|
19 November 2016, 00:04
|
#1 |
|
Registered User
Join Date: May 2016
Location: Mandeville USA
Posts: 203
|
A3000 case fronts
My DF0: floppy has bitten the dust after I cleaned out all the dust bunnies, it seems, so I am going to replace it with one of the flash memory solutions, such as a Gotek or HxC drive. I *REALLY* don't want to hack up the front plate of the case of the A3000 to fit it in there so that it's flush with the front of the case. Does anyone know if there are sellers of 3D printed case fronts for the 3000? I know, it's a stretch, but, thought I'd ask anyway.
|
|
|
19 November 2016, 00:19
|
#2 |
|
Registered User
Join Date: Sep 2007
Location: Stockholm
Posts: 4,332
|
You don't need to hack up anything. You can either use longer cables to put the Gotek or HxC outside your Amiga – or you use an USB extension cable and solder on buttons on a cable.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Swap A3000 case bits for a nice A1200 or cash | aysel | MarketPlace | 0 | 18 July 2014 20:26 |
| WTB: A3000 top case | Jope | MarketPlace | 0 | 15 January 2013 11:01 |
| Wanted: A3000 case faceplate | Brosol | MarketPlace | 2 | 26 July 2010 21:32 |
| FS: FULLY LOADED A3000, a bare bone A3000 and lots of Amiga Stuff! | emc_errol | MarketPlace | 0 | 30 January 2009 22:33 |
| Wanted! CD32 Case and A1200 Case! | ElectroBlaster | MarketPlace | 0 | 08 December 2002 18:28 |
|
|
