20 September 2017, 15:21 | #1 |
Registered User
Join Date: Jun 2016
Location: Adelaide / Australia
Posts: 565
|
CoCo by Unique - no Music on Real hardware
Hiya Folks.
This ones had me stumped for a bit. Coco by Unique has no music and acts differently under WINUAE vs a real A4000 (3.1/060/Paula) Basically the Real Machine, you see the record spin, and it will continue to spin .. foreeeevvvveerrrr, and there's no music. I play the same demo under WINUAE emulation using an A1200 setup, and when it starts, the record spins, music starts and after a few moments, the scene changes, the A4000 seems to know something is wrong and won't move to the next scene. Snoopdos appears to load everything so it doesn't appear to be a missing library as such. There's a second demo that did this as well but i can't recall which one, i think it wasn't in English and had a cartoony look to it. Any suggestions on the music that will hopefully keep the demo moving to the next scene if running correctly? |
20 September 2017, 17:42 | #2 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,337
|
Does your A1200 WinUAE setup have an emulated 060 and the same amount of RAM as your real A4000?
Could be a bug when running this on an 060 |
20 September 2017, 18:04 | #3 |
Registered User
Join Date: Oct 2012
Location: Italy
Age: 49
Posts: 2,942
|
Absence of music happens also to me under emulation, with a lot of demos
I usually fix the problem switching to 020 emulation, instead of the default 040 i use |
20 September 2017, 18:05 | #4 |
Registered User
Join Date: Jun 2016
Location: Adelaide / Australia
Posts: 565
|
Nah the UAE settings simulate my real A1200 i have so it makes it quick and easy to setup and transfer, hmm, i wonder why i didn't think of that though, i should try it on my real A1200 Yeah maybe just not 060 compat... i think on poet i saw someone else complain about the same issue but there was no response, just praise, i assume the prasiers were all UAE Users
|
20 September 2017, 21:55 | #5 |
Registered User
Join Date: Feb 2010
Location: Espoo / Finland
Posts: 818
|
|
21 September 2017, 04:50 | #6 |
Registered User
Join Date: Jun 2016
Location: Adelaide / Australia
Posts: 565
|
Very true - and yes it does work on my A1200 with an ACA030, and dies on my 060/4000 which is loosely suggested will happen in the .NFO.
Sorry for wasting your time, and i never like critiquing any demos as i love them all for their own merits and the fact you guys still work hard on them. I think i got used to the fact that most demos need a powerhouse machine to run and i gotget some some demos are a throwback to the OCS era |
18 October 2017, 07:47 | #7 |
Banned
Join Date: Sep 2011
Location: Cardiff, UK
Age: 51
Posts: 2,871
|
I have this demo, it runs fine on a plain A500. Why would you need an A4000 to run it?
|
18 October 2017, 09:18 | #8 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,337
|
Erm because that's all you have?
|
18 October 2017, 10:27 | #9 | ||
move.l #$c0ff33,throat
Join Date: Dec 2005
Location: Berlin/Joymoney
Posts: 6,863
|
Quote:
Quote:
Same problem I mentioned above, VBR is relocated to fast memory (SetPatch does that) and a lot of older demos do not handle this correctly. |
||
18 October 2017, 11:05 | #10 |
Registered User
Join Date: Feb 2010
Location: Espoo / Finland
Posts: 818
|
|
18 October 2017, 11:16 | #11 |
move.l #$c0ff33,throat
Join Date: Dec 2005
Location: Berlin/Joymoney
Posts: 6,863
|
Yeah, that's complete nonsense of course!
|
19 October 2017, 04:09 | #12 |
Registered User
Join Date: Jun 2016
Location: Adelaide / Australia
Posts: 565
|
Geez guys, no need to be like that ... if i'm too 'Lame' for you, then just don't answer...
|
19 October 2017, 04:11 | #13 | |
Registered User
Join Date: Jun 2016
Location: Adelaide / Australia
Posts: 565
|
Quote:
I usually install and test everything in that environment and them move it to the A1200 so if one machine goes, i have another and no loss of data, that's the way i do my hobby. I have a 600 and a 500 but they don't get much time with my love.... |
|
19 October 2017, 07:30 | #14 |
move.l #$c0ff33,throat
Join Date: Dec 2005
Location: Berlin/Joymoney
Posts: 6,863
|
I have told you exactly what to do to fix this problem and have corrected a completely wrong assumption from your side! This has nothing to do with being "too lame" or not, what you claimed was simply wrong!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Netplay on real Amiga hardware? | lesta_smsc | support.Hardware | 3 | 04 December 2018 08:03 |
Help us test our new game on real hardware | alpine9000 | Retrogaming General Discussion | 26 | 08 June 2016 09:21 |
PPC68k20 did anyone test this on real hardware? | Michael Sykes | Amiga scene | 0 | 21 January 2016 00:07 |
ALWAYS test your code on real hardware!! | h0ffman | Coders. General | 32 | 16 July 2015 21:02 |
I should CoCo | Antiriad | Retrogaming General Discussion | 22 | 19 October 2002 21:37 |
|
|