Gotek sound emulation

xalakibaniou · 09 February 2022, 12:07

I have gotek drive set up from amigakit couple of years now. It came with oled, rotary encoder and flashfloppy 3.12a firmware. I use it as internal df0 on an A500. I cant get any sound from drive. Do i have to reflash it and enable sound somehow? Is there such an option when flashing the drive?
The buzzer i use is a 12v piezo

S0ulA55a551n · 09 February 2022, 12:47

There is a setting to enable speaker sound

xalakibaniou · 09 February 2022, 13:03

What software shoul i use? I only have a USB A to USB A cable and shorted pins according to the photo. gotek drive is sfrc922d

S0ulA55a551n · 09 February 2022, 15:43

Quote:

Originally Posted by xalakibaniou

What software shoul i use? I only have a USB A to USB A cable and shorted pins according to the photo. gotek drive is sfrc922d

All my amiga stuff is in storage but from memory, dont you get to the settings same place you setup what images are in which slots etc ?

Have things moved on since then ? Am I even using flashfloppy?

xalakibaniou · 09 February 2022, 18:40

I am pretty sure the device's firmware is FlashFloppy v3.12a. I have successfully flashed the latest stable version v3.30 though still no luck. I think the piezo buzzer should be 5V and NOT 12V as the one I'm using now. Can someone confirm that 5V is the right one?

jbenam · 09 February 2022, 18:52

Yes, 5V. There are both active and passive speakers. IIRC the one that will work without a transistor is the passive one.

09 February 2022, 12:07	#1
xalakibaniou Registered User Join Date: Oct 2005 Location: Athens Greece Age: 44 Posts: 99	Gotek sound emulation I have gotek drive set up from amigakit couple of years now. It came with oled, rotary encoder and flashfloppy 3.12a firmware. I use it as internal df0 on an A500. I cant get any sound from drive. Do i have to reflash it and enable sound somehow? Is there such an option when flashing the drive? The buzzer i use is a 12v piezo Attached Thumbnails

09 February 2022, 13:03	#3
xalakibaniou Registered User Join Date: Oct 2005 Location: Athens Greece Age: 44 Posts: 99	What software shoul i use? I only have a USB A to USB A cable and shorted pins according to the photo. gotek drive is sfrc922d Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gotek no motor sound help!	Hiddenevil	support.Hardware	3	25 September 2020 16:31
Gotek Emulation	S0ulA55a551n	Retrogaming General Discussion	5	25 October 2019 12:43
I am after the sound mod for the Gotek	spannernick	Hardware mods	10	12 January 2017 20:19
Floppy drive sound vs sound emulation	mark_k	support.WinUAE	4	14 November 2016 11:36
Sound is muffled after boot until change of settings - sound filter emulation issue?	rsn8887	support.WinUAE	1	30 May 2010 20:44

09 February 2022, 12:47	#2
S0ulA55a551n Registered User Join Date: Nov 2010 Location: South Wales Age: 46 Posts: 937	There is a setting to enable speaker sound

09 February 2022, 18:40	#5
xalakibaniou Registered User Join Date: Oct 2005 Location: Athens Greece Age: 44 Posts: 99	I am pretty sure the device's firmware is FlashFloppy v3.12a. I have successfully flashed the latest stable version v3.30 though still no luck. I think the piezo buzzer should be 5V and NOT 12V as the one I'm using now. Can someone confirm that 5V is the right one?

09 February 2022, 18:52	#6
jbenam Italian Amiga Zealot Join Date: Jan 2009 Location: Italy Age: 36 Posts: 1,911	Yes, 5V. There are both active and passive speakers. IIRC the one that will work without a transistor is the passive one.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)