Volume CDROM on AmigaOS 3.9

DerekAutista123 · 04 March 2016, 22:34

So, i inserted the cdrom volume, but, i need cdrom:emergency-boot/c/assign

HELP!! Where's cdrom:emergency-boot/c/assign??

AMIGASYSTEM · 05 March 2016, 01:45

Ciao DerekAutista and welcome to the forum, if I understand your problem, from my attached screenshot you can see the paths, what you need the emergency-boot/c/assign?

To install OS3.9 on WinUAE all you need are only the Workbench 3.1 floppy, in the first part of [ Show youtube player ] you can view the procedure.

DerekAutista123 · 05 March 2016, 02:51

AmigaSYS 2 AFA Download link?

AMIGASYSTEM · 05 March 2016, 03:10

On AfA_OS (no AmigaSYS AfA) HERE you can find the most recent version HERE instead the official website, is a great way my favorite but unfortunately its author seems to have abandoned project, [ Show youtube player ] it is my personal AfA OS, there is also still [ Show youtube player ] which it is similar but always updated.

DerekAutista123 · 05 March 2016, 03:36

I downloaded AFA OS, but, where's the video tutorial?

AMIGASYSTEM · 05 March 2016, 09:45

You do not need a tutorial, to install AfA just do some simple things and then configure it to best. i THIS link you can download AfAWB_1.3.7z which contains info about installing AfA_OS and a Hard File with all the necessary files. I enclose the relevant steps described in the information that you find in AfAWB_1.3, after installation update system with version AFA OS 4.7 reviewed in above.

- Requires a freshly installed or untampered with OS3.9BB4.
Built for 020+Fpu.
- Quarktex is used for 3D support so QuarkTex.alib needs to be installed in WinUAE plugins.

- Ensure you have plenty of RAM and RTG Graphics Card RAM and can access these files inside WinUAE.

- Boot your OS3.9BB4 partition along with AfAWB1.3InstallFiles.vhd (Add Hardfile).

- RXNIL needs to be installed in Rexxc, run rx-patcher.rexx - hidden rx-patcher dir in AfAWBInstallfiles:System/GH_Browser/
Or from the supplied rx-patcher.lha

- In the OS3.9BB4 partition create Disabled and Enabled drawers in WBStartup.
Move AmiDock and THE to Disabled everything else to Enabled.
Delete InfoPNG in Devs/Datatypes
Move 8SVX from Devs/Datatypes to Storage/Datatypes.
Delete NETPAR in Devs/Dosdrivers.

- Less Important (Messy):
Ensure only gb and usa2 are in Devs/KeyMaps move rest to Storage/KeyMaps.
Ensure only Generic is in Devs/Printers move rest to Storage/Printers.
All Monitors should be in Storage.

- Start DirOpus4 from AfAWBInstallFiles. (Use at least a 640x480 screenmode)
Select all files in AfAWBInstallFiles: and copy to SYS: (overwrite all)

I'll add this:

- Command "C: Morelibspace and C: AfA_OS_Loader 'must stay on top of the Startup-Sequence before SetPatch command

- Command C: AfA_OS_Loader after AddDatatypes command

- Eliminate programs like PowerIcons and the like

04 March 2016, 22:34	#1
DerekAutista123 Banned Join Date: Mar 2016 Location: GoAnimate City Age: 19 Posts: 39	Volume CDROM on AmigaOS 3.9 So, i inserted the cdrom volume, but, i need cdrom:emergency-boot/c/assign HELP!! Where's cdrom:emergency-boot/c/assign?? Last edited by DerekAutista123; 04 March 2016 at 22:35. Reason: Helping

05 March 2016, 01:45	#2
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,248	Ciao DerekAutista and welcome to the forum, if I understand your problem, from my attached screenshot you can see the paths, what you need the emergency-boot/c/assign? To install OS3.9 on WinUAE all you need are only the Workbench 3.1 floppy, in the first part of [ Show youtube player ] you can view the procedure. Last edited by AMIGASYSTEM; 18 January 2017 at 09:39.

05 March 2016, 02:51	#3
DerekAutista123 Banned Join Date: Mar 2016 Location: GoAnimate City Age: 19 Posts: 39	Link of amigasys2 afa? AmigaSYS 2 AFA Download link?

05 March 2016, 03:36	#5
DerekAutista123 Banned Join Date: Mar 2016 Location: GoAnimate City Age: 19 Posts: 39	Tutorial I downloaded AFA OS, but, where's the video tutorial?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Internal CDRom v Laptop CDRom on Amiga 1200	Havie	Hardware mods	2	11 October 2015 20:49
CD audio volume change is not applied if Paula volume is changed, too	thomas	support.WinUAE	1	21 March 2014 16:50
cd volume (iso)	turrican3	support.WinUAE	1	01 October 2012 16:46
IDE CDROM / Buffered IDE / AmigaOS 3.9	MrGimper	support.Hardware	2	18 September 2010 12:53
RAD Volume	Tony Landais	Coders. General	2	12 May 2003 10:15

05 March 2016, 03:10	#4
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,248	On AfA_OS (no AmigaSYS AfA) HERE you can find the most recent version HERE instead the official website, is a great way my favorite but unfortunately its author seems to have abandoned project, [ Show youtube player ] it is my personal AfA OS, there is also still [ Show youtube player ] which it is similar but always updated.

05 March 2016, 09:45	#6
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,248	You do not need a tutorial, to install AfA just do some simple things and then configure it to best. i THIS link you can download AfAWB_1.3.7z which contains info about installing AfA_OS and a Hard File with all the necessary files. I enclose the relevant steps described in the information that you find in AfAWB_1.3, after installation update system with version AFA OS 4.7 reviewed in above. - Requires a freshly installed or untampered with OS3.9BB4. Built for 020+Fpu. - Quarktex is used for 3D support so QuarkTex.alib needs to be installed in WinUAE plugins. - Ensure you have plenty of RAM and RTG Graphics Card RAM and can access these files inside WinUAE. - Boot your OS3.9BB4 partition along with AfAWB1.3InstallFiles.vhd (Add Hardfile). - RXNIL needs to be installed in Rexxc, run rx-patcher.rexx - hidden rx-patcher dir in AfAWBInstallfiles:System/GH_Browser/ Or from the supplied rx-patcher.lha - In the OS3.9BB4 partition create Disabled and Enabled drawers in WBStartup. Move AmiDock and THE to Disabled everything else to Enabled. Delete InfoPNG in Devs/Datatypes Move 8SVX from Devs/Datatypes to Storage/Datatypes. Delete NETPAR in Devs/Dosdrivers. - Less Important (Messy): Ensure only gb and usa2 are in Devs/KeyMaps move rest to Storage/KeyMaps. Ensure only Generic is in Devs/Printers move rest to Storage/Printers. All Monitors should be in Storage. - Start DirOpus4 from AfAWBInstallFiles. (Use at least a 640x480 screenmode) Select all files in AfAWBInstallFiles: and copy to SYS: (overwrite all) I'll add this: - Command "C: Morelibspace and C: AfA_OS_Loader 'must stay on top of the Startup-Sequence before SetPatch command - Command C: AfA_OS_Loader after AddDatatypes command - Eliminate programs like PowerIcons and the like

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)