AA3000+ DSP emulation

[trixster]

Thanks for the message.

@wrangler would be the best person to ask, or maybe torsti76 or one of the other guys on the A1K dsp mega thread.

[eXeler0]

Originally Posted by BomberMillz

@Trixter:

OK, I dont know if its any help, or what exactly you need to find out, but I have located a datasheet with the instruction set for the AT&T DSP32C. It appears they are compatible with the 3210 to some degree (same family?).

Would this be any good? What sort of compiler are you using?

If datasheets do the trick, here's the 3207 datasheet, its an "optimized" variant of the 3210, seems to be largely software compatible.

https://www.datasheetarchive.com/pdf...O&term=DSP3210

[BomberMillz]

Originally Posted by eXeler0

If datasheets do the trick, here's the 3207 datasheet, its an "optimized" variant of the 3210, seems to be largely software compatible.

https://www.datasheetarchive.com/pdf...O&term=DSP3210

Unfortunately not. I actually posted the datasheet of the 3210. However, they both just describe the DSP electrical and bus characteristics.


The DSP32C document I mentioned also has the instruction set summary included, which is what I think they are more after.

[eXeler0]

Probably not that helpful, but a nice "specs paper" from Dave Haynie on the "DoubleThink" processor+DSP 3210 card for the A4000.
http://www.devili.iki.fi/mirrors/hay...ocs/medeng.pdf