17 October 2012, 14:14 | #1 |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
Drivers for Mediator PCI?
Hi!
Im having problem with my mediator which I bought recently. I have some old drivers and i think thad could be the problem, becouse when i start my AmigaOs3.9 it hangs when it should load media.mixer. My SB is Creative CT480. Are there any new drivers for the Mediator and SB? I contacted Elbox support, but I got no answer. Any help would be appreciated. |
17 October 2012, 14:28 | #2 |
Professional slacker!
|
You can download the update from their site:
http://elbox.com/downloads_mediator.html You still need your MMCD AFAIK. I'm pretty sure I'm using 2.1 Update and everything is working fine I use SB128 and FM801 cards though. |
17 October 2012, 14:40 | #3 |
Registered User
Join Date: Sep 2012
Location: Dorathea/AT
Posts: 376
|
You don't need the MMCD
The install can be done without the CD and Mixer
|
17 October 2012, 15:56 | #4 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
the drivers for your mediator shouldnt hang a bootup in startup.
check the calls for the mixer program are at the top of your user startup. could you tell us your full setup please with a list of hardware thats in this setup just in case, and also helps us understand whats happenning. |
17 October 2012, 17:31 | #5 |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
Ok, my setup is A1200 with Magnum 1230 turbo card with 16Mb RAM. Running Amiga OS3.9 on my 80Gb hard drive. The OS doesn`t load if turbo card is not inserted.
Now on this setup i installed Mediator PCI with S3Trio64V+, Flyvideo98 and SB Creative CT4810. If all of this device are inserted into mediator all i got is black screen. If i install only VGA i get black screen. If I insert TV tuner, system boots up normally, with S3 hardware and media.mixer error. If i insert SB into mediator the only screen i sea is workbench with mouse pointer Thad i cannot move (system hangs). I use LCD 17" monitor and video converter connected to amiga composite out. My PSU is old AT Thad i converted to amiga connector. The drivers Thad I have are from year 2002. I hoped to install SB and TV tuner at least, if VGA is maybe defect. |
17 October 2012, 17:38 | #6 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
did you setup the vga card dos drivers properly,some parts require you set that up yourself.
can you discribe how you did it?using p96 etc. some cards will not work without the video card being in the system.as some cards require some of the video cards memory to work. the only cards i have used myself are: a voodoo3 3000 a radeon 9250 and a 4mb virge based card also try to setup the cards so you get the video card working first and setup rtg then try sound and other cards dont try all of them at once youll just make fault finding difficult EDIT:basicly install the drivers for the mediator (using the setup script)then open shell/cli and type pciinfo you should see a list of cards if they are there.(after a reboot and removing the dosdrivers (if you made any)) Last edited by roy bates; 17 October 2012 at 18:00. |
17 October 2012, 18:01 | #7 |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
I installed the drivers i got with mediator then downloaded S3Trio.lha and copy them into directories. Then I inserted cards and try it out. With the result I described. Should I do something else first?
I read and follow the Mediator instruction, but i think they re not Thad good. How do I start RTG mode in AmigaOS? EDIT: OK will try it out. |
17 October 2012, 18:05 | #8 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
where did you install the files after unarchiving them?
did you try the cli/shell command pciinfo?(this shows the cards in the slots. have you tried to setup p96? i'll try and see what you have to do for the card you have with my mmcd,i'll be back in a bit(thats if theres any info on it on the cd).... |
17 October 2012, 18:10 | #9 |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
The directories where devs, libs, prefs. Just the ones in archive. Will try pcinfo. With p96 I get no screen reolutions or something like Thad.
Will try pcinfo first. |
17 October 2012, 18:15 | #10 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
ok,open picasso96mode in prefs,could you tell me what it says in the window marked "settings"
i'll wait,i'll be back in a minute with a cup of tea lol |
17 October 2012, 18:30 | #11 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
ok my mmcd doesent say anything about your card as far as setting it up(any of the three mmcd versions i have) so,can you upload your s3trio.lha file to "the zone" please so i can have a look?
maybe theres a note to how to do this in p96 in the archive.then when ive worked it out i'll try to walk it through with you from the beginning. EDIT:i got inpatient and downloaded the s3trio archive and had a look lol. go into prefs then use "show all files" open env-archive then open mediator then click on trio64mem(it should open in editpad in os 3.9) then edit the part where it says,0 mb and change it to whatever your card is I.E: 1 MB or 2 MB then save and reboot. EDIT2:while your in the mediator drawer in env-archive click on the icon mmu and make sure it says: YES and not NO in the settings and save it. then open picasso96mode in prefs and see if the card can be added. right click then scroll down to "attach seting to" under "board0:" should be your card.you should in theary be able to make screen modes as usual. Last edited by roy bates; 17 October 2012 at 19:59. |
17 October 2012, 19:57 | #12 |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
Sorry for late response, had to take my GF shopping I changed Trio64 pref, but all i get is black screen. In Picasso96 i get "Could not find any modes!
Option Settings is empty. If Mediator is empty, no card inserted. |
17 October 2012, 20:00 | #13 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
please read post#11 in this thread.
EDIT:the card has to be in the pci slot to be recognised in the system Last edited by roy bates; 17 October 2012 at 20:07. |
17 October 2012, 20:08 | #14 |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
In the folder ENV-ARCHIVE\Mediator i got this files: Trio64Mem, Trio64Int, Background, Warp3D, TV.prefs, FastEthernet. I don`t have any mm icons! Did i do something wrong when installing? My desktop [IMG=http://www.image-share.com/upload/1804/225.jpg]
Last edited by UbiMaiden; 17 October 2012 at 20:31. |
17 October 2012, 20:20 | #15 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
its no big deal,run the editpad program and make the file "mmu".
open editpad then type: YES and right click and scroll to "project" and to "save as..." and put it in prefs/env-archive/mediator. also open warp3d and make sure it says NO and save it. |
17 October 2012, 20:39 | #16 | |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
Quote:
EDIT:The name on my mediator is "Mediator PCI" rev. 01. I think thads the old one, it is used, not new. I tryed with jumper on 4MB and 8MB. I deleted directory DOSDrives, but nothing changed. The VGA works in PC. It must be something wrong with my AmigaOS, becouse i can start workbench with floopy drive and VGA inserted into mediator. Will try reinstalling AmigaOS on the weekend when i have more free time. I used p96 before, but im not an expert. Last edited by UbiMaiden; 18 October 2012 at 14:42. |
|
17 October 2012, 20:42 | #17 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
you have to setup your screenmodes first in p96 in an aga screenmode first,this may sound like a silly question but have you used p96 before?
are you trying to see a picture on the vga screen while the card is plugged in,im a bit confused. OR are you getting a black screen in an aga screenmode while booting with the card plugged in? i'm going to make another cup of tea,i'll be back in a bit EDIT:i'll post a pic of what it should look like in p96mode Last edited by roy bates; 17 October 2012 at 21:05. |
17 October 2012, 21:06 | #18 | |
Registered User
Join Date: Oct 2012
Location: Slovenia
Posts: 45
|
Quote:
Thanks for the help! I realy appreciate it! |
|
17 October 2012, 21:09 | #19 |
Registered User
Join Date: Apr 2011
Location: birmingham
Age: 55
Posts: 2,827
|
not a problem remove the dos driver from devs and reboot and report back.
if you still get a black screen test as you where going to in a pc to see if the card is working in a bios screen if you have to did you get the mediator new or used, is it a mediator1200 or lt4 or sx or tx etc? can you tell us the jumper settings on the busboard as well pleasesorry completely forgot about this part. Last edited by roy bates; 17 October 2012 at 21:20. |
17 October 2012, 21:21 | #20 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
latest mediator drivers? | Akiko | request.Apps | 3 | 07 November 2010 21:23 |
SELL: Prometheus PCI (NEW) with Drivers | zerec@hotmail.d | MarketPlace | 0 | 18 December 2009 12:55 |
Mediator z4 plus PCI | Paradroid90 | support.Hardware | 6 | 13 July 2008 21:14 |
Help! Mediator PCi 1200 | lopos2000 | support.Hardware | 24 | 01 September 2006 09:51 |
Mediator PCI A1200 | girv | support.Hardware | 11 | 17 October 2004 16:59 |
|
|