05 August 2006, 06:12 | #1 |
Posts: n/a
|
Help reviving A2000 rev 6.2
I have an A2000 that was giving me yellow screens, green screens.. only when the 8372A Agnus was plugged in. It appears I have fixed the funky Agnus slot and my 2000 now goes from dark gray to light gray to white as it is supposed to. But it stays at the white screen... no "insert a disk" screen.
Any ideas what could be wrong??? |
06 August 2006, 09:25 | #2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,862
|
CIAs next? Start by swapping them around to see if it gets any further.
|
06 August 2006, 12:03 | #3 |
Ya' like it Retr0?
Join Date: Jul 2005
Location: United Kingdom
Age: 49
Posts: 9,768
|
it could be a memory issue,
if i remember correctly after reading a recent post on an A3000 with a simialr boot problem, reseating or replacing the ram might be a method to solve it. another thing to make sure of ( wich i am sure you have lol ) all other adapter cards to be removed (including scsi, mem-boards etc... everything infact. fingers crossed for ya |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help for A2000 rev 6.4 board! | genny | support.Hardware | 3 | 16 April 2011 05:26 |
A2000 Rev 4? | Fingerlickin_B | support.Hardware | 29 | 08 October 2010 19:29 |
Board Revision ADVICE Rev 1D.1 vs Rev 2B | W4r3DeV1L | support.Other | 1 | 02 December 2008 23:44 |
has anyone dislodged CIAs from a rev 6a?? possible defect on rev 6a?? | NfernalNfluence | support.Hardware | 3 | 27 August 2007 10:27 |
Making an OCS A2000 (Rev 4.6) to an ECS A2000 | Drake008@ | support.Hardware | 15 | 27 February 2007 22:24 |
|
|