Indivision ECS core update 1.15

wmaciv · 30 April 2017, 17:38

Just in case no one caught this...

http://wiki.icomp.de/wiki/Indivision_ECS

Mac

TuKo · 30 April 2017, 18:13

thx

E-Penguin · 30 April 2017, 20:40

Nice to see an update but it's from 2012 - 5 years seems a bit of a delay...

I'm hoping for an RTG driver for the AGA MK2CR now that Jens has the Picasso 96 code

trixster · 01 May 2017, 00:27

I wouldn't hold your breath

wmaciv · 01 May 2017, 15:30

Just thought it was nice to see the low power mode; not sure the IND ECS problems are to blame on power supplies as much as running too hot in such a stagnant area of the case.

Spacemonkey · 02 May 2017, 16:45

Any ideas on how to flash with a Vampire 600 V2 connected, as i don't really want to unplug the vampire again.

TuKo · 02 May 2017, 16:55

Quote:

Originally Posted by Spacemonkey

Any ideas on how to flash with a Vampire 600 V2 connected, as i don't really want to unplug the vampire again.

If you have USB Blaster, Quartus installed and last core as JIC ready, erase the FPGA within Quartus to boot on on-board 68000. It will disable the Vampire.

E-Penguin · 02 May 2017, 17:11

Don't cross the IndivisionECS and Vampire streams! (giant killer marshmallow men excepted)

Spacemonkey · 02 May 2017, 19:30

Quote:

Originally Posted by TuKo

If you have USB Blaster, Quartus installed and last core as JIC ready, erase the FPGA within Quartus to boot on on-board 68000. It will disable the Vampire.

Thanks. I did think that may be the only way

30 April 2017, 17:38	#1
wmaciv Registered User Join Date: Mar 2017 Location: Enterprise, AL / USA Posts: 26	Indivision ECS core update 1.15 Just in case no one caught this... http://wiki.icomp.de/wiki/Indivision_ECS Mac

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
someone with Indivision ECS has older core than v1.01?	turrican9	support.Hardware	2	11 December 2016 03:25
[WTB] Indivision AGA (for CD32/4000) + Indivision ECS	Seaside	MarketPlace	3	15 March 2012 22:03
Indivision ECS	amiga1	support.Hardware	12	01 June 2011 04:24
Trading my Indivision AGA for an Indivision ECS	8bitbubsy	Swapshop	3	11 May 2011 23:02
Minimig firmware/core update	Spellcoder	News	1	27 April 2008 23:02

30 April 2017, 18:13	#2
TuKo Apollo Team Join Date: May 2014 Location: not far Posts: 379	thx

30 April 2017, 20:40	#3
E-Penguin Banana Join Date: Jul 2016 Location: Darmstadt Posts: 1,214	Nice to see an update but it's from 2012 - 5 years seems a bit of a delay... I'm hoping for an RTG driver for the AGA MK2CR now that Jens has the Picasso 96 code

01 May 2017, 00:27	#4
trixster Guru Meditating Join Date: Jun 2014 Location: England Posts: 2,339	I wouldn't hold your breath

01 May 2017, 15:30	#5
wmaciv Registered User Join Date: Mar 2017 Location: Enterprise, AL / USA Posts: 26	Just thought it was nice to see the low power mode; not sure the IND ECS problems are to blame on power supplies as much as running too hot in such a stagnant area of the case.

02 May 2017, 16:45	#6
Spacemonkey Registered User Join Date: Apr 2016 Location: Salisbury Posts: 87	Any ideas on how to flash with a Vampire 600 V2 connected, as i don't really want to unplug the vampire again.

02 May 2017, 17:11	#8
E-Penguin Banana Join Date: Jul 2016 Location: Darmstadt Posts: 1,214	Don't cross the IndivisionECS and Vampire streams! (giant killer marshmallow men excepted)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)