Right mouse button not working?

NovaCoder · 08 May 2011, 15:29

Hiya,

Got a bit of a strange one, just got CW running on my real Amiga for the first time and everything seems fine apart from the fact that the right mouse button doesn't seem to work.

I've tried the mouse on the PC and it's ok and it also goes into the early startup if both buttons are held down so I guess that means it's work fine.

It's not use magic menu either, I mean the right mouse button seem to be ignored by WB (can't even access the top menu).

Any ideas?

Toni Wilen · 08 May 2011, 15:41

Stuck right or middle button? (or bend mouse port pin etc) Does early startup open if you only keep left button pressed?

FOL · 08 May 2011, 16:38

What about booting from floppy WB 3.1?
Does both buttons work there to?

This would rule out a software issue, if still dont work.
Then what toni said, could even be leaking caps (if you havent had them changed) / associated circuit?

NovaCoder · 09 May 2011, 06:26

Strange, installed a clean 3.9 install and then played with the Micromys buttons a bit and it's now working, not sure if it was a software or HW issue.

08 May 2011, 15:29	#1
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	Right mouse button not working? Hiya, Got a bit of a strange one, just got CW running on my real Amiga for the first time and everything seems fine apart from the fact that the right mouse button doesn't seem to work. I've tried the mouse on the PC and it's ok and it also goes into the early startup if both buttons are held down so I guess that means it's work fine. It's not use magic menu either, I mean the right mouse button seem to be ignored by WB (can't even access the top menu). Any ideas?

08 May 2011, 16:38	#3
FOL PSPUAE DEV Join Date: Nov 2006 Location: Wales / UK Age: 45 Posts: 5,999	What about booting from floppy WB 3.1? Does both buttons work there to? This would rule out a software issue, if still dont work. Then what toni said, could even be leaking caps (if you havent had them changed) / associated circuit? Last edited by FOL; 09 May 2011 at 10:59.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 Button support not working	Fabie	support.WinUAE	52	17 February 2017 07:31
A600 right mouse button not working	protek	support.Hardware	48	18 March 2013 14:57
Amiga Mouse Button Switches	amigakit.com	MarketPlace	0	09 September 2012 18:40
Problem right mouse button	3dfx4ever	support.Hardware	3	17 February 2011 08:33
A2000 stopped seeing right mouse button	shirsch	support.Hardware	4	22 August 2008 03:03

08 May 2011, 15:41	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,506	Stuck right or middle button? (or bend mouse port pin etc) Does early startup open if you only keep left button pressed?

09 May 2011, 06:26	#4
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	Strange, installed a clean 3.9 install and then played with the Micromys buttons a bit and it's now working, not sure if it was a software or HW issue.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)