Timing Issue? maybe? with 1d.4 and 030 Blizzard?

BarrySWE · 07 November 2005, 11:11

I have read aout issuie with 040 and 060 , but my 1d.4 amiga suddenly gurus and i have a blizzard 1230 in it...
can it be the timing issuie with this 1230 to?

but i thoug the "escom" "amigatechnoligy" or what my motherboard is was working with any accelerator because the fixed the timing issue? on these 1d.4 motherboards..

keropi · 07 November 2005, 11:26

I used to had a mtec030/28, a p5 1260 and now, a dce bppc... I have an Escom 1d4 mobo, but never had any issues with timing... even now with a zorroII busboard+grex all is well... I think there is something else wrong, perhaps the psu is not enough?

BarrySWE · 07 November 2005, 12:45

I'm installing boingbag 1 and 2 now , maybe it's something buggy with the os..
I had to manually copy the installer from os 3.9 cd..
because the old os 3.1 installer was the one in the C: when uppgrading form 3.1 , why didn't os 3.9 install it over?

and i have updated some old os 3.1 programs to..

=)

Seems lika PowerSnap not working to well on OS 3.9..
Gets "yellow gurus with it"

keropi · 07 November 2005, 12:58

Omega Project's Sound Enhancer : where di u grab that from???

BarrySWE · 07 November 2005, 13:09

http://gurumeditation.se/

I got the last one ;-)

ant512 · 07 November 2005, 20:34

You won't experience the bus timing fault with an 030 accelerator.

Unknown_K · 08 November 2005, 01:47

My 030/50 runds fine on the 1d4 revision board. I do have problems with the SCSI addon for that board (works once out of a dozen boots with no scsi devices attached), and think it might be do to board revision.

Too lazy so far to do the board upgrade (and worry about screwing it up, 1200's are not cheap to find in the US).

07 November 2005, 11:11	#1
BarrySWE Zone Friend Join Date: Sep 2005 Location: Sweden Age: 46 Posts: 404	Timing Issue? maybe? with 1d.4 and 030 Blizzard? I have read aout issuie with 040 and 060 , but my 1d.4 amiga suddenly gurus and i have a blizzard 1230 in it... can it be the timing issuie with this 1230 to? but i thoug the "escom" "amigatechnoligy" or what my motherboard is was working with any accelerator because the fixed the timing issue? on these 1d.4 motherboards..

07 November 2005, 12:45	#3
BarrySWE Zone Friend Join Date: Sep 2005 Location: Sweden Age: 46 Posts: 404	I'm installing boingbag 1 and 2 now , maybe it's something buggy with the os.. I had to manually copy the installer from os 3.9 cd.. because the old os 3.1 installer was the one in the C: when uppgrading form 3.1 , why didn't os 3.9 install it over? and i have updated some old os 3.1 programs to.. =) Seems lika PowerSnap not working to well on OS 3.9.. Gets "yellow gurus with it" Last edited by BarrySWE; 07 November 2005 at 12:56.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blizzard 1230 IV Timing Fix Required?	manic23	support.Hardware	16	12 August 2013 05:49
Blizzard 030 trouble.	voyager	support.Hardware	7	18 June 2013 19:49
Problems with Blizzard MK-IV 030	frikilokooo	support.Hardware	2	05 February 2012 22:48
blizzard 030 mhz	AliasXZ	support.Hardware	1	18 February 2008 12:47
Please help: blizzard mk-IV '030 problem	magnox	support.Hardware	1	04 March 2006 08:26

07 November 2005, 11:26	#2
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	I used to had a mtec030/28, a p5 1260 and now, a dce bppc... I have an Escom 1d4 mobo, but never had any issues with timing... even now with a zorroII busboard+grex all is well... I think there is something else wrong, perhaps the psu is not enough?

07 November 2005, 12:58	#4
keropi . Join Date: Oct 2004 Location: Ioannina/Greece Posts: 5,040	Omega Project's Sound Enhancer : where di u grab that from???

07 November 2005, 13:09	#5
BarrySWE Zone Friend Join Date: Sep 2005 Location: Sweden Age: 46 Posts: 404	http://gurumeditation.se/ I got the last one ;-)

07 November 2005, 20:34	#6
ant512 Registered User Join Date: Dec 2002 Location: California Posts: 964	You won't experience the bus timing fault with an 030 accelerator.

08 November 2005, 01:47	#7
Unknown_K Registered User Join Date: May 2002 Location: Ohio/USA Age: 55 Posts: 1,380	My 030/50 runds fine on the 1d4 revision board. I do have problems with the SCSI addon for that board (works once out of a dozen boots with no scsi devices attached), and think it might be do to board revision. Too lazy so far to do the board upgrade (and worry about screwing it up, 1200's are not cheap to find in the US).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)