Second Samurai Button ????

[bllpla]

Hi at all and sorry for my bad english
tonight i have try the second samurai gamens and they works fine, but i can't change wepon when i have for example the knife and the book i can't change this, i have try all keyboard buttons but don't respond
any idea ?

thanks in advance

[lilalurl]

The keys are normally left shift for player 1 and right shift for player 2.

Are you by any chance using Winuae and Keyboard layout B? Or have you remapped those keys in the input panel?

[bllpla]

nothing
i have try it and they don't respond, but in any case when a try to change any settings they works but when i restart don't work again, now i have new quest,
second samurai works fine in a 1200 aga machines ?

anyone can post config for second samurai ?

thanks in advance

[TCD]

Hi bllpla,

use the A500 most common quickstart and disable the mouse (set 'Port 0' to <none>). The left shift button worked for me with these settings to cycle through the weapons.

[bllpla]

thanks for reply
but i mi quest is this i have second samurai aga version they works but the key don't respond, is possible ???

[TCD]

For the AGA version just use the A1200 non-expanded quickstart. Also works with the shift key here. Do you use a keyboard layout for the controls?

[lilalurl]

Originally Posted by TheCyberDruid

Do you use a keyboard layout for the controls?

In the same vein, have you tried to see if the Shift keys work:
- in another game that uses them (for example Pinball Fantasies and other pinball games)?
- under Workbench environment? Open a CLI window or rename a drawer or whatever and see if they do modify the case of the typed letters.

[bllpla]

yes in pinball they works fine

[TCD]

Most important question is still if you use the keyboard to play the game

[bllpla]

no i use joypad and i assign special button at joypad
for example in turrican i assign space bar at joypad button 2 and they works fine

[Retro-Nerd]

Originally Posted by bllpla

for example in turrican i assign space bar at joypad button 2 and they works fine

But this is a bad example. Turrican already supports a second joy button for the energy line.

[bllpla]

and the smart bomb ???

[Retro-Nerd]

The grenade? No, should be the ALT or Amiga key iirc.

[TCD]

So you use the A1200 quickstart, a joypad and you can't switch weapons with the left shift key? Since you remap keys for your joypad already, double check if you have left shift mapped to left shift

[bllpla]

ok news
i have try whit non aga floppy version and they works now
i my version is whdload aga and don't work, i have try non aga whdload and don't work any solution ? thanks again

[TCD]

So we're talking about the WHDLoad version then? Will have a look later

Edit : Also in the WHDLoad AGA version the left shift button works. Must be something in your setup (either WinUAE or the WB you use).

[bllpla]

now i explain my project, i have an arcade cabinet and i have emulator
mame, snes, genesis, AMIGA ecc.

i have preconfigured 50 amiga games in this mode

a one config for games for example turrican

i have installed WB i have installed turrican i have modified the startup sequence for load directli turrican not WB in this mode when i launch the winuae config at startup load automaticali turrican ok

c/WHDLoad Turrican.slave Preload NoVBRMove

they works perfectly

now is the time of second samurai

c/WHDLoad SecondSamurai.slave Preload NoVBRMove

they works but left shift don't works

[bllpla]

problem resolved

[andreas]

OK, so what was it then?

BTW the things TCD mentioned also need to be done on REAL THING! Believe it or not, but yes I always had to physically disconnect my mouse on my A500/1000 because it always interfered with moves and even menu control!

[TCD]

Originally Posted by andreas

BTW the things TCD mentioned also need to be done on REAL THING! Believe it or not, but yes I always had to physically disconnect my mouse on my A500/1000 because it always interfered with moves and even menu control!

You don't know how many WinUAE settings I tried before I found out that it was just the mouse in port 0
Oh and I also would like to know how you fixed it bllpla. Might be very interesting for others that try the same