help installing ClassicWB at minimig

07 June 2011, 15:18

I got a minimig with 4mb and the arm controller. I have tried to install ClassiwWB without success. What I did is, install the clw through winuae and then transfer the hdf file back to minimig. unfortunately the minimig refuse to boot!

I'd really appreciate any help, I'd love to have classic wb at my minimg running

mfilos · 07 June 2011, 16:52

I recommend doing the following:
- Create an ClassicWB installation as you want it
- Create an empty hdf file (DH0) from WinUAE and then copy it to Minimig
- Mount "Install3.1" floppy and boot from it
- Via HDToolBox initialize the hardfile, partition it and format it (name it something like Minimig)
- Transfer the .hdf file from Minimig to PC
- Open ClassicWB Configuration with your ready ClassicWB installation and ADD the Minimig file (Caution: if your ClassicWB installation is on DH0, change the drive to something else like SDH0)
- Once you're on ClassicWB and you see normaly the Minimig harddrive open a CLI and give:
1> copy SDH0: DH0: ALL CLONE

...and wait for the copy to complete

Normally after that... your HDF file will work just fine on Minimig

(At least this was the procedure I used for my Chameleon and ClassicWB 68k).

07 June 2011, 17:16

wow!

thank you mfilos! I will try that in a few hours and report back.

07 June 2011, 23:30

worked like a charm!!!

thank you!

mfilos · 08 June 2011, 07:32

Awesome

Glad it worked for ya mate.

07 June 2011, 15:18	#1
xalia Posts: n/a	help installing ClassicWB at minimig I got a minimig with 4mb and the arm controller. I have tried to install ClassiwWB without success. What I did is, install the clw through winuae and then transfer the hdf file back to minimig. unfortunately the minimig refuse to boot! I'd really appreciate any help, I'd love to have classic wb at my minimg running

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installing ClassicWB?	mips	support.FS-UAE	12	24 March 2014 07:07
Installing ClassicWB on a CF card	Akiko	project.ClassicWB	9	03 April 2011 10:40
Installing ClassicWB without a PC	Cammy	project.ClassicWB	12	26 February 2010 20:39
Trouble Installing ClassicWB	Tiddlypeeps	project.ClassicWB	11	22 January 2010 23:06
Help Installing ClassicWB Using WinUAE	Tempest 2084	project.ClassicWB	24	18 June 2009 20:41

07 June 2011, 16:52	#2
mfilos Paranoid Amigoid Join Date: Mar 2008 Location: Athens/Greece Age: 45 Posts: 1,978	I recommend doing the following: - Create an ClassicWB installation as you want it - Create an empty hdf file (DH0) from WinUAE and then copy it to Minimig - Mount "Install3.1" floppy and boot from it - Via HDToolBox initialize the hardfile, partition it and format it (name it something like Minimig) - Transfer the .hdf file from Minimig to PC - Open ClassicWB Configuration with your ready ClassicWB installation and ADD the Minimig file (Caution: if your ClassicWB installation is on DH0, change the drive to something else like SDH0) - Once you're on ClassicWB and you see normaly the Minimig harddrive open a CLI and give: 1> copy SDH0: DH0: ALL CLONE ...and wait for the copy to complete Normally after that... your HDF file will work just fine on Minimig (At least this was the procedure I used for my Chameleon and ClassicWB 68k).

07 June 2011, 17:16	#3
xalia Posts: n/a	wow! thank you mfilos! I will try that in a few hours and report back.

07 June 2011, 23:30	#4
xalia Posts: n/a	worked like a charm!!! thank you!

08 June 2011, 07:32	#5
mfilos Paranoid Amigoid Join Date: Mar 2008 Location: Athens/Greece Age: 45 Posts: 1,978	Awesome Glad it worked for ya mate.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)