English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 30 June 2015, 07:29   #1
Ciarf
 
Posts: n/a
Killed my A500. No lights when power on

A500 Rev 3 (rocklobster)

Was working. I plugged in a floppy from an A2000 to replace the broken A500 one. Now no power light, no caps lock lights, no blinks, etc.

Tested the power supply with volt meter. Getting +5, +12, -12. When I plug the power supply into the A500, I get mV reading on the +5 trace on the bottom and about 1V on the +12 trace. So something is draining / sinking the voltage, whatever you call it.

I would appreciate any ideas where to start troubleshooting.
Ordered an untested/probably broken A500 with no power supply for parts, so I can't test right now by swapping parts. Trying to buy another A500 with power supply.

Trying to learn more about 80's electronics, so would like to work on repairing this

Thanks
 
Old 30 June 2015, 09:12   #2
dirkies
Zone Friend

dirkies's Avatar
 
Join Date: Aug 2002
Location: Belgium
Age: 47
Posts: 1,223
Had this too when trying a kickstart switcher. The unit remained absolutely dead when switched on, no lights nor sounds nor hum. Removing this ks switchboard made it alive again. So perhaps take out the ks chip and see what it does.
dirkies is offline  
Old 02 July 2015, 05:32   #3
Ciarf
 
Posts: n/a
Hi. Thanks for the reply. It appears it was the power supply. 312503-01. Converted an old 230W ATX power supply and get the WB screen again. So even though the power supply had the correct voltages being output, it wasn't even enough to power a bare A500. I don't understand power supply internals enough to know what was happening. Definately not going to open it up and play around with it. The internal fuse looked in tact. Nothing else looked burned or bulging. Maybe I'll see if it can power a car light bulb off the +12v.

At least now I might be able to power my Supra Drive. Still testing. Still have to put everything back together. Gotta make a book disk with some drivers somehow.

Thanks again.
 
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted A500 Power Supply (35.7W) manic23 MarketPlace 5 17 April 2013 11:10
Looking for an A500+ power supply JonB MarketPlace 11 10 April 2013 22:41
Which LEDs for Amiga 4000 power/HD lights? edd_jedi Hardware mods 3 06 January 2013 00:59
WTB: A500 power supply or A1200 power supply (USA model) CMA Death Adder MarketPlace 7 01 October 2010 16:10
A500+ Power Connector fool2cool Hardware pics 16 10 December 2007 19:24

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 17:15.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.05933 seconds with 13 queries