Amiga to PC Monitor - Page 3

whiteb · 06 June 2006, 09:03

Quote:

Originally Posted by fannypad

I've just bought an A1200, my first Amiga, for the sole purpose of using Octamed to sequence an Akai sampler via MIDI.

Many thanks in advance

Ahhh posted here too i see, well I hope you stay here too

Give me a few seconds, and I'll attach the productivity driver here for you. Gotta get it from the 4000.
It gets extracted to "Devs:Monitors", which is the same directory as "Dh0:devs/monitors".

One tip, Multiscan.lha, is ACTUALLY Multiscan.lzx.. I got to suggest that eab adds LZX to the recommended file types list. Suggest renaming .lha to .lzx before extracting.

06 June 2006, 09:18

Many thanks for the driver, much appreciated

Will let you know how I get on once I've got the 1200 up and running.

BiL0 · 06 June 2006, 10:15

@fannypad
You can use the VGAOnly monitor which will output the 31khz, but it will only work for your workbench.
If you have octamed 6 then if I remember correctly you could use the same resolution that the OS was using, if you 're using 5 or previus version then no it wont work as octamed will choose its own resolution and I found no other way to force that (even using software that will force the resolution of a software will not work).

hope this helps you
BiL0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which monitor for Amiga ?	THX1138	support.Hardware	9	09 May 2008 12:28
What monitor for the Amiga?	Lordie	support.Hardware	12	24 February 2008 13:09
Amiga To Monitor	LazerBall	support.Hardware	2	19 February 2007 18:14
Schematic diagram of an Amiga 1942 or Amiga 1940 monitor	Vaclav	support.Hardware	0	18 May 2006 05:18
Best monitor for Amiga	Pyromania	Amiga scene	2	11 April 2002 13:04

06 June 2006, 09:18	#42
fannypad Posts: n/a	Many thanks for the driver, much appreciated Will let you know how I get on once I've got the 1200 up and running.

06 June 2006, 10:15	#43
BiL0 Zone Friend Join Date: Apr 2006 Location: London / UK Posts: 73	@fannypad You can use the VGAOnly monitor which will output the 31khz, but it will only work for your workbench. If you have octamed 6 then if I remember correctly you could use the same resolution that the OS was using, if you 're using 5 or previus version then no it wont work as octamed will choose its own resolution and I found no other way to force that (even using software that will force the resolution of a software will not work). hope this helps you BiL0

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)