Registered TermiteTCP if possible?

scrappysphinx · 04 March 2008, 13:36

Hi guys, if any has a registered copy of TermiteTCP could they please let me have it. I'm trying to set up a 3com 3C589C Ethernet on A1200 using miami which says connected but i have no internet available and cannot connect to ftp, So i thought i would like to try something different and heard termite might be ok.

Many Thanks

Mike

kriz · 04 March 2008, 13:43

You tried MiamiDX ? Tried staic ip settings ? Checked if you can ping between machines on the newtork.

Also if using dhcp check dns settings..

scrappysphinx · 04 March 2008, 13:47

Hi Kriz, i am trying to ICS from winxp sharing my wireless connection. Setup MiamiDX with Static IP and when i click online it says connected and using an ftp prog called rcftpd on amiga and flashfxp on pc i can now connect to amiga but cannot browse, doesn't show any files. i also have Aweb installed as a browser but cannot get online.
Just reading through posts and someone suggested trying termite.

Thanks for the help.

Mike

kriz · 04 March 2008, 14:44

Ahh probably dns settings missing, im at work so i dont have in front of me ..

You can add manually or you set one setting in Miami to resolve it automaticly..

But what about ping back and forth ?

scrappysphinx · 04 March 2008, 15:22

Hi Kriz, i looked deeeper into DNS settings and found i had forgot to save the MiamiDX settings after setting up DNS.
I have now just added the DNS server 192.168.0.1 (Win ICS) and saved and am now using Aweb to write this reply.

Now just gotta get FTP working.
Possibly gonna try and see about samba too.
Endless world of possibilities and fun!

Thanks for all your help.

Mike

JDunlap · 05 March 2008, 03:13

scrappysphinx,

I had recently posted about Termite. My problem with it was that it does not use network cards and would only allow me to use a modem, etc. I have now switched over to Miami, which, in my opinion, is much better.

From your post, I assume that you are trying to run the FTP server on your Amiga? I have this connected to my A600 by using this ftpd from Aminet. It works well when using ftp from a command prompt, but not when using SmartFTP as SmartFTP tends to add leading back slashes. Such as "Work:" becomes "\Work:", and the miggy doesn't like that.

I will have to give flashfxp a try.

Hope this helps.

scrappysphinx · 16 March 2008, 02:07

Hi JDunlap, thanks for the heads up, I will try out the software but i actually got it sorted. I installed amiga explorer (cloanto) from the amiga forever package which allows for ethernet connection and data transfer. I now have a fully functioning ftp/internet amiga.

Thanks again for the help

Mike

04 March 2008, 13:36	#1
scrappysphinx Registered User Join Date: Jan 2008 Location: Nottingham Age: 39 Posts: 480	Registered TermiteTCP if possible? Hi guys, if any has a registered copy of TermiteTCP could they please let me have it. I'm trying to set up a 3com 3C589C Ethernet on A1200 using miami which says connected but i have no internet available and cannot connect to ftp, So i thought i would like to try something different and heard termite might be ok. Many Thanks Mike

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm registered!	Amiga1992	Retrogaming General Discussion	31	27 February 2022 14:43
GadToolsBox 3 Registered	Leandro Jardim	request.Apps	9	13 November 2012 00:12
Registered MBench	Amiga1992	request.Apps	25	10 February 2011 00:20
hi all - just registered	scatman	Nostalgia & memories	20	18 May 2008 02:22
Getting Registered - How Long??	scrapser	project.WHDLoad	8	05 May 2008 12:11

04 March 2008, 13:43	#2
kriz Junior Member Join Date: Sep 2001 Location: No(R)Way Age: 41 Posts: 3,198	You tried MiamiDX ? Tried staic ip settings ? Checked if you can ping between machines on the newtork. Also if using dhcp check dns settings..

04 March 2008, 13:47	#3
scrappysphinx Registered User Join Date: Jan 2008 Location: Nottingham Age: 39 Posts: 480	Hi Kriz, i am trying to ICS from winxp sharing my wireless connection. Setup MiamiDX with Static IP and when i click online it says connected and using an ftp prog called rcftpd on amiga and flashfxp on pc i can now connect to amiga but cannot browse, doesn't show any files. i also have Aweb installed as a browser but cannot get online. Just reading through posts and someone suggested trying termite. Thanks for the help. Mike

04 March 2008, 14:44	#4
kriz Junior Member Join Date: Sep 2001 Location: No(R)Way Age: 41 Posts: 3,198	Ahh probably dns settings missing, im at work so i dont have in front of me .. You can add manually or you set one setting in Miami to resolve it automaticly.. But what about ping back and forth ?

04 March 2008, 15:22	#5
scrappysphinx Registered User Join Date: Jan 2008 Location: Nottingham Age: 39 Posts: 480	Hi Kriz, i looked deeeper into DNS settings and found i had forgot to save the MiamiDX settings after setting up DNS. I have now just added the DNS server 192.168.0.1 (Win ICS) and saved and am now using Aweb to write this reply. Now just gotta get FTP working. Possibly gonna try and see about samba too. Endless world of possibilities and fun! Thanks for all your help. Mike

05 March 2008, 03:13	#6
JDunlap Registered User Join Date: Dec 2007 Location: USA Age: 50 Posts: 85	scrappysphinx, I had recently posted about Termite. My problem with it was that it does not use network cards and would only allow me to use a modem, etc. I have now switched over to Miami, which, in my opinion, is much better. From your post, I assume that you are trying to run the FTP server on your Amiga? I have this connected to my A600 by using this ftpd from Aminet. It works well when using ftp from a command prompt, but not when using SmartFTP as SmartFTP tends to add leading back slashes. Such as "Work:" becomes "\Work:", and the miggy doesn't like that. I will have to give flashfxp a try. Hope this helps.

16 March 2008, 02:07	#7
scrappysphinx Registered User Join Date: Jan 2008 Location: Nottingham Age: 39 Posts: 480	Hi JDunlap, thanks for the heads up, I will try out the software but i actually got it sorted. I installed amiga explorer (cloanto) from the amiga forever package which allows for ethernet connection and data transfer. I now have a fully functioning ftp/internet amiga. Thanks again for the help Mike

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)