12 September 2012, 16:33 | #1 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Amiga A 3000
Collector's Item
I amiga 3000 for sale been on a shelf in my store room for many years in good clean condition. Bought new. Serial Number 002473 I have just got it out and will be testing it in the next few days. This worked perfectly when put away. Equipped with following boards: AMI Rev 1.1A Ethernet for amiga computers by Hydra Systems Picasso II by Village Tronic Serial 950501212 Oktagon board for mounting second hard disk 34050-00A serial 504772 Commodore daugher Board Rev 5 External Ports Serial, Floppy, SCSI, Parrallel, Video 15 & 31 khz Audio Internal Hard Drive Questions and offers I will add some photos more details as soon as I get a chance - probably in next 24 hours David Enquire email me User name david @ my server vizion2000.net I will report results of tyesting but pretty damn sure everything should work fine. Last edited by vizion; 13 September 2012 at 11:16. Reason: Correction 5000 should read 3000 |
12 September 2012, 21:41 | #2 |
Registered User
Join Date: Feb 2009
Location: UK
Posts: 257
|
Can you check how much memory is on-board, the motherboard revision, and the battery if still present for leakage ?
|
12 September 2012, 22:50 | #3 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
|
12 September 2012, 23:41 | #4 |
Monochrome and 8 bit
Join Date: Nov 2004
Location: Underbarrow, Gods Country
Age: 57
Posts: 600
|
Hmmm... ok, I'm interested :-)
Regret selling my A4000s |
13 September 2012, 10:53 | #5 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Found some more stuff
On another shelf in the store room found:
Amiga keyboard Model KKQ-E94YC Commodore Part 312716-01 Serial No MT 9111 Amiga Mouse A00 514724 2 External Floppy Disk Drives - #1 is Cumana CAX 354 Serial # 25717 #2 No External identification - I will open it when I take the machine to my workshop A load of Amiga Software on around 130 Floppies - I will catalogue these when I get a chance there is a large proportion of advanced software development tools Full Amiga Workbench Manual Part Number 363313-01 On the "Spares Shelf" 1 Box labelled A1200 Upgrade with two chips labelled Hong Kong HH232G38 MP150SG Willing to break this up or sell complete |
13 September 2012, 14:10 | #6 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
OK The A3000 battery has a hint of leak but nothing has reached the mbo so I am going to have a new battery fitted right away. I have ordered a replacement from:
http://amigakit.leamancomputing.com/...roducts_id=475 and will have it fitted by an experienced engineer. Prior to testing I have asked a question on the support forum: http://eab.abime.net/showthread.php?p=839313#post839313 about using an lcd monitor for testing especially bearing in mind there is a Picasso Ii included. I believe it may be necessary to remove a resistor and am not certain which of my LCd monitors (if any) would be the best choice for testing. All comments welcome - if you have any advice on the testing please post to the support forum link- just use this marketplace forum thread to ask for info or express interest. Thanks David PS Just heard the new battery is being shipped today so hopefully I will get it monday. As soon as it has been fitted I will test the system out and be ready to haggle <chuckles> with those who are interested Last edited by vizion; 13 September 2012 at 16:44. Reason: Battery on way |
13 September 2012, 16:20 | #7 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Photos
Hi
Photos of actual components in the system! Photographed by me this afternoon. If anyone wants any more piccies just say. Last edited by vizion; 13 September 2012 at 16:45. Reason: You can ask for more piccies |
13 September 2012, 16:58 | #8 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,646
|
Can you state PRICES for this stuff? Thanks.
|
13 September 2012, 17:55 | #9 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Do not yet have a feel for value so tell me what you are interested in - I am looking for offers. Its all a bit tentative until everything has been tested - hopefully by this time next week that should be clearer.
I also do not know whether it would be more helpful to break the "stuff" down into components for separate sale or as one bundle. So please let me know what you are interested in. When I have a few offers or indications in I will post them up here and make some decision about where to go from there. My only other alternative is to sell everything on ebay - but I would prefer to deal with known enthusiasts here. If you want to talk privately then Email me user name david # my server vizion2000.net |
14 September 2012, 02:09 | #10 |
Registered User
Join Date: Jun 2012
Location: Portugal
Posts: 105
|
interested second
|
14 September 2012, 18:53 | #11 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
I am moving towards breaking the system down into component parts for sale after I have tested everything.
David |
14 September 2012, 19:18 | #12 |
Registered User
Join Date: Sep 2008
Location: Somewhere
Posts: 223
|
Show closer pictures of the case and the front bezel.
Do they have scratches, dents, ...? |
15 September 2012, 14:29 | #13 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
will do
david |
16 September 2012, 04:39 | #14 |
Registered User
Join Date: May 2006
Location: Kilmacolm
Age: 46
Posts: 632
|
Hi David, from the photo the battery leak looks a bit nasty, is it my imagination or are the components to the right of the battery in the last pic all green with corrosion, one resistor looks to have cracked open too.
There appears to be a kinda dark stain on the pcb which has spread under the DIP and PLCC sockets above right of the battery also. You should get this area of the board cleaned up when you replace the battery. Have a close look for corroded pins and traces. |
16 September 2012, 13:56 | #15 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
OK I will get the engineer to check it out on monday when I take the board to him with the amigakit battery replacement kit. Thanks for the warning.
David |
17 September 2012, 16:08 | #16 |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Just seen engineer.He has made a prelimibnary check and says all the components seem to be OK - no damage. He will fit the new battery kit, clean up as you suggest and then give compoenets and circuit a final check. Should be back with me tomorrow.
|
18 September 2012, 09:02 | #17 |
Registered User
Join Date: Sep 2009
Location: Norway
Posts: 1,711
|
There's quite a bit of acid leak going on indeed, and with the A3000 which is a multilayer board, it's not easy to tell if any vias are destroyed or not.
You should fully test the system (audio, video, hard disk&floppy read/write, mouse ports etc) before going any further with your sale. And one more thing: The battery acid will keep crawling further, even with the battery removed, if you don't treat it with lemon juice (or something, it's said to stop the acid from developing) which will stop the development. |
18 September 2012, 15:05 | #18 | ||
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Quote:
Quote:
david |
||
19 September 2012, 10:18 | #19 | |
Registered User
Join Date: Sep 2012
Location: Bristol
Posts: 20
|
Quote:
Surely lemon juice contains citric acid? Is the leak acid or alkali? If acid it needs to be neuralized ! David |
|
19 September 2012, 11:21 | #20 |
Registered User
Join Date: Mar 2004
Location: finland
Posts: 1,839
|
Alkaline (Potassium hydroxide mostly).
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need help for my Amiga 3000 | amiman99 | support.Hardware | 18 | 05 September 2010 05:26 |
Amiga 3000 UX | Frog | MarketPlace | 1 | 26 July 2010 21:01 |
Amiga 3000 | amicrawler | support.Other | 2 | 15 September 2009 23:06 |
Amiga 3000 problems | sovietconscript | support.Hardware | 35 | 27 May 2009 21:48 |
Hi Oz I am after a Amiga 3000 | Vars191 | MarketPlace | 8 | 11 September 2008 11:41 |
|
|