26 April 2016, 15:09 | #1 |
Posts: n/a
|
Zorro III fast ram not recognized
I run FS-UAE on a Mac Pro 3,1 with 32 GB RAM and OS X 10.10.5 installed.
In the 2.4.1 version of FS-UAE Zorro III fast RAM assignment worked fine. Now I've tried both 2.6.1 and the 2.7.12dev versions with similar configurations, and I cannot get more than the 8 MB of Zorro II RAM in the emulation. The Zorro III setting is simply ignored. I've tried many permutations of RAM assignment but to no avail. Below is my configuration. Anybody who can help? BR, Christian # FS-UAE configuration saved by FS-UAE Launcher # Last saved: 2015-12-30 13:54:17 [fs-uae] accelerator = 0 accuracy = -1 amiga_model = A4000/040 bsdsocket_library = 1 chip_memory = 2048 cpu = 68040 fast_memory = 8192 fullscreen_mode = fullscreen_window hard_drive_0 = /Volumes/MProd RAID/AMIGA/Hard0 hard_drive_1 = /Volumes/MProd RAID/AMIGA/Hard1 hard_drive_2 = /Volumes/MProd RAID/AMIGA/Hard2 hard_drive_3 = /Volumes/MProd RAID/AMIGA/Hard3 hard_drive_4 = /Volumes/MProd RAID/AMIGA/Hard4 joystick_port_1_mode = nothing kickstart_file = KICK35.rom motherboard_ram = 8192 slow_memory = 0 uaegfx_card = 1 window_height = 1080 window_width = 1650 zorro_iii_memory = 131072 |
26 April 2016, 19:38 | #2 |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Could be a problem allocating enough virtual memory, (or possibly a kickstart problem?).
Please attach fs-uae.log.txt! |
26 April 2016, 19:51 | #3 |
Retro Gamer
Join Date: Jan 2005
Location: Underworld
Age: 51
Posts: 4,058
|
You should not add fast_memory + zorro_iii + motherboard_ram + chip
Kickstart 3.5?! Try 3.1 |
26 April 2016, 21:39 | #4 | |
Posts: n/a
|
Quote:
I have attached the log file. Also I have tried with Kick3.1, no difference. And, as noted before, Zorro III RAM works with FS-UAE 2.4.1. Thanks, Christian |
|
26 April 2016, 21:41 | #5 | |
Posts: n/a
|
Quote:
Christian |
|
26 April 2016, 21:49 | #6 |
Retro Gamer
Join Date: Jan 2005
Location: Underworld
Age: 51
Posts: 4,058
|
Try only 2MB CHIP and 64MB Zorro III with KS3.1. (From what I know, 3.5 was never officially released) with new configuration and only WB disk. Check if you get all RAM once loaded.
|
26 April 2016, 22:16 | #7 | |
Posts: n/a
|
Quote:
While testing I have removed startup-sequence just to make certain no software can interfere. I then type "avail" at the CLI which gives me the numbers. |
|
26 April 2016, 22:47 | #8 |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
The 3.1 kickstart you tested with was for A500/600/2000. You should really use an A4000 v3.1 kickstart! If it still fails with a matching kickstart, I'll take a closer look at the log.
|
26 April 2016, 23:47 | #9 | |
Posts: n/a
|
Quote:
Thank you! Christian |
|
23 December 2017, 19:38 | #10 |
Posts: n/a
|
THIS FIXED MY PROBLEM TOO
Wow - I've had this same problem for ages with the latest FS-UAE, meaning that I was forced into using an old emulator version for a couple of years. Today I stumbled on this thread and it fixed it for me. Hurray! I was using the wrong 3.1 kickstart ROMs all along. I replaced with a genuine A4000 rom image and now my Z3 ram is back on FS UAE. Thank you EAB |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[FYI] FS-UAE only addresses max. 384 MB Zorro III RAM (in some cases) | amigafreak68k | support.FS-UAE | 3 | 28 October 2014 11:06 |
Use of 4MB PCMCIA Fast Flash Memory as Fast RAM in A1200 | nkarytia | support.Hardware | 10 | 16 September 2011 13:37 |
Zorro III not working... :( | DarrenHD | support.Hardware | 19 | 27 January 2011 05:41 |
32-bit FAST RAM vs. ZII FAST RAM | polbit | support.Hardware | 16 | 28 January 2007 20:16 |
Zorro II Card - Zorro III Slot ? | THX1138 | support.Hardware | 4 | 03 May 2003 11:03 |
|
|