CAVIAR collection! - Page 4

Crashdisk · 18 March 2012, 14:43

Thank you ^^ However this is not the same dump ...!?

Supamax · 19 March 2012, 20:30

Quote:

Originally Posted by Crashdisk

Thank you ^^ However this is not the same dump ...!?

I'm going to check Fermix upload

.
I think it's better than what I and others had, because its size is bigger. Almost surely he didn't get it from eMule...

Fermix, do you have ISO images of other Caviar disks?
Perhaps with different size from what I and other mates in this thread uploaded?

Crashdisk · 19 March 2012, 21:29

@Supamax
Can you upload your temporary emule file (caviar14):
0xx.part
0xx.part.met

I would try an experiment ^^

Supamax · 19 March 2012, 23:16

UPDATE:

When mounted in Daemon Tools, Fermix's 752MB ISO appears as 654MB, exactly as eMule's file.
Perhaps it was imaged with some redundant info.
However... now we have it

.

@ Crashdisk: OK

.
It will take some time though...

Crashdisk · 19 March 2012, 23:20

Same files but burned with other soft...
MAKECD vs CLICK'N BURN PRO 2.0 - BUILD 2.0.763
@Supamax
no problem

Supamax · 20 March 2012, 00:22

Quote:

Originally Posted by Crashdisk

Same files but burned with other soft...
MAKECD vs CLICK'N BURN PRO 2.0 - BUILD 2.0.763

You're probably right.
When I mount the Caviar 14 ISO with Daemon Tools I see a 654MB disk with a RAW file system (instead of CDFS).
How did you spot that they are exactly MAKECD and CLICK'N BURN PRO 2.0 - BUILD 2.0.763 ???

UPDATE/CORRECTION:
I mounted Caviar 15 with Daemon Tools and Windows shows a CDFS file system. It seems ok apparently... but why does ISOBuster show errors / retrieved files?

And who put on the Magix server the file '@FTP Maintainers attention needed for all cd Images on this ftp.txt' (see my post #57)?

My doubt was: are perhaps these CDs to be opened from within Amiga OS? (but, thinking about it, probably not, since Amiga CD support is for CDFS too)

Fermix · 20 March 2012, 08:58

Quote:

Originally Posted by Supamax

Fermix, do you have ISO images of other Caviar disks?
Perhaps with different size from what I and other mates in this thread uploaded?

I have an image backup of all my amiga cd´s in a 1Tb external hd.
Have also the cds so i can backup again any cd with other soft.

Supamax · 20 March 2012, 18:52

Quote:

Originally Posted by Fermix

I have an image backup of all my amiga cd´s in a 1Tb external hd.
Have also the cds so i can backup again any cd with other soft.

Uh! Great, good to know!

By the way, a mate asked me about the AMICD set (another spanish collection). Just in case... do you own some AMICDs?
As far as I know, they can't be found anywhere

.

EDIT: Whooops!!!! Sorry mate, I didn't see your thread here http://eab.abime.net/showthread.php?t=63593.

Supamax · 21 March 2012, 01:04

Quote:

Originally Posted by Crashdisk

@Supamax
Can you upload your temporary emule file (caviar14):
0xx.part
0xx.part.met

I would try an experiment ^^

Done

.
You can find it in the Magix server, 'Supamax' folder. The file name is 'Caviar14_eMule_partial.rar'

Crashdisk · 21 March 2012, 06:17

Thank you ^^

Supamax · 21 March 2012, 15:34

Update ('Supamax' folder on the server):

Coleccion Software Commodore Amiga Caviar vol. 03 -by nenet (no APC-TCP software).rar (500 MB)

I have removed 2 programs by APC & TCP software (see posts #36 and following).
Enjoy

.

Crashdisk · 21 March 2012, 20:19

Quote:

Originally Posted by Supamax

Done

.
You can find it in the Magix server, 'Supamax' folder. The file name is 'Caviar14_eMule_partial.rar'

done at 98.5%

Supamax · 21 March 2012, 21:24

Quote:

Originally Posted by Crashdisk

done at 98.5%

??

Crashdisk · 21 March 2012, 21:33

I fix your temporary file ^^

Supamax · 21 March 2012, 21:39

Quote:

Originally Posted by Crashdisk

I fix your temporary file ^^

Oooh, thank you!

I think the content will be equal to Fermix ISO (apart from the missing part from mine), because it would seem that Fermix dumped his original CD using bigger sector setting (hence the bigger .iso with RAW file system). I'll compare your resulting ISO with Fermix's.

Thank you for your fixing work

.

EDIT:
Crashdisk, perhaps you could do the comparing work between my .iso (fixed by you) and Fermix .iso ? I suspect you're better than me at that

.
Only if you have time, otherwise let me know and I'll do it

Crashdisk · 21 March 2012, 22:02

Quote:

Originally Posted by Supamax

Crashdisk, perhaps you could do the comparing work between my .iso (fixed by you) and Fermix .iso ? I suspect you're better than me at that

.
Only if you have time, otherwise let me know and I'll do it

these are exactly the same files

I finished the repair

.
I share the results on the Kad network...for the moment.

Supamax · 22 March 2012, 00:46

Quote:

Originally Posted by Crashdisk

these are exactly the same files

I finished the repair

.

Ok then

, thanks a lot!
I'll make a normal CDFS ISO from Fermix's 'RAW' ISO and I'll upload it (WinRARred) in my 'Supamax' folder on the server, just for completeness.

Quote:

I share the results on the Kad network...for the moment.

'Kad network' ??

Crashdisk · 22 March 2012, 06:41

@ Supamax

Kad

28 March 2012, 00:21

Hi,

great collection, thank you !!

But, some directories are empty in the Caviar 15 ISO of Supamax.
Fermix, could you upload your Caviar 15 ISO ?
Could you also upload Caviar 16 (1 & 2) ISO too ?

Thanks !

Very best regards,
Franck

Supamax · 30 March 2012, 19:41

Quote:

Originally Posted by fpachon

Could you also upload Caviar 16 (1 & 2) ISO too ?

Caviar #16 1 & 2 ?????
As far as I know, the collection ends at #15...

19 March 2012, 23:16	#64
Supamax Da Digger :) Join Date: Nov 2008 Location: Monza, Italy Posts: 2,822	UPDATE: When mounted in Daemon Tools, Fermix's 752MB ISO appears as 654MB, exactly as eMule's file. Perhaps it was imaged with some redundant info. However... now we have it . @ Crashdisk: OK . It will take some time though... Last edited by Supamax; 20 March 2012 at 00:29.

19 March 2012, 23:20	#65
Crashdisk Moderator Join Date: Jun 2009 Location: France Age: 46 Posts: 1,985	Same files but burned with other soft... MAKECD vs CLICK'N BURN PRO 2.0 - BUILD 2.0.763 @Supamax no problem Last edited by Crashdisk; 19 March 2012 at 23:24. Reason: Updated info

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Old PC CD Collection	TheBoss	Retrogaming General Discussion	7	10 July 2013 09:23
[Found: Gilbert - Escape from Drill] green monster and flying caviar^^	harrihonk	Looking for a game name ?	2	06 February 2009 11:37
Now this is some collection!	Paul_s	Nostalgia & memories	3	30 July 2007 16:13
A disk from 17 BIT COLLECTION or PD SOFT COLLECTION	yurifox	request.Apps	5	17 April 2007 05:40
Wanted >> Amiga Virus Free PD Collection & Fred Fish Collection	Kitty	request.Demos	34	06 January 2006 20:30

18 March 2012, 14:43	#61
Crashdisk Moderator Join Date: Jun 2009 Location: France Age: 46 Posts: 1,985	Thank you ^^ However this is not the same dump ...!?

19 March 2012, 21:29	#63
Crashdisk Moderator Join Date: Jun 2009 Location: France Age: 46 Posts: 1,985	@Supamax Can you upload your temporary emule file (caviar14): 0xx.part 0xx.part.met I would try an experiment ^^

21 March 2012, 06:17	#70
Crashdisk Moderator Join Date: Jun 2009 Location: France Age: 46 Posts: 1,985	Thank you ^^

21 March 2012, 15:34	#71
Supamax Da Digger :) Join Date: Nov 2008 Location: Monza, Italy Posts: 2,822	Update ('Supamax' folder on the server): Coleccion Software Commodore Amiga Caviar vol. 03 -by nenet (no APC-TCP software).rar (500 MB) I have removed 2 programs by APC & TCP software (see posts #36 and following). Enjoy .

21 March 2012, 21:33	#74
Crashdisk Moderator Join Date: Jun 2009 Location: France Age: 46 Posts: 1,985	I fix your temporary file ^^

22 March 2012, 06:41	#78
Crashdisk Moderator Join Date: Jun 2009 Location: France Age: 46 Posts: 1,985	@ Supamax Kad

28 March 2012, 00:21	#79
fpachon Posts: n/a	Hi, great collection, thank you !! But, some directories are empty in the Caviar 15 ISO of Supamax. Fermix, could you upload your Caviar 15 ISO ? Could you also upload Caviar 16 (1 & 2) ISO too ? Thanks ! Very best regards, Franck

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)