ClassicWB issues ADV pack...

Macca · 21 December 2004, 11:37

Don't know whether it is me or a bug in the actual thing... anyway here goes:

Latest version of WinUAE (0.9.91) with Kickstart 3.1

Literally running ClassicWB as master HD and a folder on HD as DH1 (so I can set it all up ready for copying over to Amiga).

When it installs at the beginning it asks for a Workbench disk - put Workbench 3.1 in there and it does it's thing... then asks if I want to install the copper addon.. if I say yes it crashes and if I say no on restart it crashes?

Is it a known bug or have I done something stupid?

Cheers,

Macca

Bloodwych · 21 December 2004, 12:28

Been testing - I have a copy of all the release packs here and they work fine in WinUAE 0.825 with 3.1 disk/ROMS and a directory added as DH1:

Try building a config from scratch as the one I provided is from the older 0.825 version.

Macca · 21 December 2004, 12:32

I have done mate.

Built the config from nothing - I'm guessing that the problem probably lies in WinUAE as I had it working on 9.90

Strange but true!

Macca

Bloodwych · 21 December 2004, 12:34

I'll test with the lastest to confirm.........

Bloodwych · 21 December 2004, 12:54

.....and it works fine. I used this config, but in a Win9x environment (WinME). I also tried it with a directory as DH1, still fine.

Hope you manage to track down the problem.

MSC · 21 December 2004, 14:02

Also works fine in WinXP environment. Latest Winuae.

I have 5 folders set up as DH*: drives. Tools, games, etc..

Macca · 21 December 2004, 15:21

Hmm very strange....

Will give it more testing and try and track down the problem...

Cheers,

Macca

Macca · 25 December 2004, 16:19

OK this get's even weirder:

Tried ClassicWB with a Workbench 3.0 Disk - this get's further but when you try and install the copper support it just does nothing... so anyway unpakced a new hard-drive and then tried it without copper support - no problem... except on the restart it then crashes with the attached error...

Using WinUAE v0.92 I'm guessing it must be something strange I'm doing- will try the config file in this post then report back.

Macca

Macca · 25 December 2004, 16:43

Strange works with the test configuration above but not with mine - the only real difference in mine is I don't have an FPU setup and I have less memory - nevermind all working now..

Take care

Macca

Bloodwych · 25 December 2004, 20:55

I still don't have any problems whatsoever. Must be a WinUAE config issue unique to your machine - definitely nothing wrong with the packs.

Only the P96 version requires an FPU, but only for certain programs like Amiamp and Perfect Paint. Obviously the install procedure just uses a plain old script which doesn’t require anything special to run.

The normal versions work on anything I throw at them, Workbench/ROM 3.0 or 3.1.

The minimum config I tried was 2MB chip, 2MB fast, 68EC020, AGA, 3.0. This and anything above ran without a hitch.

Macca · 26 December 2004, 21:27

I'll put it down to weirdness mate..

Working now.. no logical reason for it not working before but there must be one strange bug in WinUAE and I found it... anyway all is well with the world... thanks for the help...

Macca

21 December 2004, 11:37	#1
Macca Zone Friend Join Date: Jul 2004 Location: Gloucester Posts: 697	ClassicWB issues ADV pack... Don't know whether it is me or a bug in the actual thing... anyway here goes: Latest version of WinUAE (0.9.91) with Kickstart 3.1 Literally running ClassicWB as master HD and a folder on HD as DH1 (so I can set it all up ready for copying over to Amiga). When it installs at the beginning it asks for a Workbench disk - put Workbench 3.1 in there and it does it's thing... then asks if I want to install the copper addon.. if I say yes it crashes and if I say no on restart it crashes? Is it a known bug or have I done something stupid? Cheers, Macca

25 December 2004, 16:19	#8
Macca Zone Friend Join Date: Jul 2004 Location: Gloucester Posts: 697	OK this get's even weirder: Tried ClassicWB with a Workbench 3.0 Disk - this get's further but when you try and install the copper support it just does nothing... so anyway unpakced a new hard-drive and then tried it without copper support - no problem... except on the restart it then crashes with the attached error... Using WinUAE v0.92 I'm guessing it must be something strange I'm doing- will try the config file in this post then report back. Macca Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mysterious double boot ClassicWB ADV SP	Rishca	project.ClassicWB	11	11 July 2011 17:25
classicwb adv	lambrettadave	project.ClassicWB	7	27 October 2010 16:13
ClassicWB ADV/ADVSP on PAL TV	vimfuego	project.ClassicWB	6	08 January 2010 19:28
ClassicWB ADV Dopus & AWeb errors	r0jaws	project.ClassicWB	7	03 August 2008 21:05
Files not found. ClassicWB ADV / WB 3.1	Macca	project.ClassicWB	3	24 May 2008 15:18

21 December 2004, 12:28	#2
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Been testing - I have a copy of all the release packs here and they work fine in WinUAE 0.825 with 3.1 disk/ROMS and a directory added as DH1: Try building a config from scratch as the one I provided is from the older 0.825 version.

21 December 2004, 12:32	#3
Macca Zone Friend Join Date: Jul 2004 Location: Gloucester Posts: 697	I have done mate. Built the config from nothing - I'm guessing that the problem probably lies in WinUAE as I had it working on 9.90 Strange but true! Macca

21 December 2004, 12:34	#4
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	I'll test with the lastest to confirm.........

21 December 2004, 14:02	#6
MSC Zone Friend Join Date: Aug 2004 Location: UK Age: 52 Posts: 137	Also works fine in WinXP environment. Latest Winuae. I have 5 folders set up as DH*: drives. Tools, games, etc..

21 December 2004, 15:21	#7
Macca Zone Friend Join Date: Jul 2004 Location: Gloucester Posts: 697	Hmm very strange.... Will give it more testing and try and track down the problem... Cheers, Macca

25 December 2004, 16:43	#9
Macca Zone Friend Join Date: Jul 2004 Location: Gloucester Posts: 697	Strange works with the test configuration above but not with mine - the only real difference in mine is I don't have an FPU setup and I have less memory - nevermind all working now.. Take care Macca

25 December 2004, 20:55	#10
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	I still don't have any problems whatsoever. Must be a WinUAE config issue unique to your machine - definitely nothing wrong with the packs. Only the P96 version requires an FPU, but only for certain programs like Amiamp and Perfect Paint. Obviously the install procedure just uses a plain old script which doesn’t require anything special to run. The normal versions work on anything I throw at them, Workbench/ROM 3.0 or 3.1. The minimum config I tried was 2MB chip, 2MB fast, 68EC020, AGA, 3.0. This and anything above ran without a hitch.

26 December 2004, 21:27	#11
Macca Zone Friend Join Date: Jul 2004 Location: Gloucester Posts: 697	I'll put it down to weirdness mate.. Working now.. no logical reason for it not working before but there must be one strange bug in WinUAE and I found it... anyway all is well with the world... thanks for the help... Macca

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)