Indivision CD32 problems :(

[gibs]

@FOL
I have centered my workbench with success. Unfortunately, when I launch games, the scrollings are not smooth anymore. Do you know which settings I should not reach in order to keep the smoothness ?

Here are the settings : http://dl.dropbox.com/u/1566495/CD32/IndiSettings.JPG

[Jope]

Vsync has to be 50 or 100Hz, else it will always result in tearing.

If you can't run it under 53Hz, buy a different monitor.

[gibs]

Originally Posted by Jope

Vsync has to be 50 or 100Hz, else it will always result in tearing.

If you can't run it under 53Hz, buy a different monitor.

Ok, thanks for the info.
I can run at 50,6 hz which is smooth, therefore I have a black border.
I'm happy with that even if I would have preferred fullscreen.

[TheCorfiot]

Just a bit offtopic.

This is the first I've heard of Neonlight's WB CD and I've downloaded it, absolutely fantastic & so useful.

Excellent Resource.

TC

[Fingerlickin_B]

@TC:

Downloaded as soon as I read this:

Originally Posted by Cammy

NeonLight's Workbench CD allows you to change CDs without the CD32 rebooting

Haven't actually tried it out, but looks VERY handy!

PZ.

[a4k-oerx]

If you examine the sourcecodes of the MegaGames1-CD, you will find a small simple executable C/NoReboot and also the asm-sourcecode NoReboot.S - it disables the reset if you open the CD32. Find more details about that CD here:
http://eab.abime.net/showpost.php?p=612672&postcount=53

For the curious c0d3rz:

	INCDIR	MegaGamesSrc:LVO3.1_opt/
	INCLUDE	exec_lib.i
	INCLUDE	lowlevel_lib.i
	INCLUDE	graphics_lib.i

	INCDIR	MegaGamesSrc:Include3.1/
	INCLUDE	libraries/lowlevel.i	

	SECTION	NoReset,CODE

prg	move.l	$4.w,a6
	lea	lowlevelname(pc),a1
	moveq	#40,d0
	jsr	_LVOOpenLibrary(a6)
	tst.l	d0
	beq.b	lowlevel_error
	move.l	d0,a5

	jsr	_LVOForbid(a6)

	exg	a5,a6
	lea	my_tagList_take(pc),a1
	jsr	_LVOSystemControlA(a6)

	exg	a5,a6

	;move.l	$4.w,a6
	jsr	_LVOPermit(a6)

	;move.l	$4.w,a6
	;move.l	lowlevelbase(pc),a1
	move.l	a5,a1
	jsr	_LVOCloseLibrary(a6)
lowlevel_error

	moveq	#0,d0
	rts

lowlevelname
	dc.b	"lowlevel.library",0
	cnop	0,2

my_tagList_take
	dc.l	SCON_CDReboot,CDReboot_Off
	dc.l	TAG_DONE

[FOL]

Originally Posted by TheCorfiot

Just a bit offtopic.

This is the first I've heard of Neonlight's WB CD and I've downloaded it, absolutely fantastic & so useful.

Excellent Resource.

TC

Same here, never knew about it. Must be using that app, that stops the CD32 Rebooting if drive opened.

[FOL]

Originally Posted by a4k-oerx

If you examine the sourcecodes of the MegaGames1-CD, you will find a small simple executable C/NoReboot and also the asm-sourcecode NoReboot.S - it disables the reset if you open the CD32.

Aye, I knew of it, but didnt see the point in complicating things earlier in the thread, . Its a great little app, I used to use it with my SX1 (before I blew it up).

[gibs]

Originally Posted by gibs

I think that if I burn the 1.5 update on a CD the neonlight workbench will allow me to swap...

That's why I was talking about the Neonlight CD because I knew we could swap with it ;-)

Anyway it's not hard to add the Indivision last update on it, so you save 1 CDR

[gibs]

At this time, Vesalia Support has never replied to me. So next time I will purchase to amigakit.com for sure...