WinUAE 3.4.0 beta series

[AMIGASYSTEM]

Here they are

[Diz_57]

Originally Posted by Toni Wilen

Do you have UAE Z3 mapping enabled? (Memory panel). It is the only mode that can support blizkick, "Real" equals now real real (Real hardware with Z3 RAM also won't work)

You must set it to UAE because automatic also defaults to Real if possible.

I haven't changed anything and it used to work... It was on auto but changing to uae made no difference and changing it to real gave the 'out of memory or too much z3 autoconfig space configured' error.

[Toni Wilen]

Originally Posted by AMIGASYSTEM

Here they are

Does http://www.winuae.net/files/b/winuae.7z fix it? (if not, include log)

[I'll reply to other reports after this is fixed]

[AMIGASYSTEM]

I do not know if I understand correctly what should I do !

-Started WinUAE Fixed-yourself attached, now the Z3 error does not go out, but while loading hangs on a black screen.

- In the config file that small change:
- Reduced on the Z3 Ram from 256 to 128
- Z3 mapping mode set to "UAE", with "Real" appeared red screen "Expansion Board Diagnostic" (I attach screenshots, config and Log)

[AMIGASYSTEM]

Excuse Toni forgot, now AFA_OS with WinUAE Fixed-yourself attached it works perfectly, i had just set Z3 mapping mode to "UAE". The problem is only on emulation OS4.1

[Toni Wilen]

Originally Posted by mritter0

SB128 no longer found. Was using ES1370 PCI sound card in Expansions in 3.3

My crystal ball says this is not fully correct report and you don't have any PCI devices or even the whole PCI bridge is missing.

Originally Posted by ED-209

Low latency vsync modes are no longer working here in fullscreen on my secondary crt, doing very strange things.
Also WASAPI EX mode will not initialize, but standard WASAPI works.

Does DirectSound still work?

[vagrant]

DirectSound works, SND is stable, but cpu is always report 100% regardless of vsync mode.
(low latency behavior is still the same).
Attached logs with same procedure in initial post, using dsound.

[Toni Wilen]

"Real" mode RTG should also now work again with 32-bit Windows.

Originally Posted by Diz_57

new beta seems to have broken blizkick again. exec library 45.20 cant be used in conjunction with an extresbuff, but either will work on their own. so a line in the startup-sequence like

blizkick * extresbuf=50000 exec45.20

causes a crash and it says halt3 where the fps counter is

I can't duplicate this. (I only tried "blizkick *" and it works correctly)

Does http://www.winuae.net/files/b/winuae.7z work? (attach log from this and 3.3 if it still does not work)

Originally Posted by losso

BTW does "Single step" have a default key binding? I only saw KEY_C6 and couldn't figure out what key that was...

END + CTRL + Pause is the default. (C6 is non-existing key that some keyboards send when using this combo for some reason)

Originally Posted by ma693541

I run Amiga OS 4.1 Final Edition and discovered this; A2065 Z2 Network with SLIRP broken, both in 32bit and 64bit version of WinUAE 3.4.0b1. It worked fine in both the 32bit and 64bit of WinUAE 3.3.0 Public Release with the same config on all 4. Nor can AmiFTP or OrigynWebBrowser connect to the net in the betas. See attached file with both logs and configfile.

This should be fixed.

[Diz_57]

toni, sorry... but did u read my first post properly? like i said the crash only occurs when you use an extresbuff in conjunction with an exec lib so the command line must be something like:

blizkick * extresbuf=50000 exec45.20

blizkick works fine alone, or with either of those options alone but not with both options together.

[Toni Wilen]

Originally Posted by Diz_57

toni, sorry... but did u read my first post properly? like i said the crash only occurs when you use an extresbuff in conjunction with an exec lib so the command line must be something like:

blizkick * extresbuf=50000 exec45.20

blizkick works fine alone, or with either of those options alone but not with both options together.

I probably lost concentration when there was no config included

Seriously, impossible to properly duplicate this without config file.

[Diz_57]

i didnt think config file would help as i thought i was giving you an easily reproduceable scenario!

the 'manage attachments' button isnt doing anything right now! is that happening to everyone? so i guess you better forget it if i didnt give you enough lol

[mark_k]

Originally Posted by Toni Wilen

- Event ("pull") mode audio support added, currently only supported by WASAPI (Vista or later only). Lower sound latency, no need for extra sound sync adjustments and also should be more stable.

Does WASAPI audio always use pull mode in beta 1?

Originally Posted by Toni Wilen

- Reduced input latency.

Could you write about how you achieved that sometime?

[psykicko]

With 3.4.0 beta my system never loads to workbench. Its only black and in the status says "halt3". With previous 3.3.0 everyhing loaded fine. Attached is my config file. Say if you need anything more from me.

[AMIGASYSTEM]

Originally Posted by Toni Wilen

Does http://www.winuae.net/files/b/winuae.7z fix it? (if not, include log)

[I'll reply to other reports after this is fixed]

Ok Toni finally solved, now all of OS4.1 configurations OS4.1 it is started, the problem was under his eyes and did not see it, aI had the check mark on MapROM Emulation.

Thank you

[Arnie]

CDTV HD.

Boots O.K from Harddrive until I add Fastram (4mb Z2). Works with slow ram but my real CDTV has 4mb non autoconfig ram.

config attached (new, made in 3.4 beta)

Hmm, something strange happening with the AF workbench-135.hdf, it's now booting. (Z2 fast still stops the HD booting though)

EDIT: Ticking uaescsi.device allows CDTV to boot from HD with Z2 ram

[mritter0]

Under Expansions, the settings aren't being saved properly.

Start WinUAE. Pick my config. Hit Load. Goto Expansions.


Change it to what was in 3.3 and Save it:


Boot into OS4.1FE.
Sashimi says: No SB128 found! :-(

Hit F12, still shows as image 2.

Quit. Start again. Pick config. Load.
Back to image 1 settings.
The changes weren't saved.

[mritter0]

OK, I see how the drop down gadget changes things. Very confusing. But still no audio.

[Toni Wilen]

Originally Posted by Arnie

CDTV HD.

Boots O.K from Harddrive until I add Fastram (4mb Z2). Works with slow ram but my real CDTV has 4mb non autoconfig ram.

config attached (new, made in 3.4 beta)

Hmm, something strange happening with the AF workbench-135.hdf, it's now booting. (Z2 fast still stops the HD booting though)

EDIT: Ticking uaescsi.device allows CDTV to boot from HD with Z2 ram

Log please from non-working config. (that worked in 3.3.0, use above winuae.7z)

Originally Posted by mritter0

OK, I see how the drop down gadget changes things. Very confusing. But still no audio.

It is the only way to have ability to enable multiple devices from same list without wasting lots of GUI space.

Log needed using config that worked in 3.3.0. (use winuae.7z above)

[Retro-Nerd]

I have problems with the low latency vsync in fullscreen to. Shows only a black screen. After pressing the F12 key i get an image but can't control the mouse though. Other sync modes seems fine.

[Arnie]

Logs & config attached.

Config works in 3.3 but not with the WinUAE.7z from post #28

(I found that the reason why the AF workbench-135.hdf wasn't working it's because it doesn't like the AF 1.3 a3000.rom??)