Amiga and AVerMedia CE310B

TCH · 23 February 2017, 10:10

I don't know, if it's the correct category for this, but if not, then please relocate.

I have an AVerMedia CE310B and i would like to digitize my Amiga 500+'s signal, but whatever signal type i try to use, will produce a picture entirely fallen apart.

Is it a driver bug, or the card is unable to process the Amiga's signal, or i've just chosen a wrong signal type?

My Amiga shows a perfect picture both on my 1084 monitor and my Sony CRT TV.
Also the CE310B was able to capture my NES clone's signal.

Here is a capture of the stream: http://oscomp.hu/depot/amiga_fallen_apart.png

TCH · 27 February 2017, 18:31

Anybody?

idrougge · 28 February 2017, 09:37

"whatever signal type"?

TCH · 28 February 2017, 23:55

PAL/NTSC/whatever. All of them produced the same picture.

idrougge · 01 March 2017, 16:00

And you used what kind of connection?

TCH · 04 March 2017, 21:40

I used composite.

idrougge · 05 March 2017, 22:23

Composite from the RF modulator?

mark_k · 05 March 2017, 22:40

Is there any improvement if you set Workbench to an interlaced mode?

TCH · 07 March 2017, 17:06

Nope, but meanwhile i figured out, that my A1200 and the monochrome output of my A500+ are ok. It's the A520 which produces a bad output. And it's also bad on my TV. I wonder if it's the power supply again...

TCH · 09 March 2017, 15:58

It's not the power supply, like last time. The A520 gives bad image on the A1200 too. I think it's broken. Luckily, tomorrow i'll get another one.

30 October 2017, 14:09

this is not amiga or CE310B fault
related to event row count
resolution
not standard PAL

23 February 2017, 10:10	#1
TCH Newbie Amiga programmer Join Date: Jun 2012 Location: Front of my A500+ Age: 38 Posts: 372	Amiga and AVerMedia CE310B I don't know, if it's the correct category for this, but if not, then please relocate. I have an AVerMedia CE310B and i would like to digitize my Amiga 500+'s signal, but whatever signal type i try to use, will produce a picture entirely fallen apart. Is it a driver bug, or the card is unable to process the Amiga's signal, or i've just chosen a wrong signal type? My Amiga shows a perfect picture both on my 1084 monitor and my Sony CRT TV. Also the CE310B was able to capture my NES clone's signal. Here is a capture of the stream: http://oscomp.hu/depot/amiga_fallen_apart.png

27 February 2017, 18:31	#2
TCH Newbie Amiga programmer Join Date: Jun 2012 Location: Front of my A500+ Age: 38 Posts: 372	Anybody?

28 February 2017, 09:37	#3
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,332	"whatever signal type"?

28 February 2017, 23:55	#4
TCH Newbie Amiga programmer Join Date: Jun 2012 Location: Front of my A500+ Age: 38 Posts: 372	PAL/NTSC/whatever. All of them produced the same picture.

01 March 2017, 16:00	#5
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,332	And you used what kind of connection?

04 March 2017, 21:40	#6
TCH Newbie Amiga programmer Join Date: Jun 2012 Location: Front of my A500+ Age: 38 Posts: 372	I used composite.

05 March 2017, 22:23	#7
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,332	Composite from the RF modulator?

05 March 2017, 22:40	#8
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,333	Is there any improvement if you set Workbench to an interlaced mode?

07 March 2017, 17:06	#9
TCH Newbie Amiga programmer Join Date: Jun 2012 Location: Front of my A500+ Age: 38 Posts: 372	Nope, but meanwhile i figured out, that my A1200 and the monochrome output of my A500+ are ok. It's the A520 which produces a bad output. And it's also bad on my TV. I wonder if it's the power supply again...

09 March 2017, 15:58	#10
TCH Newbie Amiga programmer Join Date: Jun 2012 Location: Front of my A500+ Age: 38 Posts: 372	It's not the power supply, like last time. The A520 gives bad image on the A1200 too. I think it's broken. Luckily, tomorrow i'll get another one.

30 October 2017, 14:09	#11
dijitalxyz Posts: n/a	this is not amiga or CE310B fault related to event row count resolution not standard PAL

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)