"Flower Power" by Anarchy partially broken with CE on

[Maren]

Unfortunately I've run out of space so I had to upload the savestate somewhere else: http://www.fileshost.com/download.php?id=620B27871

I'm basically getting a black screen for certain scenes when CE is on but music will still play. Said behavior is also present in the latest beta and the CRC32 for the ADF used to record the savestate is 1f9c400e, though no other version of the disk appears to work any better.

This demo requires 1mb of RAM.

Regards.

[Toni Wilen]

Originally Posted by Maren

Unfortunately I've run out of space so I had to upload the savestate somewhere else: http://www.fileshost.com/download.php?id=620B27871

I'm basically getting a black screen for certain scenes when CE is on but music will still play. Said behavior is also present in the latest beta and the CRC32 for the ADF used to record the savestate is 1f9c400e, though no other version of the disk appears to work any better.

This demo requires 1mb of RAM.

Regards.

No need to attach logs as long as there are nothing interesting (=do not bother if it looks same as log from wb disk boot) winuaebootlog.txt is only needed once / winuae version

More important question is: did it work with 2.0 or 1.6.1?

EDIT: I think this is similar to Batman Vuelve, some earlier part takes 1 or more frames too long and next part's start frame counter is missed.

[NewDeli]

Hi again,


I am using WinUAE v2 and I noticed two glitches with this demo, during the first 3D sequence. One is right after the "module" leaves the "parking lot", and one a few seconds after that, at an embranchment. It's hard to describe, basically the surfaces "explode" briefly.

No black screen except while the demo was decrunching.
I've taken the demo from here (where else could it be from ?).


EDIT : Just tested with v2.0.1, same phenomenon, except glitches happen later in the 3D sequence