NEC Multisync 2A Amiga 15Khz compatible? - Page 2

thgill · 07 January 2017, 07:16

Why not pick up a Sony PVM?

Most of them support 15khz RGB (along with composite and svideo for your c64 needs) and also have no problem with both 50 and 60hz signals.

Then get a scart to BNC cable from the guy in Florida on eBay, plug in an amiga scart cable and job sorted.

Amiga1992 · 07 January 2017, 18:54

Because those don't do 31Khz as far as I know.
I want one monitor that can do both 15Khz and Productivity, for example.

thgill · 07 January 2017, 20:21

Ahhhh. Didn't realize 31khz was important.

Amiga1992 · 08 January 2017, 19:37

Yeah, it's the only reason to get a Multiscan monitor.
Otherwise you are right, PVM/BVMs are the way to go

tiffers · 02 May 2020, 10:48

Thread necro. Sorry.

What about an NEC Multisync P401? That thing has all of the inputs. Surely it has to support 15kHz?

If I could get one for sub $100 (Australian), do you think that would be a good buy for running on an A1200/A3000/4000?

demolition · 02 May 2020, 11:47

Quote from https://www.nec-display.com/ap/en_di...01/index.html:

Quote:

Horizontal: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input)

So that would be a yes since 15.625 kHz is what you are looking for.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEC Multisync II & A500?	stet	support.Hardware	7	23 December 2011 08:37
NEC MultiSync FE991SB White 19"	NovaCoder	support.Hardware	2	02 April 2008 01:51
NEC Multisync 3D	Galaxy	support.Hardware	5	29 June 2006 18:05
31khz modes on Nec Multisync II	lauri_t	support.Hardware	3	14 December 2005 06:27
NEC Multisync M500...	teh	support.Hardware	1	27 November 2005 03:04

07 January 2017, 07:16	#21
thgill Registered User Join Date: May 2008 Location: Mason, Ohio / USA Age: 48 Posts: 391	Why not pick up a Sony PVM? Most of them support 15khz RGB (along with composite and svideo for your c64 needs) and also have no problem with both 50 and 60hz signals. Then get a scart to BNC cable from the guy in Florida on eBay, plug in an amiga scart cable and job sorted.

07 January 2017, 18:54	#22
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,645	Because those don't do 31Khz as far as I know. I want one monitor that can do both 15Khz and Productivity, for example.

07 January 2017, 20:21	#23
thgill Registered User Join Date: May 2008 Location: Mason, Ohio / USA Age: 48 Posts: 391	Ahhhh. Didn't realize 31khz was important.

08 January 2017, 19:37	#24
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,645	Yeah, it's the only reason to get a Multiscan monitor. Otherwise you are right, PVM/BVMs are the way to go

02 May 2020, 10:48	#25
tiffers Registered User Join Date: Aug 2007 Location: Perth / Australia Posts: 20	Thread necro. Sorry. What about an NEC Multisync P401? That thing has all of the inputs. Surely it has to support 15kHz? If I could get one for sub $100 (Australian), do you think that would be a good buy for running on an A1200/A3000/4000?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)