ffplay on winuae

[TheELF]

So,I found ffplay on aminet( ffmpeg-svnr22669-m68k.lha ),and I thought to myself "wow thats great",well thats untill I installed it and found out that it needs the ixemul.library v61 and above.
Allright i said to myself and started to search for that library,after finding it on amiga.sourceforge and installing it I realised that it is the 020 version,it will not work if I set the processor to 040 or 060,(unless I am doing something terribly wrong msg:68040 math emulation code not found) unlucky for me ffplay only works on 040 and above.

So before I start to

Is there a ixemul.library v61 for the 040 processor to be downloaded anywhere?
Is there a version of ffplay that will run on a 020 processor?
to anyone who even cares to reply.

[prowler]

Libraries exist for '000, '020, '040 and '060 processors!

http://amiga.sourceforge.net/?showpa...ixemul.library

[TheELF]

Yes, but Release Name: 48.2 ffplay needs version 61 or higher,and thats only in 020.

[Toni Wilen]

Fix your 68040.library/68060.library installation first. No 680x0.library + 68040/060 = Disabled FPU.

[prowler]

Originally Posted by TheELF

Yes, but Release Name: 48.2 ffplay needs version 61 or higher,and thats only in 020.

I'm sorry. For some reason, at this time I'm unable to download any binaries from that archive, so that wasn't clear to me.

[TheELF]

Originally Posted by Toni Wilen

Fix your 68040.library/68060.library installation first. No 680x0.library + 68040/060 = Disabled FPU.

Well I am trying to do that,but the new versions of ixemul has only the 020 version in the archive,and all the source but I have no idea how to use that to compile a working 040/060 version.

[Toni Wilen]

Originally Posted by TheELF

Well I am trying to do that,but the new versions of ixemul has only the 020 version in the archive,and all the source but I have no idea how to use that to compile a working 040/060 version.

Before debugging ixemul problems: are you 100% sure you have working 68040/060 setup? Does C:CPU list a FPU? (It says either 6888x or 68040/060 depending on OS version. No FPU = fix it first)

I don't think ixemul require any specific CPU versions for 68040 or 060.

[TheELF]

Ok, sorry Toni and thank you very much,I did not realise that,when I use the settings 040, FPU CPU internal (no other option selectable),the c:CPU command only shows the 68040 cpu,when i use 030 and below i can select the fpu 68881/2 and it will show up with the cpu command,so did the 040 have an internal fpu or not?And is there anything in the setting that i could try?

[TheELF]

Thank you very much Toni!
You where right,the problem was that the fpu was not recognised with the installed os,I had to reinstall workbench with the same config,and it showed the fpu,very strange behavior,but what can you do,right?

[Toni Wilen]

Missing 68040.library (as I said above). This problem has nothing to do with emulation, KS ROMs do not have support code for 040's and 060's built-in FPU (different stack frame for example compared to 68881/2)

Library and FPU is working if:

1) SetPatch reports "68040 support code loaded."
2) CPU command reports something like "68040/68882 (cachestuff here)"

Note that you 68040.library coming with WB installation disk DO NOT support 68060 (crashes, search this board for more information).

[TheELF]

Ohhhhhhhh Ok.
There is so much I have forgotten abot my Amiga(not that I knew anything about 040 on a real AMIGA)although I still have an unexpanded Amiga 4000.
Did not remember/realised about the 68040.library,sorry again.
Copied over that library to my old installation,and in deed it now shows the FPU.