06 January 2018, 19:38 | #341 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
http://www.winuae.net/files/b/winuae_3600b17.7z
http://www.winuae.net/files/b/winuae64_3600b17.7z Beta 17: - Added Profex HD3300 emulation and boot ROM. - Fixed rounding issue in D3D11 mode screen position calculation. (Single pixel offset in some situations) - 68040+ "cycle exact" could have appear hung if all running code and data fit in caches. - Geometry file parsing memory free bug fix. - Interlace artifact removal last flickering line fixed (b1) - Allow JIT direct in CSPPC configuration. This disables CSPPC Map ROM address mapping completely. - D3D11 threaded Present() calls removed, it is not compatible with some systems. (Caused blank screens when switching modes) - Re-initialize D3D11 display mode if ResizeBuffers() return an error instead of showing blank screen. - End of chip ram didn't have safety barrier if chip ram size was less than 2M. Unaligned long or word access from the very end of chip ram could have caused crash. Profex HD3300: - Yet another basic OMTI based HD controller. - "omti55.device 22.0 (17-Apr-1989) (c) 1988,1989 by Thomas Rudloff for Intelligent Memory Frankfurt, W. Germany" |
06 January 2018, 19:42 | #342 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
...off to test |
06 January 2018, 19:43 | #343 |
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
Thanks Toni for your continued support Your amount of releases is and your response times are impressive. Will start testing Beta 17. 3.6 Final must be around the corner...
|
06 January 2018, 19:59 | #344 |
Banned
Join Date: Aug 2005
Location: London / Sydney
Age: 47
Posts: 20,420
|
Toni Wilen; the man who *never* sleeps and is always improving WinUAE...
I don't know what we would do without him if I'm honest??? It will be a very sad day when he decides to "throw in the towel". He's an Amiga GOD!!! ...and deserves our support; donate whenever you can people; as I do |
06 January 2018, 20:39 | #345 |
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
For a full screen experience I'm using the Full-window option nowadays. Something very wrong is happening in Fullscreen mode here though.
1. Start config (Windowed) 2. Change to Fullscreen from inside WinUAE 3. Select 1920x1080 (32bit) in Screenmode Prefs (Test and/or Use) 4. Screen is flickering like a mad man Flickering non-existent in Full-window mode. Went back to Beta 13, issue seen there too, didn't go back any further. Let me know if more information is needed. |
06 January 2018, 21:21 | #346 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Does it really require all steps? This looks too complex
|
06 January 2018, 21:50 | #347 |
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
Heh, no. With attached config and saved screenmode.prefs flickering is instant
As a sidenote. I remember reading about the following, but not sure. When pressing F12 from fullscreen mode, the display closes and the GUI shows... (it's not on top of the display) |
06 January 2018, 22:29 | #348 | ||
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Quote:
Whole screen flickers? Only modified parts flicker? Does it happen in other resolutions/screen depths? If you enable misc panel RTG on screen display, does OSD also flicker? Quote:
|
||
06 January 2018, 22:46 | #349 | |||
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
Quote:
Quote:
Quote:
|
|||
07 January 2018, 03:43 | #350 |
Moon 1969 = amiga 1985
Join Date: Apr 2007
Location: belgium
Age: 48
Posts: 3,913
|
is it normal that with dx11 and low latency setup, the sound is stuttering ?
If yes, forget about it, but if you need a more complet report, tell me. |
07 January 2018, 03:45 | #351 |
m68k all the way
Join Date: Aug 2011
Location: Koalaland
Posts: 523
|
|
07 January 2018, 12:08 | #352 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
It does not guarantee anything
Quote:
Redownload winuae.7z and attach winuaelog.txt again, it may also fix it. What does Display panel refresh rate box show? Does it work if you select any other option than "default"? |
|
07 January 2018, 12:53 | #353 | |
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
Quote:
Results when choosing other than default (Host Display settings) are very random, when choosing 50Hz PAL when starting emulation the figure stays at 49/50. Changing the settings on-the-fly doesn't result in any change. Starting emulation with any other settings (59, 60, 75) keeps the figure on 59/60/61. When selecting any other option at Refresh rate (RTG board settings) it keeps displaying this figure (59/60/61) except when choosing 70 or 75, then the figures stays at 49/50 (still same behaviour though). |
|
07 January 2018, 13:40 | #354 | ||
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Quote:
Quote:
|
||
07 January 2018, 13:46 | #355 |
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
Flickering gone in Fullscreen mode!
|
07 January 2018, 14:26 | #356 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Finally It really was interlaced mode that was accidentally chosen, it only happened if display driver sent screen mode list in specific order.
|
12 January 2018, 18:14 | #357 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
http://www.winuae.net/files/b/winuae_3600b18.7z
http://www.winuae.net/files/b/winuae64_3600b18.7z Beat 18: (Final version: next week. possibly.) - Added real CHS-only IDE drive HDF imaging support that works with some (single? all?) USB adapters that don't natively support CHS only drives (Drive appears as having zero byte capacity in Windows Disk Manager and SCSI READ CAPACITY returns FFFFFFFF00000200) Imager first asks for drive's CHS geometry and then uses standard Direct SCSI mode READ (10) to read correct blocks. This works as long as adapter blindly copies SCSI LBA fields to ATA CHS/LBA registers internally. - Default D3D11 fullscreen refresh rate may have incorrectly chosen native interlaced mode if it was available. - D3D11 no buffer fullscreen vsync does not update as fast as possible anymore. - Restored norawinput keyboard and mouse modes (-norawinput_all disables all, -norawinput_keyboard and -norawinput_mouse to only disable mouse or keyboard rawinput mode). They were removed in 3.3 but apparently RDP does not support rawinput keyboard. - BCD instruction V-flag fix, 68020+ BCD instructions don't do undocumented V-flag modifications, only 68000/010, previously it was only done if 68040+. - Notification icon handling updated, previous Windows 7 workaround removed. - Added Misc panel option to show WinUAE in Windows shutdown/logoff screen (Vista or newer) if emulation session is active. |
12 January 2018, 19:47 | #358 |
Registered User
Join Date: Oct 2017
Location: Amsterdam
Posts: 231
|
|
12 January 2018, 21:05 | #359 |
Registered User
Join Date: Aug 2004
Location:
Posts: 3,335
|
|
13 January 2018, 14:06 | #360 |
Registered User
Join Date: Apr 2008
Location: France
Posts: 28
|
Toni, can you activate the string for translation ?
Thank you |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE Development. Better than the real thing...yet? | antiriad76 | support.WinUAE | 6 | 18 May 2017 14:25 |
|
|