Bug??: Sound Left/Right flipped for A1200 and setting is not saveable

rsn8887 · 02 November 2006, 20:13

Hi, I think I found a miniscule bug in WinUAE 1.3.2:

In A500 Config, the speaker left/right setting is fine (tested with SWIV).
But in A1200 Config, the speaker left/right seems to be reversed (tested with poing on workbench for example).

E.g. I have to enable "swap left/right for Paula only" ONLY when using a standard A1200 config to get the right result.

Regarding the same topic, the "swap left/right" setting on the sound panel does not get saved into my config. It resets back to normal every time I load a config. Dunno if this is a feature or a bug though...

Toni Wilen · 02 November 2006, 20:29

Quote:

Originally Posted by rsn8887

tested with poing on workbench for example

Use something that directly accesses audio hardware. Programs that use audio.device can get any channel (if they don't specifically ask for correct channel)

Toni Wilen · 03 November 2006, 15:41

Quote:

Originally Posted by rsn8887

Regarding the same topic, the "swap left/right" setting on the sound panel does not get saved into my config. It resets back to normal every time I load a config. Dunno if this is a feature or a bug though...

Hmm.. Stereo swap setting was never saved to config (or loaded from it..)

Looks like I forgot to implement it, will be fixed in next release

rsn8887 · 03 November 2006, 17:40

Cool, thanks!

I will re-check the audio with something that does not use audio.device. I bet it will be fine, but haven't checked again yet. Somehow poing made sense to me though when I first checked. This is since the ball-hitting-block sound used to be on the right speaker on my miggy... but in UAE it came out of the left speaker.

02 November 2006, 20:13	#1
rsn8887 Registered User Join Date: Oct 2006 Location: USA Posts: 1,058	Bug??: Sound Left/Right flipped for A1200 and setting is not saveable Hi, I think I found a miniscule bug in WinUAE 1.3.2: In A500 Config, the speaker left/right setting is fine (tested with SWIV). But in A1200 Config, the speaker left/right seems to be reversed (tested with poing on workbench for example). E.g. I have to enable "swap left/right for Paula only" ONLY when using a standard A1200 config to get the right result. Regarding the same topic, the "swap left/right" setting on the sound panel does not get saved into my config. It resets back to normal every time I load a config. Dunno if this is a feature or a bug though...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting up graphics + sound with mediator	Turran	support.Hardware	13	11 March 2015 03:14
WinUAE v2.5.0 - possible bug with Hardware configs, ECS Agnus chipset setting	SedrynTyros	support.WinUAE	1	06 December 2012 21:29
Which sound frequency setting is closest to original Amiga	rsn8887	support.WinUAE	19	03 December 2011 19:36
Can sound buffer setting have a very subtle effect?	rsn8887	support.WinUAE	0	22 April 2011 17:06
Left sound channel on A1200 gone	8bitbubsy	support.Hardware	61	06 October 2009 00:57

03 November 2006, 17:40	#4
rsn8887 Registered User Join Date: Oct 2006 Location: USA Posts: 1,058	Cool, thanks! I will re-check the audio with something that does not use audio.device. I bet it will be fine, but haven't checked again yet. Somehow poing made sense to me though when I first checked. This is since the ball-hitting-block sound used to be on the right speaker on my miggy... but in UAE it came out of the left speaker.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)