskool maniac Join Date: Dec 2003 Location: Pecs/Hungary Age: 45 Posts: 96	Just a quick translation from a hungarian forum from Dezz: After one and a half year illness Dezz is back. 30 pieces XAGA and 15 pieces XAGA Lite is in progress.

17 July 2015, 16:58	#332
brett71 Registered User Join Date: May 2010 Location: Ames, IA, USA Posts: 367	Seems to me like the vapor has lifted...

18 July 2015, 01:48	#335
Marmes Registered User Join Date: Jun 2012 Location: Portugal Posts: 105	I just want to know if mine will arrive

20 July 2015, 15:02	#336
jcarvalho Registered User Join Date: Jul 2013 Location: Oporto / Portugal Age: 47 Posts: 27	Sorry for being so unbeliever... But only when it arrives at my door...

07 August 2015, 13:39	#339
dirkies Zone Friend Join Date: Aug 2002 Location: Belgium Age: 46 Posts: 1,222	I can confirm since yesterday a BL912 does 15Khz! Weird to see my A500 NTSC displayed on LCD without the indivision ECS ! Now I wonder if there is any reason to keep the Indivision in my A500 PAL and just buy another BL912 instead for it (?). Maybe the scanline feature is a worthly excuse to keep it

07 August 2015, 16:40	#340
Eny- R3tr0 G4m3r Join Date: May 2004 Location: Lisbon - Portugal Age: 39 Posts: 327	dirkies, did you use a VGA adapter? I'm searching for a DB23 to HDD15 cable and I can't find any?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)