Santa's come early... A new scandoubler from Individual Computers - Page 7

T_hairy_bootson · 08 September 2008, 03:36

Quote:

Originally Posted by amigakit.com

We over-estimated the delay- I have just been talking to Jens on the telephone.

All of our Indivision AGA 1200 units have passed QA, they are packed and will be shipped imminently to us.

Don't miss out - order now:

http://amigakit.leamancomputing.com/...roducts_id=821

Good news, might make it in time for the next user group meeting.

TheCorfiot · 08 September 2008, 10:25

Excellent News Matthew

Pls let me know when they have arrived, Can't wait

Best Wishes

TC

Charlie · 08 September 2008, 12:41

Apologies: A little OT, this question.

Got S-Video on my A1200, but the old HighGFX output's a bit hit 'n miss to say the least - not sure if it's limitations of my miggy and the S-Video output or the S-Video -> VGA converter I'm using...

I'm interested in one of these thingamies but having compared the photos it's not physically compatible with my PowerFlyer (AKA Elbox Fast ATA)...
...as it happens the PowerFlyer is getting up my nose anyway, so:

-What other 'fast-ide' (not just splitters) are physically compatible with the Indivision?
-If there are none, It's not a killer - got SCSI anyway but that'll get me into buying further hardware I don't currently posess.

Thanks

NovaCoder · 08 September 2008, 12:48

Quote:

Originally Posted by Charlie

Apologies: A little OT, this question.

I'm interested in one of these thingamies but having compared the photos it's not physically compatible with my PowerFlyer (AKA Elbox Fast ATA)...
...as it happens the PowerFlyer is getting up my nose anyway, so:

-What other 'fast-ide' (not just splitters) are physically compatible with the Indivision?
-If there are none, It's not a killer - got SCSI anyway but that'll get me into buying further hardware I don't currently posess.

Thanks

It's meant to work ok with a Fast ATA (ROM riser?), not so happy if you add a Mediator to the mix though....

Also there's always the IDEFix Express

NovaCoder · 09 September 2008, 02:06

I hope whoever gets one of these to play with first, posts a review here for us all to read

Some of us will have to wait a bit longer for their pressies to arrive down here

viddi · 11 September 2008, 15:11

The Indivision arrived today!!!

Here are some pics:
Sorry for the bad quality. I made them with my DV cam.

StevenJGore · 11 September 2008, 15:14

Cool! Hopefully mine will arrive soon. Anybody in the UK got theirs yet?

TheCorfiot · 11 September 2008, 15:18

Cmon AmigaKit.......

Where are they????

TC

DDNI · 11 September 2008, 15:24

Whoa! Uber jealous now!!

viddi · 11 September 2008, 15:46

Quote:

Originally Posted by DDNI

Whoa! Uber jealous now!!

I´m sorry.

Okay, installation was easy and it fits perfectly.

BUT:
The enclosed VGA cable is too short. It isn´t possible to reach the slot next to the mouse port.

And CF adapters without a 2,5" cable can´t be used anymore.
(http://cgi.ebay.de/Mini-CF-an-2-5-ID...d=p3286.c0.m14)

So, I have to buy this one:
http://cgi.ebay.de/Compact-Flash-CF-...d=p3286.c0.m14

That´s annoying.

DDNI · 11 September 2008, 15:50

Quote:

Originally Posted by viddi

I´m sorry.

Okay, installation was easy and it fits perfectly.

BUT:
The enclosed VGA cable is too short. It isn´t possible to reach the slot next to the mouse port.

That´s annoying.

Where have you positioned the VGA out then?

@ AmigaKit is this something you can resolve before you ship your orders?

viddi · 11 September 2008, 15:54

Quote:

Originally Posted by DDNI

Where have you positioned the VGA out then?

Nowhere!
The case is still open and I´ll buy a new cf adapter and a longer VGA cable...

DDNI · 11 September 2008, 15:57

Quote:

Originally Posted by viddi

Nowhere!
The case is still open and I´ll buy a new cf adapter and a longer VGA cable...

Bummer!!

Did indivision expect everyone to install this thing in a towered A1200???

viddi · 11 September 2008, 16:05

Quote:

Originally Posted by DDNI

Bummer!!

Did indivision expect everyone to install this thing in a towered A1200???

I really don´t know why they included such a short cable.

I can forgive the CF issue but not this damn short cable. Grrrrr.

DDNI · 11 September 2008, 16:05

It really is a stupid oversight!

Perhaps a longer cable led to interference/degradation??

Anemos · 11 September 2008, 16:09

@Viddi can you send us some display photos of your monitor?

TheCorfiot · 11 September 2008, 16:14

I can't believe the cable is too short, that is a serious oversight, considering it's for an "A1200" not a "towered A1200"

In anycase I'm happy to receive a replacement cable in the post when they are produced, for the time being though I would prefer use of the Indivision & letting the plug spill out from the back.

TC

viddi · 11 September 2008, 16:20

Quote:

Originally Posted by Anemos

@Viddi can you send us some display photos of your monitor?

I´ll post them later when I get my girlfriend´s digicam.
But the quality is outstanding.

Quote:

Originally Posted by TheCorfiot

I can't believe the cable is too short, that is a serious oversight, considering it's for an "A1200" not a "towered A1200"
the back.

Just a moment. I´ll remove the disk drive.
It can be that it fits very precise.

keropi · 11 September 2008, 16:22

yes, how strange... short cable...? maybe viddi got this by mistake?

TheCorfiot · 11 September 2008, 16:24

@viddi,

actually my friend, looking at your picture the cable is folded & appears to be longer than a length of A4 Paper, There must be enough length there, especially if fed underneath the floppy drive & straight to the rear port

I bet you it fits

I bet the picture quality is stunning...............Jealous...

TC

PS Keropi san keep watching.... it's going to fit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New products for C64 and Amiga from Individual Computers	Schoenfeld	News	1644	01 April 2017 23:25
Details for the next generation of Flickerfixers from Individual Computers	MarkONE	News	2438	01 February 2016 12:04
Santa's come early... ;-) Amiga meets Piano Vol.2 released!	viddi	Amiga scene	26	26 June 2011 14:44
Individual computers to quit selling hardware.	whiteb	News	7	20 December 2010 21:46
New products by individual Computers	Paul	News	0	30 November 2004 15:58

08 September 2008, 10:25	#122
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	Excellent News Matthew Pls let me know when they have arrived, Can't wait Best Wishes TC

08 September 2008, 12:41	#123
Charlie . . Mouse . . Join Date: Jun 2005 Location: Nowhere Age: 55 Posts: 1,792	Apologies: A little OT, this question. Got S-Video on my A1200, but the old HighGFX output's a bit hit 'n miss to say the least - not sure if it's limitations of my miggy and the S-Video output or the S-Video -> VGA converter I'm using... I'm interested in one of these thingamies but having compared the photos it's not physically compatible with my PowerFlyer (AKA Elbox Fast ATA)... ...as it happens the PowerFlyer is getting up my nose anyway, so: -What other 'fast-ide' (not just splitters) are physically compatible with the Indivision? -If there are none, It's not a killer - got SCSI anyway but that'll get me into buying further hardware I don't currently posess. Thanks

09 September 2008, 02:06	#125
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	I hope whoever gets one of these to play with first, posts a review here for us all to read Some of us will have to wait a bit longer for their pressies to arrive down here

11 September 2008, 15:11	#126
viddi Moderator Join Date: Apr 2006 Location: Germany Age: 44 Posts: 4,007	The Indivision arrived today!!! Here are some pics: Sorry for the bad quality. I made them with my DV cam.

11 September 2008, 15:14	#127
StevenJGore Amiga Fanatic Join Date: Feb 2004 Location: North Yorkshire, UK Age: 46 Posts: 726	Cool! Hopefully mine will arrive soon. Anybody in the UK got theirs yet?

11 September 2008, 15:18	#128
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	Cmon AmigaKit....... Where are they???? TC

11 September 2008, 15:24	#129
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,431	Whoa! Uber jealous now!!

11 September 2008, 16:05	#135
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,431	It really is a stupid oversight! Perhaps a longer cable led to interference/degradation??

11 September 2008, 16:09	#136
Anemos 70X7 Join Date: Apr 2008 Location: Ἑλλάς Posts: 1,078	@Viddi can you send us some display photos of your monitor?

11 September 2008, 16:14	#137
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	I can't believe the cable is too short, that is a serious oversight, considering it's for an "A1200" not a "towered A1200" In anycase I'm happy to receive a replacement cable in the post when they are produced, for the time being though I would prefer use of the Indivision & letting the plug spill out from the back. TC

11 September 2008, 16:22	#139
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	yes, how strange... short cable...? maybe viddi got this by mistake?

11 September 2008, 16:24	#140
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	@viddi, actually my friend, looking at your picture the cable is folded & appears to be longer than a length of A4 Paper, There must be enough length there, especially if fed underneath the floppy drive & straight to the rear port I bet you it fits I bet the picture quality is stunning...............Jealous... TC PS Keropi san keep watching.... it's going to fit.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)