ScanJuggler NEWS - scandoubler (and flickerfixer) for A1200/A4000 - Page 7

Mohican · 17 December 2013, 14:25

Quote:

Originally Posted by Exit

does it have rtg capabilities?

--> It will be having some.

Quote:

Originally Posted by seb132

Hope it will happen for Xmas...

What about the people who sent payments for pre-orders nearly a year ago ?

--> (?) There wasn't international pre-orders that early.

Quote:

Originally Posted by seb132

Can we still send pre-orders, by the way ???

--> Ask Dezz on it. Look here for contacts: http://wiki.amigaspirit.hu/index.php/ScanJuggler_en

Quote:

Originally Posted by seb132

There is a SCANJUGGLER for sale on AmiBay today... looks like a rev.1 though... /me wonder where this one come from...

--> That is a very old and dumb one (like rev.0.00001 of the Lite) from 2001.

Mohican · 17 December 2013, 14:26

Quote:

Originally Posted by Nostromo

Do you get flickering if you use Hi-Res?

--> No.

Quote:

Originally Posted by Nostromo

Also, is output DVI-I (analogue) or DVD-D (digital)?

--> DVI-I, which is both analogue and digital.

Predseda · 17 December 2013, 14:37

Nice trick with HDD cradle as a heatsink.

Wolfus · 17 December 2013, 18:34

I really like SJ's design but I am not sure what will happen if you install classic 2,5" disk into it's cradle.

I've already seen technical specifications of FULL/LITE versions but I am not sure what is the difference for "normal" user. What would I miss if I buy LITE version?

Machico2012 · 17 December 2013, 20:48

Also one thing to be cleared: will be there some vertical banding through solid colours and a blinking effect when moving solid objects around the screen
sync delay?

Mohican · 17 December 2013, 21:26

Quote:

Originally Posted by Machico2012

Also one thing to be cleared: will be there some vertical banding through solid colours and a blinking effect when moving solid objects around the screen
sync delay?

--> Only in interlaced modes. (It's because of differring image content in the fields that are displayed altogether. You need a rather special algorithm and much more processing power to avoid it. Perhaps it could be done by an add-on board.)

Mohican · 17 December 2013, 21:39

Quote:

Originally Posted by Wolfus

I really like SJ's design but I am not sure what will happen if you install classic 2,5" disk into it's cradle.

--> You may need spacers under the drive to lift the drive a bit, and only 3 screws can be used.

Quote:

Originally Posted by Wolfus

I've already seen technical specifications of FULL/LITE versions but I am not sure what is the difference for "normal" user. What would I miss if I buy LITE version?

--> Not sure what do you mean by normal user, but mainly the Lite one lacks "flicker-fixing" (elimination of interlace line-flicker), frame-rate conversion, SHiRes support, DVI, expandability and some other handy features. Although, it may be good for only running games and demos.

Nostromo · 17 December 2013, 22:21

Can you expand on the RTG capabilities? Thank you =)

seb132 · 17 December 2013, 22:24

Would there be any RTG capability? How?

Mohican · 19 December 2013, 21:41

It will support some form of RTG. More on it a little later.

Methanoid · 19 December 2013, 22:54

OK I'm finally interested.. How much and how soon ;-)

NovaCoder · 20 December 2013, 01:59

Quote:

Originally Posted by Mohican

It will support some form of RTG. More on it a little later.

Sounds very interesting, hopefully you are adding some CyberGFX API support then it will work for some of my ports.

It wouldn't need much, the main functions I use are:

Code:

// Setup stuff
IsCyberModeID()
BestCModeIDTags()
GetCyberIDAttr()


// Used for the actual screen update.
LockBitMapTags()

yssing · 21 December 2013, 12:30

looks like I will be selling my indivision aga mkII soon

Mohican · 22 December 2013, 00:12

It's best to contact Dezz directly. Look at the link at the top of the page, please.

BTW, Dezz told one part couln't get delivered before the holidays, but early January. It doesn't affect production much as this one can be placed on the boards subsequently. 20-25 cards can be produced till beginning of January. The PCB of the newer Switcher could also be ordered to be prepared by beginning of January only. But that one can be assembled fast.

ps. hush, there will be a little surprise for Christmas

seb132 · 22 December 2013, 00:28

Yes. I'm in for one or two... Dezz is very nice. Hihi.

Akiko · 22 December 2013, 06:50

Looks even more awesome

Is A4000T and CD32 versions still planned?

Exit · 22 December 2013, 14:44

i'will start saving some money for this one, the rtg capabilties and the size of the board makes it very interesting..

yssing · 24 December 2013, 16:59

As will I. As soon as I can order one I will

Nostromo · 25 December 2013, 08:58

Quote:

Originally Posted by Mohican

ps. hush, there will be a little surprise for Christmas

So I am going to sit here all day hitting F5 every 30 seconds

Nostromo · 25 December 2013, 20:22

Xmas is almost over

22 December 2013, 00:28	#135
seb132 French in Australia Join Date: May 2012 Location: Gold Coast Age: 52 Posts: 507	Yes. I'm in for one or two... Dezz is very nice. Hihi. Last edited by seb132; 22 December 2013 at 00:54.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where can I buy a flickerfixer/scandoubler?	mange_lars	support.Hardware	5	28 September 2010 08:36
ScanDoubler + FlickerFixer	Test Driver	MarketPlace	6	15 September 2009 00:23
FS: DCE Scandoubler/FlickerFixer for A1200	Gavilan	MarketPlace	2	23 August 2009 22:09
Scandoubler / Flickerfixer Production?	Penemy	Amiga scene	48	21 February 2007 10:18
Internal Flickerfixer Flickermagic scandoubler A1200/A4000	Effy	MarketPlace	12	09 December 2005 15:18

17 December 2013, 14:37	#123
Predseda Puttymoon inhabitant Join Date: Mar 2007 Location: Tromaville Age: 46 Posts: 7,539	Nice trick with HDD cradle as a heatsink.

17 December 2013, 18:34	#124
Wolfus Registered User Join Date: Jan 2009 Location: Slovakia Age: 41 Posts: 84	I really like SJ's design but I am not sure what will happen if you install classic 2,5" disk into it's cradle. I've already seen technical specifications of FULL/LITE versions but I am not sure what is the difference for "normal" user. What would I miss if I buy LITE version?

17 December 2013, 20:48	#125
Machico2012 Registered User Join Date: Apr 2013 Location: Madeira Posts: 24	Also one thing to be cleared: will be there some vertical banding through solid colours and a blinking effect when moving solid objects around the screen sync delay?

17 December 2013, 22:21	#128
Nostromo Registered User Join Date: Dec 2008 Location: The World! Posts: 454	Can you expand on the RTG capabilities? Thank you =)

17 December 2013, 22:24	#129
seb132 French in Australia Join Date: May 2012 Location: Gold Coast Age: 52 Posts: 507	Would there be any RTG capability? How?

19 December 2013, 21:41	#130
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	It will support some form of RTG. More on it a little later.

19 December 2013, 22:54	#131
Methanoid Retired Quartex Sysop Join Date: Sep 2001 Location: Roman Verulamium Age: 58 Posts: 1,873	OK I'm finally interested.. How much and how soon ;-)

21 December 2013, 12:30	#133
yssing Registered User Join Date: Oct 2012 Location: Denmark Posts: 22	looks like I will be selling my indivision aga mkII soon

22 December 2013, 00:12	#134
Mohican Registered User Join Date: Nov 2009 Location: Budapest / Hungary Age: 50 Posts: 67	It's best to contact Dezz directly. Look at the link at the top of the page, please. BTW, Dezz told one part couln't get delivered before the holidays, but early January. It doesn't affect production much as this one can be placed on the boards subsequently. 20-25 cards can be produced till beginning of January. The PCB of the newer Switcher could also be ordered to be prepared by beginning of January only. But that one can be assembled fast. ps. hush, there will be a little surprise for Christmas

22 December 2013, 06:50	#136
Akiko Registered User Join Date: Feb 2009 Location: UK Posts: 249	Looks even more awesome Is A4000T and CD32 versions still planned?

22 December 2013, 14:44	#137
Exit Registered User Join Date: Aug 2007 Location: Holland/The netherlands Age: 49 Posts: 122	i'will start saving some money for this one, the rtg capabilties and the size of the board makes it very interesting..

24 December 2013, 16:59	#138
yssing Registered User Join Date: Oct 2012 Location: Denmark Posts: 22	As will I. As soon as I can order one I will

25 December 2013, 20:22	#140
Nostromo Registered User Join Date: Dec 2008 Location: The World! Posts: 454	Xmas is almost over

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)