PFS3AIO v3.1 Final - Page 3

klx300r · 21 February 2018, 04:12

Quote:

Originally Posted by supaduper

Just updated my RDB with Toni`s Ver 19 pfs3aio and its all good

Any noobs who want to do this for partitions less then 5gb in size , just extract pfs3aio from Toni`s download then put it into L: directory.
Then fire up HDtoolbox, then >, Partition Drive >select your first partition then> tick Advanced Options, >Update > input L: pfs3aio into dialog box > Click OK ( if successful it will change to Ver19 in the window) > Click OK > Save changes to drive.

Your done..enjoy

thanks

& thanks to Toni for squashing the bugs

Toni Wilen · 21 February 2018, 09:36

Warning: test2 has stupid bug in direct scsi disk write.

I added extra check that also validates that transferred bytes match requested number of bytes.

Unfortunately original write code used pre-max transfer calculated block count buffer size (which is harmless bug. Read was correct so it was most likely missed when max transfer support was added) and I blindly used it as expected number of blocks...

Causes unexpected write error requester with error=0 if larger than max transfer write is attempted. Only affects Direct SCSI mode.

Fix will be released later today.

Jope · 21 February 2018, 13:14

This sounds very much like the GVP bug I seem to remember. I'll finally run some tests against a +4GB SCSI drive today once you have it released.

Toni Wilen · 21 February 2018, 16:51

Test 3 released.

Foul · 21 February 2018, 18:03

Guru when Booting with test 3 :\

Latest FS-UAE dev

Was Working with Original PFS3 / PFS3AIO (From Aminet) and PFS3AIO 3.0 Test #1

Toni Wilen · 21 February 2018, 18:06

"It does not work" -> ignored.

Foul · 21 February 2018, 18:13

how i can help ?

my fs-uae config + logs attached

Kde neon with FS-UAE 2.9.6dev1

Toni Wilen · 21 February 2018, 18:20

Config and log probably is enough.

But never ever mention about program returning error without also mentioning the exact error... It really annoys me! (Just the first guru number, second number is useless. And does it change?)

Foul · 21 February 2018, 18:24

same number each time i launch FS-UAE

i'm sorry, i know you hate that.. and it's not my first reporting bugs

Test #1 was working fine... i just updated to Test #3.. saved.. rebooted.. and guru.. if it can help a little more..

i saved/cloned my system just before, so can re-clone it on my CF card... no prob

Toni Wilen · 21 February 2018, 19:01

Quote:

Originally Posted by Foul

same number each time i launch FS-UAE

i'm sorry, i know you hate that.. and it's not my first reporting bugs

Test #1 was working fine... i just updated to Test #3.. saved.. rebooted.. and guru.. if it can help a little more..

i saved/cloned my system just before, so can re-clone it on my CF card... no prob

Exactly why I replied that way, only new posters or regulars that normally don't do testing get better replies

Unfortunately that log has only fs-uae specific messages, there is no regular uae log messages. Some extra switch needed?

Does test2 work? (Nothing bad happens when booting)

Foul · 21 February 2018, 19:18

not tested Test #2... due to the prob you mentioned

Toni Wilen · 21 February 2018, 19:48

Quote:

Originally Posted by Foul

not tested Test #2... due to the prob you mentioned

Are you really sure you installed it properly to RDB? There is nothing that could cause that kind of error unless something got corrupted.

Also: test #2. You won't notice any problems unless you run try to copy big files and even then it may not happen. And most likely absolutely nothing happens unless you forced direct scsi. (=what dostype?)

Foul · 21 February 2018, 20:37

must wait tomorrow.. my CF card is at work... will do more test..and report if i find something new.

Thx for all

More test by others user would be cool as well

supaduper · 21 February 2018, 21:38

Toni I tested test#3 on real amiga and its all good and on your Winuae with no problems

So though I have never used FS-uae I installed it to see if I get the same error as Foul and I do, but the weird thing is even some older version PFSaio hard files crash, so in conclusion as a guess must be a problem with FS-uae.

Toni Wilen · 21 February 2018, 21:43

Quote:

Originally Posted by kgc210

Do you still have to select DOS type ie:
PFS\03 = 0x50465303 or PDS\03 = 0x50445303

Or is it fully automatic now?

PDS is still needed if driver is too broken to handle TD64/NSD tests. You'll know if it crashes at boot

Quote:

Originally Posted by kolla

When using FFS, one nice feature is that one can run "version" against the device...

Code:

version full df0:
filesystem 45.16 (11.Apr.2010)

Would be cool if this was more commonly implemented

I forgot, will be in next update. (Also UAE directory filesystem needs this, odd that no one has ever mentioned it?)

Quote:

Originally Posted by supaduper

Toni I tested test#3 on real amiga and its all good and on your Winuae with no problems

So though I have never used FS-uae I installed it to see if I get the same error as Foul and I do, but the weird thing is even some older version PFSaio hard files crash, so in conclusion as a guess must be a problem with FS-uae.

Can you get full uae log out of fs-uae? (not just fs-uae-only messages) It should help to see what is going on.

supaduper · 21 February 2018, 21:50

[QUOTE=Toni Wilen.

Can you get full uae log out of fs-uae? (not just fs-uae-only messages) It should help to see what is going on.[/QUOTE]

Where do I get the logs ? lol
And I am off out now will be in the morning Toni

Toni Wilen · 21 February 2018, 21:52

Quote:

Originally Posted by supaduper

Where do I get the logs ? lol

I don't know. It is not my problem

Retro-Nerd · 21 February 2018, 21:53

FS-UAE\Cache\Logs

supaduper · 21 February 2018, 21:53

Quote:

Originally Posted by Toni Wilen

I don't know. It is not my problem

Same here I only use Winuae

malko · 21 February 2018, 22:21

Quote:

Originally Posted by supaduper

So though I have never used FS-uae I installed it to see if I get the same error as Foul and I do, but the weird thing is even some older version PFSaio hard files crash, so in conclusion as a guess must be a problem with FS-uae.

Quote:

Originally Posted by supaduper

Where do I get the logs ? lol
And I am off out now will be in the morning Toni

Did not read the full thread (so did not see what has to be tested), but did you set the log options in the config file ?

log_autoscale = 1
log_bsdsocket = 1
log_flush = 1
log_input = 1

If you did not set the " logs_dir = ", see the FS-UAE Log
There is also an " uaelog " option, but as the link goest to nowhere...

Edit: Ok, seen post #45 and following. Will give a try and let you know. Just need the time to download latest test versions and backup my hdf file.

21 February 2018, 18:24	#49
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	same number each time i launch FS-UAE i'm sorry, i know you hate that.. and it's not my first reporting bugs Test #1 was working fine... i just updated to Test #3.. saved.. rebooted.. and guru.. if it can help a little more.. i saved/cloned my system just before, so can re-clone it on my CF card... no prob Last edited by Foul; 21 February 2018 at 18:48.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PFS3aio vs SFS/02	White	support.WinUAE	10	13 April 2018 21:44
PFS3AIO Probs ?	Foul	support.FS-UAE	0	21 February 2018 22:49
PFS3AIO Questions	manic23	support.Hardware	26	22 April 2014 13:49
Pfs3aio ????	stingray76	support.Hardware	2	19 February 2014 09:15
FinalWriter 97; FinalCalc 1.04; Final Data 2.00 & Final Copy	aebrown-u	request.Apps	20	12 July 2009 11:19

21 February 2018, 09:36	#42
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Warning: test2 has stupid bug in direct scsi disk write. I added extra check that also validates that transferred bytes match requested number of bytes. Unfortunately original write code used pre-max transfer calculated block count buffer size (which is harmless bug. Read was correct so it was most likely missed when max transfer support was added) and I blindly used it as expected number of blocks... Causes unexpected write error requester with error=0 if larger than max transfer write is attempted. Only affects Direct SCSI mode. Fix will be released later today.

21 February 2018, 13:14	#43
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,861	This sounds very much like the GVP bug I seem to remember. I'll finally run some tests against a +4GB SCSI drive today once you have it released.

21 February 2018, 16:51	#44
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Test 3 released.

21 February 2018, 18:03	#45
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	Guru when Booting with test 3 :\ Latest FS-UAE dev Was Working with Original PFS3 / PFS3AIO (From Aminet) and PFS3AIO 3.0 Test #1

21 February 2018, 18:06	#46
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	"It does not work" -> ignored.

21 February 2018, 18:20	#48
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Config and log probably is enough. But never ever mention about program returning error without also mentioning the exact error... It really annoys me! (Just the first guru number, second number is useless. And does it change?)

21 February 2018, 19:18	#51
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	not tested Test #2... due to the prob you mentioned

21 February 2018, 20:37	#53
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	must wait tomorrow.. my CF card is at work... will do more test..and report if i find something new. Thx for all More test by others user would be cool as well

21 February 2018, 21:38	#54
supaduper Registered User Join Date: Oct 2012 Location: Krypton Posts: 1,210	Toni I tested test#3 on real amiga and its all good and on your Winuae with no problems So though I have never used FS-uae I installed it to see if I get the same error as Foul and I do, but the weird thing is even some older version PFSaio hard files crash, so in conclusion as a guess must be a problem with FS-uae.

21 February 2018, 21:50	#56
supaduper Registered User Join Date: Oct 2012 Location: Krypton Posts: 1,210	[QUOTE=Toni Wilen. Can you get full uae log out of fs-uae? (not just fs-uae-only messages) It should help to see what is going on.[/QUOTE] Where do I get the logs ? lol And I am off out now will be in the morning Toni

21 February 2018, 21:53	#58
Retro-Nerd Missile Command Champion Join Date: Aug 2005 Location: Germany Age: 52 Posts: 12,435	FS-UAE\Cache\Logs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)