teac FD235 HF 201U working on amiga ???

mrodfr · 07 June 2010, 13:51

hello,

just found a teac FD235 HF 201U, from an old PC.

could this floppy drive work on an amiga ???

jumpers:

HH0
OP
LHI
HHI
d1
d0

Thanks for the answers...

rkauer · 07 June 2010, 18:53

http://www.rabayjr.com/Download/Teac%20FD235HF.pdf

So just move two jumpers and problem solved.

mrodfr · 07 June 2010, 19:40

Hello,

the driver not look like this picture posted.

he has just 2 vertical row of pins.

** HHO
** OP
** LHI
** HHI
** D1
** DO

OP and D1 are with a jumper.

this driver came from an old PC.

http://www.elektronik.si/phpBB2/view...0ee8b9e56e6e3b

see img053 fig2 or fig8.

rkauer · 07 June 2010, 22:41

Move the D1 jumper to D0, this will make the drive respond to DS0 (same as DF0 on Amiga).

The rest on the page 4 of the PDF I linked above.

mrodfr · 08 June 2010, 12:46

Hello

sorry but I don't understand....the page 4 of the PDF.

I have a 201U and...not listed on the PDF...

rkauer · 08 June 2010, 21:13

Use the settings on page four, if no bananas, then go to the EAB page "converting floppies to Amiga use". Just a matter of soldering a bridge and swap two lines as you already changed the drive to DS1.

07 June 2010, 13:51	#1
mrodfr Registered User Join Date: Jan 2005 Location: 62-France Age: 56 Posts: 413	teac FD235 HF 201U working on amiga ??? hello, just found a teac FD235 HF 201U, from an old PC. could this floppy drive work on an amiga ??? jumpers: HH0 OP LHI HHI d1 d0 Thanks for the answers...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Teac FD-235HF A291 on any amiga 2 drive compatable	kjmann14	Hardware mods	7	17 June 2011 01:06
amiga 1200 + teac 224 cdrom	tnk2k	support.Hardware	21	10 May 2009 21:27
A1200 Teac floppy?	Secret Vampire	support.Hardware	12	12 April 2009 03:50
External PCMCIA CD-Rom on Amiga 1200 Teac CD-224PE	Raging Rabbit	support.Hardware	23	23 June 2008 05:39
Teac FD-235HF (341-U) on Amiga 500	_ThEcRoW	support.Hardware	6	31 July 2005 23:42

07 June 2010, 18:53	#2
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	http://www.rabayjr.com/Download/Teac%20FD235HF.pdf So just move two jumpers and problem solved.

07 June 2010, 19:40	#3
mrodfr Registered User Join Date: Jan 2005 Location: 62-France Age: 56 Posts: 413	Hello, the driver not look like this picture posted. he has just 2 vertical row of pins. HHO OP LHI HHI D1 DO OP and D1 are with a jumper. this driver came from an old PC. http://www.elektronik.si/phpBB2/view...0ee8b9e56e6e3b see img053 fig2 or fig8.

07 June 2010, 22:41	#4
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Move the D1 jumper to D0, this will make the drive respond to DS0 (same as DF0 on Amiga). The rest on the page 4 of the PDF I linked above.

08 June 2010, 12:46	#5
mrodfr Registered User Join Date: Jan 2005 Location: 62-France Age: 56 Posts: 413	Hello sorry but I don't understand....the page 4 of the PDF. I have a 201U and...not listed on the PDF...

08 June 2010, 21:13	#6
rkauer I hate potatos and shirts Join Date: Oct 2007 Location: Sao Leopoldo / Brazil Age: 58 Posts: 3,482	Use the settings on page four, if no bananas, then go to the EAB page "converting floppies to Amiga use". Just a matter of soldering a bridge and swap two lines as you already changed the drive to DS1.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)