Internal DVI adapter board for new Indivision

kipper2k · 13 July 2011, 23:55

Hi All,

I've been doing some checking and an internal DVI adapter board for the upcoming MKII video board can go where the RF module sat on the A1200... however, the width of the DVI header is 1.450" so the only way to put it there would be to remove the composite video jack too. The capacitor that sits behind the Composite video jack will not get in the way.

A board can be made similar to my VGA adapter board for Indi ECS and AGA MKI video so that it is an easy install. Granted, there is some desoldering do be done to prep the board. The board can also be placed on the other end at the rear of the board and use a couple of small nuts and bolts to secure it in place (My preference as there is no soldering/desoldering at all). I could design a board so you could place it in either location.

what"s peoples thoughts?

NovaCoder · 17 July 2011, 07:01

Hiya,

I've already removed my nasty RF module and I assumed that the DVI output would fit in there nicely without having to also remove the composite output

SleepyMan · 17 July 2011, 09:31

It would be a welcome addition to my A1200 :-)

13 July 2011, 23:55	#1
kipper2k Registered User Join Date: Sep 2006 Location: Thunder Bay, Canada Posts: 4,323	Internal DVI adapter board for new Indivision Hi All, I've been doing some checking and an internal DVI adapter board for the upcoming MKII video board can go where the RF module sat on the A1200... however, the width of the DVI header is 1.450" so the only way to put it there would be to remove the composite video jack too. The capacitor that sits behind the Composite video jack will not get in the way. A board can be made similar to my VGA adapter board for Indi ECS and AGA MKI video so that it is an easy install. Granted, there is some desoldering do be done to prep the board. The board can also be placed on the other end at the rear of the board and use a couple of small nuts and bolts to secure it in place (My preference as there is no soldering/desoldering at all). I could design a board so you could place it in either location. what"s peoples thoughts?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DVI/HDMI monitor that works well with Indivision AGA MK2	xraynorm	support.Hardware	0	25 July 2013 21:12
Idea for internal PS2 mouse adapter -All Amiga models	kipper2k	Hardware mods	106	11 June 2013 10:20
dvi-i adapter to indivision aga mk2	heALer	support.Hardware	10	30 October 2012 19:49
Indivision ECS Amiga 1000 Socket Adapter	amigakit.com	MarketPlace	2	30 January 2010 15:21
A600/A1200 internal IDE->CF adapter	alexh	support.Hardware	17	05 April 2008 00:35

17 July 2011, 07:01	#2
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	Hiya, I've already removed my nasty RF module and I assumed that the DVI output would fit in there nicely without having to also remove the composite output

17 July 2011, 09:31	#3
SleepyMan Registered User Join Date: Jan 2009 Location: Harderwijk/Netherlands Posts: 25	It would be a welcome addition to my A1200 :-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)