17 February 2015, 20:47 | #241 |
Registered User
Join Date: Sep 2014
Location: Germany
Posts: 14
|
Hi, I have two issues!
I have trouble getting GFX and network card to work. I run 4.0 since my 4.1 License/CD is for SAM boards and thus not usable with WinUAE (I think... anybody knows better?) So, for 4.0, I have set Picasso IV Z3 as gfx card and A2065 Ethernet card. Both do not work... I have selected the options everyone uses (Again.. I think ) . Picasso96 says that there´s no device and after installing ethernet.device the LAN card is also not working... my config is attached.. if someone can help me. The other issue is my 4.1 cd.. IMHO when 4.1 classic boots, first thing it does is "disable" the 68k and turn on PPC. The Nextgen hardware like Pegasos and SAM boards do not have a 68k CPU and therefore they boot the OS as pure PPC code. Is this why my 4.1cd is not usable? Should I try to ask Hyperion if I could get the files needed for classic or should I buy a new cd? Is there a other way to run my PPC-only-4.1cd? For the gfx and network troubleshooting, here´s my config! Last edited by Nightshader; 17 February 2015 at 23:09. |
18 February 2015, 00:23 | #242 |
Registered User
Join Date: Nov 2014
Location: FT Lewis, WA
Posts: 374
|
Configs didn't make it, you should upload those again. As far as the 4.1CD - it is a PPC OS so that's why it disables 68k, although you should be using WB31 to configure your disks and then use the supplied floppy to boot your system for the first time install.
Regards! |
18 February 2015, 09:16 | #243 |
Registered User
Join Date: Sep 2014
Location: Germany
Posts: 14
|
Sorry, I´m new to this board ... another try for the config :-)
Renamed it to .txt didn´t know that the board has an option for uae files upload. |
18 February 2015, 14:15 | #244 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Log was not included but probable fix is: change memory panel -> Z3 Mapping -> Real and disable JIT. (It only disables 68k JIT, it has no effect on PPC performance) You probably also have 32-bit Windows.
|
20 February 2015, 17:37 | #245 |
Registered User
Join Date: Sep 2014
Location: Germany
Posts: 14
|
Hey Toni, do you have experience in running your software in wine? In most cases, it´s 32bit windows, so yeah!
I *THINK* the problem is wine related, because that´s what I run...I should have said that. Frode´s FS-Version does not have the problems I described with the same options set. |
20 February 2015, 18:04 | #246 |
Registered User
Join Date: Jul 2014
Location: Finland
Posts: 1,178
|
i use WinUAE in WINE and never have a problem with it.
|
20 February 2015, 19:06 | #247 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Quote:
Did you even test what I suggested in previous post? (also: winuaelog.txt is required) |
|
21 February 2015, 02:40 | #248 |
m68k all the way
Join Date: Aug 2011
Location: Koalaland
Posts: 523
|
I also use WinUAE in CrossOver (which is based on Wine) and it works great. The only problem is that I am not able to use the shortcut keys that would reset the Amiga (Ctrl-Command-Command).
|
24 February 2015, 23:26 | #249 | |
Registered User
Join Date: Sep 2014
Location: Germany
Posts: 14
|
Quote:
A little grease: I used your software (and Bernd´s before) for the last 15 years on and off, now and then and I really have to say that besides the software I use for my daily work, WinUAE is the program that was installed on every machine I owned since then and I just LOVE it! I am not sure this is the right place, but definately it´s the right time to thank you personally for what you did for me and probably the whole community to keep the spirit alive! To topic: I can´t tell you what made the difference (Z3 mapping to real and JIT off didn´t do the trick for some reason) but I really *never* saw PicIV screenmodes appear in Screenmode-Prefs, but until I booted into early startup, and from there into my WB enviroment, PicassoIV just worked all of a sudden! Before, I had like 300 tries without any result. When I have time (and maybe luck) I´ll try to reproduce the issue.... (And give you logs off course) |
|
28 February 2015, 10:12 | #250 |
Registered User
Join Date: Sep 2014
Location: italy
Posts: 189
|
Hi Tony,
can i ask if is possible to have the qemuppc plugin have the --enable-kvm variable for test it on real powerpc machine ? Thanks! |
28 February 2015, 10:40 | #251 | |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Quote:
|
|
28 February 2015, 13:26 | #252 |
Registered User
Join Date: Sep 2014
Location: Germany
Posts: 14
|
...but it does not sound like a big deal, right? like this, os4.1 on old macs gets a little closer.... ;-)
|
28 February 2015, 22:54 | #253 |
Registered User
Join Date: Sep 2014
Location: italy
Posts: 189
|
|
02 March 2015, 19:39 | #254 | |
Registered User
Join Date: Aug 2014
Location: New Jersey / USA
Posts: 105
|
Quote:
|
|
02 March 2015, 20:00 | #255 | |
Registered User
Join Date: Nov 2009
Location: GDR
Age: 49
Posts: 249
|
Quote:
|
|
02 March 2015, 20:11 | #256 | |
Registered User
Join Date: Aug 2014
Location: New Jersey / USA
Posts: 105
|
Quote:
https://amigafun.wordpress.com/tag/powerpc/ |
|
19 May 2015, 09:35 | #257 |
Registered User
Join Date: Nov 2008
Location: Melbourne, Australia
Posts: 89
|
Well, I finally tried installing Amiga 4.1 via this tutorial. All went fine, didn't take too long (about 30 minutes on my lowly Core2Due E6400) and seeming works okay.
The only issue I have is that I can't see any Picasso IV screenmodes. I've tried setting the "Z3 Mapping Mode" to "real" under the WinUAE "RAM" settings tab, with no change. When I go into Picasso96Mode in Workbench, I get the message "Could Not Find Any Modes!" (see attached). The same deal under Workbench ScreenMode prefs - only AGA modes visible (also see attachment) Is it worth posting my WinUAE config or any logfiles? Cheers, Mike. |
19 May 2015, 20:19 | #258 |
morphos.pl
Join Date: Aug 2014
Location: Kraków, Poland
Posts: 104
|
Do you have a rom file to Picasso IV in the directory Roms?
|
19 May 2015, 20:40 | #259 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,519
|
Yes, no log = can't help. Those screenshots are mostly useless, they only show that it does not work (which we already know), they don't (and can't) answer the most important question: why does it not work.
|
20 May 2015, 05:53 | #260 |
Registered User
Join Date: Nov 2008
Location: Melbourne, Australia
Posts: 89
|
Yep, I have the Picasso IV files in the ROMs directory...
I've attached the boot-log, if that's of any use? Cheers, Mike. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
QEMU TCG as JIT replacement? | KillaByte | request.UAE Wishlist | 21 | 30 January 2018 16:05 |
PPC emulation for winuae | marauder | request.UAE Wishlist | 25 | 04 November 2014 06:13 |
WinUAE PPC thread | B14ck W01f | support.WinUAE | 301 | 10 September 2014 16:34 |
WinUAE ppc support? | blasterreal | support.WinUAE | 8 | 29 September 2010 00:51 |
PPC on WinUAE ? | glue | request.UAE Wishlist | 4 | 28 January 2007 12:04 |
|
|