14 January 2014, 20:11 | #21 |
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
Quick checking some demos on WinUAE 2710b2
--------------------------------------------- Supplex-HiFreaks (seems its broken again) TEK-Rampage (it reset after some time ... illegal instruction !!!) Silents-Maximum Velocity (same ... illegal instruction !!!) |
14 January 2014, 20:36 | #22 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
Quote:
EDIT: It is caused by "- Modified interrupt delays, handle situation where (broken)..." fix in b1. Last edited by Toni Wilen; 14 January 2014 at 20:53. |
|
14 January 2014, 20:58 | #23 | |
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
It seems in b1 Silents-Maximum Velocity works, but other 2 dont !!!
p.s. Silents-Maximum Velocity also works in last test winuae 2014.01.06. ... but not in new b2. Quote:
EDIT: Yes, I found it ... the last winuae test version (before beta1) where everything from "Already fixed" category still works fine is -> WinUAE 2.7.1 (Public Beta 0, 2013.12.30) from 2013.12.31 22:00 (Note: In case somebody missed this version I still have it.) p.s. Probably after some major changes is done in WinUAE it will be enough only to test/check those demos from "Already fixed" category on the 1st page from "Problematic demos" thread ... and they really are not many ... (a little shame that it looks as nobody is interested or didnt noticed any change by now ... but for those who would like to have an accurate amiga emulation, unfortunately without your help too it will be impossible to achieve.) Last edited by amilo3438; 15 January 2014 at 02:31. |
|
14 January 2014, 23:25 | #24 |
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
Also, on demo ANARCHY-Digital Innovation ... on one part got message (pic.1)!
Scoopex-Blerkenwiegel ... it looks/behaves a little different on b2 !!! (b2=pic.2, b1=pic.3) UPFRONT-PlasticPassion ... it looks a little different in overscan resolution !!! (b2=pic.4, b1=pic.5) p.s. And other demos from "Already fixed" category seems to work fine. Last edited by amilo3438; 15 January 2014 at 00:32. |
15 January 2014, 15:12 | #25 |
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
VD-AbsoluteInebriation ... some glitches after rotation of word VIRTUAL (pic.1 - after it finish) and then after Fairlight part loading (pic.2) ... also it stops working after a while -> Exception 3 (pic.3) !!!
p.s. Also on this new b2 and older versions some white dots appears below pyramide (pic.4)!!! Upfront-CoolFridge ... lot of glitches on menu appears in b2 (after moving mouse or after exit any of demo)!!! Last edited by amilo3438; 15 January 2014 at 15:21. |
15 January 2014, 16:00 | #26 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
No need to do any more tests because until it gets fixed. Please stop
Clipboard01.jpg = not emulation problem. It happens on real hardware too, I think it was OCS-only problem. EDIT: winuae.zip updated, should fix most problems (Blerkenwiegel not yet fixed) Last edited by Toni Wilen; 15 January 2014 at 16:28. |
15 January 2014, 16:30 | #27 |
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
|
15 January 2014, 18:01 | #28 | ||
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
Quote:
Quote:
Scoopex-Blerkenwiegel ... still same (as you already mentioned) Supplex-HiFreaks ... still same p.s. Also on Silents-Maximum Velocity have noticed following: When running part (see pic.1 below) and after presing LMB it glitches and stabilize after (it seems to happens also on older versions of WinUAE but unknown does it happens on a real Amiga?!) |
||
15 January 2014, 19:11 | #29 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
Quote:
(HiFreaks working again) |
|
15 January 2014, 19:45 | #30 |
Amiga 500 User
Join Date: Jun 2013
Location: EU
Posts: 1,504
|
|
16 January 2014, 17:14 | #31 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
http://www.winuae.net/files/b/winuae_2710b3.zip
Beta 3: - Sprites near left border had strange corruption (b1) - "toscr_nbits > 16" error in some situations (b1) - "Modified interrupt delays" b1 change was bad, sometimes interrupt request was kept active causing spurious interrupts (which caused crashes). - New autoresolution selection was not loaded correctly from config file. - Blitter final D write don't increase "nasty" count. (Which makes sense, blit is already finished, blitbusy bit was cleared 2 cycles ago) - Removed most BPLxDAT related hacks, they become obsolete after b2 BPLCON1 update (it also changed how data gets moved to shift registers). May introduce new glitches and if it does, it needs correct emulation updates, not hacks. |
18 January 2014, 12:11 | #32 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
|
18 January 2014, 15:24 | #33 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
http://www.winuae.net/files/b/winuae_2710b4.zip
Beta 4: - More than one horizontal DDFSTRT-DDFSTOP window is now accurately emulated without requiring any hacks. Random garbage between display windows is also gone. (Subtle Shades / Nuance) - Removed some more obsolete variables from display emulation. - Saigon Megademo fix got accidentally broken in b2. - 260b17 "strange right edge overscan display shift" optional hack removed, new delay/shift register behavior creates identical output automatically simply by reseting delay counter (hpos counter) at the end of scanline. NOTE: Some programs with large overscan can now have small graphics corruption in right border (gap in graphics), it is not a bug, it is accurate emulation. (For example Back in Bizness / 2000AD) - Some OCS only programs may now have graphics corruption in ECS mode (if bitplane DMA crosses scanlines), this is also not a bug, real hardware would show even worse corruption. Someday this will be more accurately emulated. - Agnus vpos counter increase delayed by 1 cycle. Fixes Hit the Road / Flash Production "Floffy2" part. - Keyboard leds as power/floppy/etc indicators are now properly restored back to original state when keyboard input is not active, changing led config on the fly also works now. - Exiting GUI with close button or ALT-F4 didn't save GUI position. |
23 January 2014, 19:43 | #34 |
Registered User
Join Date: Feb 2012
Location: #DrainTheSwamp
Posts: 4,545
|
look at the picture:
winuae 271 b4 and also in 270 final. A500 Quickstart 512C / 512F OCS or ECS Full kickstart 1.3 A500 WORKBENCH 1.3.3 version 34.34 disable cycle exact and choose "fastest possible" no corruption if you choose "approximate a500 ..." and cycle exact still disabled. |
23 January 2014, 19:47 | #35 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
Enable immediate blitter, WB disk included C:FastFonts is simply broken. (and wrong thread)
|
23 January 2014, 19:50 | #36 |
Registered User
Join Date: Feb 2012
Location: #DrainTheSwamp
Posts: 4,545
|
oh damn, sorry then. "immedite blitter" fixed it
i was convinced it was correct thread |
28 January 2014, 21:54 | #37 |
Better than the Original
Join Date: May 2008
Location: Cairo, Egypt
Posts: 152
|
Hi Toni,
"http://www.winuae.net/files/b/winuae.zip" dated 26/1/2014 emulation halts on Test Drive II. Beta 4 works great. I do not know whether it is right to send reports about non-official releases, but I report this problem to prevent it from happening in beta 5. Please investigate. PS: I have attached my config. |
29 January 2014, 17:38 | #38 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
|
30 January 2014, 08:50 | #39 |
Better than the Original
Join Date: May 2008
Location: Cairo, Egypt
Posts: 152
|
|
02 February 2014, 17:04 | #40 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,507
|
Do not use this version, too borken, skip to b6.
http://www.winuae.net/files/b/winuae_2710b5.zip Beta 5: - "Strange right edge overscan display shift" adjusted, in some situations it was visible when it shouldn't have been. Looks also correct in NTSC mode now (Sawtooth pattern caused by alternating line lengths) - OCS Agnus requires one cycle between sprite DMA and bitplane DMA, ECS Agnus can have both cycles back to back. This means OCS Agnus will only fetch first sprite word (practically making sprite useless) where ECS Agnus can fetch both. - Rarely during heavy interrupt activity in cycle-exact mode some delayed interrupt register set or clear operation may have been lost causing possible spurious interrupt. - lea (d8,An,Xn) prefetch is last operation, not idle cycle. - 68020 CE mode CAS instruction prefetch was broken. - When UAE boot ROM is enabled, add fake autoconfig board (configdev) that has same board address and size as boot ROM. Allows MMU utilities (mmu libraries, enforcer etc..) to mark boot ROM as valid address space without extra command line parameters. - Partially rewritten horizontal Agnus bitplane state machine. Can (as usual) break something.. - When BPLCON1 matches, only copy enabled planes to shift registers. (Back In 90 / Samplers) - Power led didn't turn off after soft reset. - Added sprite-only linetoscr routines, bordersprites and HAM do not mix well. (Satyanarayanan / Scoopex) - AGA and 64-bit fetch modes: last 16 or so pixels were not flushed to display, depending on BPLCON1 value. (Satyanarayanan / Scoopex) - New (still WIP) modern native library interface merged from FS-UAE. - Added LSI 53C895A SCSI chip emulation from QEMU. Lots of changes to make it 53C710 compatible (53C720 and later have multiple registers changes but SCRIPTS code is fortunately backwards compatible) A4091 and A4000T NCR driver now "work", chip init works, returns timeout error (no device connected) when it tries to detect SCSI devices. Do not connect any drives, it does not work yet. - pdk compressed (or dsq) files always unpacked to Amiga DD floppy size. - Keyboard leds lost sync in some situations. Last edited by Toni Wilen; 02 February 2014 at 20:21. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE 2.6.0 beta series | Toni Wilen | support.WinUAE | 271 | 14 May 2013 16:51 |
WinUAE 2.5.1 beta series | Toni Wilen | support.WinUAE | 69 | 22 December 2012 10:22 |
WinUAE 2.3.3 beta series | Toni Wilen | support.WinUAE | 124 | 17 September 2011 15:48 |
WinUAE 1.6.1 beta series | Toni Wilen | support.WinUAE | 54 | 18 June 2009 11:05 |
WinUAE 1.5.1 beta series | Toni Wilen | support.WinUAE | 242 | 12 August 2008 12:42 |
|
|