WinUAE 2.1.0 beta series (was 2.0.2) - Page 2

hexaae · 10 January 2010, 12:38

Quote:

Originally Posted by Toni Wilen

I am quite sure this has nothing to do with this thread.

... ok, sorry I thought it could have something to do with AGA emulation.
In the meanwhile I've found that switching on "Sound emulation 100%" instead of simple "Sound enabled" fixed the timing issues with Tubular Worlds!

Toni Wilen · 10 January 2010, 12:44

Quote:

Originally Posted by hexaae

... ok, sorry I thought it could have something to do with AGA emulation.
In the meanwhile I've found that switching on "Sound emulation 100%" instead of simple "Sound enabled" fixed the timing issues with Tubular Worlds!

No, it had nothing to do with 2.0.2 beta series. Only post here if it IS 2.0.2 specific issue.

dlfrsilver · 11 January 2010, 19:43

Toni, i have just tried Stardust, ipf 2102, the stardust map vessel has color corruption.

a little pic below :

Toni Wilen · 11 January 2010, 19:54

Quote:

Originally Posted by dlfrsilver

Toni, i have just tried Stardust, ipf 2102, the stardust map vessel has color corruption.

a little pic below :

Can't duplicate (argh, eye cancer screenshot)

dlfrsilver · 11 January 2010, 20:59

config A500 OCS 512kb chip ram + 512kb slow ram cycle-exact.

Toni Wilen · 11 January 2010, 21:17

Quote:

Originally Posted by dlfrsilver

config A500 OCS 512kb chip ram + 512kb slow ram cycle-exact.

Naturally. (any other configuration and I would have said "try again") Still can't duplicate it.

Can you duplicate it? Always test it at least twice. Always create statefile when the problem happens (very useful if it is difficult to duplicate)

dlfrsilver · 11 January 2010, 22:04

no pb ! i'll do that !

EDIT : well it seems it's ok this time......

Kitty · 11 January 2010, 22:09

Quote:

Originally Posted by dlfrsilver

Toni, i have just tried Stardust, ipf 2102, the stardust map vessel has color corruption.

I cant see any corruption in that pic you posted, where abouts is it?

Steve · 11 January 2010, 22:40

Quote:

Originally Posted by Kitty

I cant see any corruption in that pic you posted, where abouts is it?

It should look like the ship in this picture. His colours were wrong for some reason. I've taken this using IPF 2102 and the latest WinUAE beta and found no problems.

Mad-Matt · 11 January 2010, 23:11

it looks like soemthing that got fixed unknowingly. Tested in uae201 first and the ship was just a solid black rectangle. Updated to 202b3 and no such issue, all is good.

I did notice screen centering didnt like the map screen though, but thats nothing to be concerned about (I dont normaly use centering anyway).

Toni Wilen · 12 January 2010, 08:51

Quote:

Originally Posted by Mad-Matt

it looks like soemthing that got fixed unknowingly. Tested in uae201 first and the ship was just a solid black rectangle. Updated to 202b3 and no such issue, all is good.

I did notice screen centering didnt like the map screen though, but thats nothing to be concerned about (I dont normaly use centering anyway).

This is not related and nothing was fixed unknowingly. It is clearly marked in changelogs..

Centering don't work because this screen sets standard stupid display position values. (EDIT: fixed, start is normal, end is far out of displayable area)

Photon · 13 January 2010, 23:52

Beta 3 tested here.

Toni Wilen · 16 January 2010, 11:30

http://www.winuae.net/files/b/winuae_2020b4.zip

Beta 4:

- ADDX and SUBX timing updates
- ABCD and SBCD idle cycle position in -(An),-(An) mode fixed
- EXG idle cycle and prefetch swapped
- BCLR/BSET/BCHG/BTST idle cycle and prefetch swapped
- writing to blitter registers while active could have confused blitter emulation logic, stopping the blitter mid blit (stopping because emulation got confused, not because emulation detected situation when it should really stop)
- plain A500 OCS/ECS byte writes to custom registers fixed (I think this was using 68020/AGA behavior for all modes accidentally)
- interrupt delay and 68000 IPL sampling timing improved
- windowed mode window was sometimes incorrectly detected as resized when it only lost focus (native mode size was changed to current window size)

Big CD32/CDTV CD handling update:

- stupid MCI CD32/CDTV CD audio replaced with simple "audio ripper" that reads the digital CD audio data and sends it to audio device. NOTE: no jitter correction yet (possibly bad sound if your drive is old enough to not have accurate streaming support)
- CDTV CD hardware volume control now supported
- CD32 CD mute on/off "volume" control supported (no real volume..)
- Sound-panel volume also adjusts CD32/CDTV CD audio volume
- CD32/CDTV Q sub channel data virtualized (does not need real drive anymore, makes new things possible, see below)
- Built-in CUE CD image support, including CD audio track support! .CUE + single big .BIN and .CUE + .BIN + .WAVs supported (MP3 audio is also supported if you have mp3 codec installed but all tracks will be decoded before emulation starts, at least for now..) Most common data tracks supported. Plain iso images also supported. Problems = logs AND .cue file required. cdimage0=<path to .cue/.iso> in config file, command line parameter -cdimage=<path to .cue/.iso> can also be used. No GUI support yet.

Toni Wilen · 16 January 2010, 14:52

Little update (same filename), mp3 audio track is now unpacked only when it is played for the first time.

Mp3 was unpacked earlier previously because unpacking was easiest way to get size of file. (size is needed for TOC) Now duration calculation is done by separate mp3 parser.

JohnF · 16 January 2010, 22:01

Zool: After intro, no CDDA with earlier beta4, same and minidump from later b4.

Zool - Ninja of the 'Nth' Dimension (1993)(Gremlin)[!][S ZOOL 1 02].zip
SHA1: bf466cd8c5d3319ab0b079cba6a1858d6d0e7ac6

Logs and dump attached (from later b4).

Kyon · 17 January 2010, 07:57

- MOVE address error handling may be temporarily broken

thats fixed ?

Toni Wilen · 17 January 2010, 10:10

Quote:

Originally Posted by JohnF

Zool: After intro, no CDDA with earlier beta4, same and minidump from later b4.

http://www.winuae.net/files/b/winuae.zip should fix this (last track length was calculated incorrectly, result was zero with this image..)

JohnF · 17 January 2010, 12:04

Quote:

Originally Posted by Toni Wilen

http://www.winuae.net/files/b/winuae.zip should fix this (last track length was calculated incorrectly, result was zero with this image..)

Yes, that fixed it.

msayed1977 · 17 January 2010, 14:34

Quote:

Originally Posted by Kyon

- MOVE address error handling may be temporarily broken

thats fixed ?

Please answer, Toni.

Toni Wilen · 17 January 2010, 14:46

Quote:

Originally Posted by Kyon

- MOVE address error handling may be temporarily broken

thats fixed ?

Yes and no. It has never been 100% correct and there was hacks that "fixed" few special cases. I removed the hacks and results should still be same but other never tested cases may have different results. (still wrong, now correct or broken now)

Nothing important, 99% of programs won't ever cause address errors and those that care, rarely care about return address in stack (which is the only difference in this beta, in some move variants)

11 January 2010, 19:43	#23
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,413	Toni, i have just tried Stardust, ipf 2102, the stardust map vessel has color corruption. a little pic below : Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE 2.5.1 beta series	Toni Wilen	support.WinUAE	69	22 December 2012 10:22
WinUAE 2.3.3 beta series	Toni Wilen	support.WinUAE	124	17 September 2011 15:48
WinUAE 2.3.2 beta series	Toni Wilen	support.WinUAE	79	31 May 2011 19:39
WinUAE 2.3.0 beta series (was 2.2.1)	Toni Wilen	support.WinUAE	229	22 September 2010 19:20

11 January 2010, 20:59	#25
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,413	config A500 OCS 512kb chip ram + 512kb slow ram cycle-exact.

11 January 2010, 22:04	#27
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,413	no pb ! i'll do that ! EDIT : well it seems it's ok this time......

11 January 2010, 23:11	#30
Mad-Matt Longplayer Join Date: Jan 2005 Location: Lincoln / UK Age: 44 Posts: 1,848	it looks like soemthing that got fixed unknowingly. Tested in uae201 first and the ship was just a solid black rectangle. Updated to 202b3 and no such issue, all is good. I did notice screen centering didnt like the map screen though, but thats nothing to be concerned about (I dont normaly use centering anyway).

13 January 2010, 23:52	#32
Photon Moderator Join Date: Nov 2004 Location: Eksjö / Sweden Posts: 5,602	Beta 3 tested here.

16 January 2010, 11:30	#33
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,506	http://www.winuae.net/files/b/winuae_2020b4.zip Beta 4: - ADDX and SUBX timing updates - ABCD and SBCD idle cycle position in -(An),-(An) mode fixed - EXG idle cycle and prefetch swapped - BCLR/BSET/BCHG/BTST idle cycle and prefetch swapped - writing to blitter registers while active could have confused blitter emulation logic, stopping the blitter mid blit (stopping because emulation got confused, not because emulation detected situation when it should really stop) - plain A500 OCS/ECS byte writes to custom registers fixed (I think this was using 68020/AGA behavior for all modes accidentally) - interrupt delay and 68000 IPL sampling timing improved - windowed mode window was sometimes incorrectly detected as resized when it only lost focus (native mode size was changed to current window size) Big CD32/CDTV CD handling update: - stupid MCI CD32/CDTV CD audio replaced with simple "audio ripper" that reads the digital CD audio data and sends it to audio device. NOTE: no jitter correction yet (possibly bad sound if your drive is old enough to not have accurate streaming support) - CDTV CD hardware volume control now supported - CD32 CD mute on/off "volume" control supported (no real volume..) - Sound-panel volume also adjusts CD32/CDTV CD audio volume - CD32/CDTV Q sub channel data virtualized (does not need real drive anymore, makes new things possible, see below) - Built-in CUE CD image support, including CD audio track support! .CUE + single big .BIN and .CUE + .BIN + .WAVs supported (MP3 audio is also supported if you have mp3 codec installed but all tracks will be decoded before emulation starts, at least for now..) Most common data tracks supported. Plain iso images also supported. Problems = logs AND .cue file required. cdimage0=<path to .cue/.iso> in config file, command line parameter -cdimage=<path to .cue/.iso> can also be used. No GUI support yet.

16 January 2010, 14:52	#34
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,506	Little update (same filename), mp3 audio track is now unpacked only when it is played for the first time. Mp3 was unpacked earlier previously because unpacking was easiest way to get size of file. (size is needed for TOC) Now duration calculation is done by separate mp3 parser.

17 January 2010, 07:57	#36
Kyon Banned Join Date: Dec 2008 Location: SOS Brigade Age: 32 Posts: 696	- MOVE address error handling may be temporarily broken thats fixed ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)