English Amiga Board


Go Back   English Amiga Board > Support > support.Other

 
 
Thread Tools
Old 06 November 2017, 14:40   #1
stefcep2
Registered User
 
Join Date: Dec 2009
Location: Melbourne/Australia
Posts: 175
BB4: Assign Program failed error #8000000B

Just finished installing BB3 and 4 on A4000 OS3.9. It boots, resets and gets stuck on the above error.

I can boot with no startup sequence and LoadWB via cli. I have tried reverting to original OS 3.9 startup-sequence. Same error.

Any suggestions?
stefcep2 is offline  
AdSense AdSense  
Old 06 November 2017, 16:28   #2
indigolemon
Bit Copying Bard

indigolemon's Avatar
 
Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 35
Posts: 411
Which processor? Sounds like a missing or wrong 68040 library?
indigolemon is online now  
Old 06 November 2017, 22:30   #3
stefcep2
Registered User
 
Join Date: Dec 2009
Location: Melbourne/Australia
Posts: 175
phase5 68060. Was fine before I installed BB3 and BB4 update

Have phase 5 68040.library version 46.5 68040old.library version 46.5 68040new.library version 46.5 and 68060.library version 46.15 in Libs:

Last edited by stefcep2; 06 November 2017 at 22:49.
stefcep2 is offline  
Old 06 November 2017, 23:26   #4
indigolemon
Bit Copying Bard

indigolemon's Avatar
 
Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 35
Posts: 411
You could try adding set echo on to the top of your startup-sequence to see exactly when you hit the failure I suppose.

Your version numbers do mostly tally with http://aminet.net/package/driver/other/040_060Libs - so I may have you barking up the wrong tree here.
indigolemon is online now  
Old 06 November 2017, 23:55   #5
Minuous
Coder/webmaster/gamer
Minuous's Avatar
 
Join Date: Oct 2001
Location: Canberra/Australia
Posts: 1,765
I can't reproduce the issue here yet unfortunately. I can rule out a few causes though: 68040/68060 libraries are not updated by BB3&4, neither is the Assign command.

I have a hypothesis that dos.library 42.1 may be the cause. I suggest trying with the old V40.3. Before you tried booting with the old startup-sequence, did you turn off the machine? Otherwise dos.library 42.1 will still be in memory.

What options did you choose when installing (eg. contributions)?

>I can boot with no startup sequence and LoadWB via cli.

Is the system usable when you do that? (ie. is Assign the only program causing problems?)

Last edited by Minuous; 07 November 2017 at 00:23.
Minuous is offline  
Old 07 November 2017, 06:27   #6
stefcep2
Registered User
 
Join Date: Dec 2009
Location: Melbourne/Australia
Posts: 175
Oh crap! Hard drive does not spin up. No sound, nothing. This set up took me ages to get right (Of course not blaming Boing bag updates).

*sigh* looks re-install time....
stefcep2 is offline  
Old 07 November 2017, 22:43   #7
stefcep2
Registered User
 
Join Date: Dec 2009
Location: Melbourne/Australia
Posts: 175
When you have an 68060- A4000, and the smalles hard drive you have is 20gb and the emergency back up floppy has read errors as does your 3.1 Install disc as are half the few floppies you have, and you don't have an amiga online and you rely on compact flash to sneaker net files, and your Fastata 4000 conflicts with the old HdToolbox and Winuae doesn't recognise the hard drive unless you don't use IDE, but then gives you a NDOS hard drive install you can;t boot off unless you boot of a floppy Workbench its not a trivial thing to get it up and running. Now to install CGX, updates, and patches to make it usable.
stefcep2 is offline  
Old 15 November 2017, 16:37   #8
indigolemon
Bit Copying Bard

indigolemon's Avatar
 
Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 35
Posts: 411
Wooft! That's dedication there!
indigolemon is online now  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Program failed (error #8000000B) arti Coders. General 2 13 January 2017 07:40
iGame error #8000000B paywjlk support.WinUAE 7 18 August 2015 22:16
ramlib program failed (error #80000004) on real Amiga Starglider 2 support.Other 47 31 May 2015 19:23
Program failed (error #8000000B) Fieldday support.Hardware 14 07 November 2009 21:57
Program Failed Error Daniel support.Apps 3 14 March 2006 15:09

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 19:40.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Page generated in 0.06812 seconds with 15 queries