Hdtoolbox for cd32

[512k]

Just get a tf330 and have been following crg info on large partitions scsi is already patched vie loadmodule

And i having nothing but issues with hdtoolbox

HDD Info First

32gb cf card with the following

Cylinders - 62043

Heads 16

Tracks 63

Following crg calculator part i get 29.82gb

3 partitions

DH0 - Aka workbench

DH1 - WHDLoad

DH2 - Files

I can basically do the the 3 partitions in the video no problem but when i go to save the changes hdtoolbox tell me it will do something to dh1 reboot And none of my partition show up after reboot And if i go back in to hdtoolbox only 1 partition.

Link to crg youtube video

[ Show youtube player ]

[Daedalus]

First things first - I take it you're using an old version of HDToolbox, from 3.1 perhaps? Make sure you're pressing enter after you modify any values. Due to a limitation of how GadTools works, HDToolbox doesn't know you've changed values if you just enter them and click elsewhere.

[512k]

Originally Posted by Daedalus

First things first - I take it you're using an old version of HDToolbox, from 3.1 perhaps? Make sure you're pressing enter after you modify any values. Due to a limitation of how GadTools works, HDToolbox doesn't know you've changed values if you just enter them and click elsewhere.

Yes 3.1 try your method same issue

[Daedalus]

Is the scsi.device update definitely in place before you run HDToolbox? You can run

Version scsi.device

in the shell to check.

[512k]

Scsi.device 43.45

[512k]

Woot enable full drive rdb mode got them to show now if i could figrure out why dopus is crashing on a hdf 80000b

[Daedalus]

Hmmm, yep, not sure where that setting is but it sounds like would need to be enabled alright.

As for the crashing, not sure but it looks like it could be a CPU library / FPU issue. Are you using an FPU version of any software? If you copy the same file using Workbench, does it work fine?

[512k]

Dopus requires fpu?

[Daedalus]

It shouldn't, but maybe there's an FPU build or something.

[thomas]

For floating point-related gurus on 3.1 without an FPU there is a fix:
http://aminet.net/package/util/boot/SetPatch_43.6b

In most cases an FPU is not required, it's just the math libs malfunctioning. The new SetPatch fixes this.

[512k]

Originally Posted by thomas

For floating point-related gurus on 3.1 without an FPU there is a fix:
http://aminet.net/package/util/boot/SetPatch_43.6b

In most cases an FPU is not required, it's just the math libs malfunctioning. The new SetPatch fixes this.

That fixed the dopus issue thank you

@ Daedalus

Thanx for the support also

[Daedalus]

Glad you're sorted!

[Glen M]

Just noticed this thread. Thanks for watching my video and glad your sorted.

I just want to clarify if you copied the files from the dropbox link as I did in the video?

I'll maybe add a sticky in the comments to tell people the must copy all the files across to ensure this works.

edit: where is the setting for full drive RGB mode as you mentioned above?

[512k]

Originally Posted by Glen M

Just noticed this thread. Thanks for watching my video and glad your sorted.

I just want to clarify if you copied the files from the dropbox link as I did in the video?

I'll maybe add a sticky in the comments to tell people the must copy all the files across to ensure this works.

edit: where is the setting for full drive RGB mode as you mentioned above?

Check the hardfile - hardrive side of winuae

https://www.vware.at/winuaehelp/CDHardDrives.html

I also believe it was under add hard drive box also thanx for bringing my spelling mistake to my attention meant RDB