![]() |
![]() |
#81 |
Registered User
Join Date: Nov 2014
Location: Italy
Posts: 2,342
|
|
![]() |
![]() |
#82 |
Registered User
Join Date: Sep 2016
Location: italy
Posts: 1,480
|
I had to complete the windows 10 update in all its parts after the new computer arrived.
what is the latest beta available for voodoo? (beta12 2020 12.17) thanks |
![]() |
![]() |
#83 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
One more update before official beta:
Framebuffer access is now fully indirect, including byteswapping, fixes wrong colors in RGB modes and possibly allows 3D to work. (Note: I ignore any 3D problem unless same config is confirmed working on real hardware!). This probably reduces speed but compatibility comes first. Direct access for compatible modes can be added later. |
![]() |
![]() |
#84 |
Registered User
Join Date: Sep 2016
Location: italy
Posts: 1,480
|
Thanks I will do other tests on the 68k side
I just wanted to add: I tried 4.1FE on the fly it works again and all resolutions are now supported 16-24-32bit with the right colors. The Odyssey browser also works well with the right colors many applications are supported such as mplayer (also works with opengl I don't know if this is important) the colors are right but this is the 2D part but to be a prebeta now it is very fast. Maybe it's not specific to 4.1FE but it works fine I have to try a clean install with warp3d out of curiosity Thanks. |
![]() |
![]() |
#85 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Reupload. It wasn't fully indirect, now pcem access functions are properly called and texture writes etc should also work.
EDIT: Voodoo 3 has JIT filtering/blending which is not yet enabled and won't be until someone proves hw accelerated 3d works ![]() Last edited by Toni Wilen; 19 December 2020 at 18:47. |
![]() |
![]() |
#86 |
Registered User
Join Date: Aug 2016
Location: Earth
Posts: 884
|
Oh, okay, I'll redownload. Ahhh! That fixed some 2D screen problems I noticed from the "bad" upload. Now to test a bit more.
Last edited by AC/DC HACKER!; 19 December 2020 at 18:46. |
![]() |
![]() |
#87 |
Registered User
Join Date: Aug 2016
Location: Earth
Posts: 884
|
Hardware isn't yet functional here. I've tried Payback 68K.. The prefs will allow enabling Hardware but a requester won't show to pick a screen. 2D (software) screens look decent, with a couple "hesitations"..I'll record a log soon.
|
![]() |
![]() |
#88 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Not being able to select screenmode rarely depends on hardware. You really sure everything required is installed?
|
![]() |
![]() |
#89 |
Registered User
Join Date: Aug 2016
Location: Earth
Posts: 884
|
I've looked a SnoopDOS...and it LOOKS good...but I'm checking into it. That's my wonderment also. I'm new to Mediator and Vooodoo, so I'm checking for what I missed.
|
![]() |
![]() |
#90 |
Longplayer
|
Warp3D not quite their yet. Sticking with Warptest, the programe runs but shows no texture. But its a start! just like when CVision3D support was starting out.
|
![]() |
![]() |
#91 |
Registered User
Join Date: Aug 2016
Location: Earth
Posts: 884
|
I didn't notice that Mediator has an update to Warp3D. Screen modes are selectable, but..I get a grey screen for Payback 68K/PPC hardware. I get correct screens for 2D, both Payback versions. Wipeout, won't display in Window on Workbench, doesn't matter what screen.. 3D not supported. Expected that, from 16-Bit and 32-Bit. However, picking a Screen mode, that shows...2 splash images show, but the "game" or interactive screens are black.
Progress! Whoohoo! |
![]() |
![]() |
#92 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Code:
Hardware driver available Available drivers: S3 ViRGE Supports format 0x1B Hardware Driver Primitives supported: [POINT] [LINE] [TRIANGLE] Filtering: [BI-FILTER] [MM-FILTER] Permedia2 Supports format 0x79FF Hardware Driver Primitives supported: [POINT] [LINE] [TRIANGLE] Filtering: [BI-FILTER] Voodoo 3 Avenger Supports format 0x80 Hardware Driver Primitives supported: Filtering: Voodoo 3 Avenger Supports format 0x20 Hardware Driver Primitives supported: Filtering: Error: No ModeID found Closing down... |
![]() |
![]() |
#93 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
There is something strange going on with Mediator 1200.
Driver properly sets window address pointing to start of BIOS ROM when it reads it but when it tries to write in VRAM bank window gets set to beginning of PCI space (first PCI BAR which contains IO stuff) when it should be set to second PCI BAR which points to VRAM. Anyone have Mediator 1200 + Voodoo 3 + latest driver (MM_CD_UP2.6.lha) and Voodoo working correctly? |
![]() |
![]() |
#94 |
Registered User
Join Date: Sep 2016
Location: italy
Posts: 1,480
|
to install warp3D with 4.1FE in this step what should I select?
CyberGraphX V3 / V4 or both thanks Last edited by White; 20 December 2020 at 10:39. |
![]() |
![]() |
#95 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
|
![]() |
![]() |
#96 |
Longplayer
|
I can pull my Amiga 1200 to bits and setup a med+voodoo3 if it can help development (I have the original 4 slot version with updated mach chips for mmcd). I never really liked it as its a slower setup than the BVision and it was a pain to setup. You don't realize how useful the built in aga mode promotion is until its gone
![]() or maybe best to see if someone shows up with a working setup already. @white Also you dont need to install warp3d in os4 as its build in! |
![]() |
![]() |
#97 | ||
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Quote:
Quote:
|
||
![]() |
![]() |
#98 |
Registered User
Join Date: Sep 2016
Location: italy
Posts: 1,480
|
@Toni
I apologize for the request the system is configured for voodoo3 warp3D 4.2a was downloaded from the hyperion site i have never used warp3D with 4.1FE i don't want to get wrong version to install which version of warp3D should be installed in 4.1FE thanks |
![]() |
![]() |
#99 |
Registered User
Join Date: Sep 2016
Location: italy
Posts: 1,480
|
@ Mad-Matt
thanks I have only read now |
![]() |
![]() |
#100 | |
Registered User
Join Date: Oct 2020
Location: Bicester
Posts: 1,941
|
Quote:
I get that error when i use the standard warp3d version but it works when using the elbox version. they are both v4.2 so the only way to check is the size standard warp3d v4.2 = 38664 bytes elbox mediator v4.2 = 39216 bytes the first 2 pics are with the elbox version and the last is with the standard version br Last edited by abu_the_monkey; 30 November 2022 at 20:30. |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
MAME now fully open source - time for Voodoo 3 emulation in WinUAE? | jbenam | support.WinUAE | 32 | 12 December 2020 09:43 |
Crash of WinUAE v2.8.1.0 when testing NetSurf | tygre | support.WinUAE | 4 | 28 August 2016 01:34 |
Voodoo GFX Emulation | FOL | request.UAE Wishlist | 6 | 20 February 2015 22:55 |
Experimental/testing builds of WinUAE 2.7.0 with VS 2013 | mark_k | support.WinUAE | 18 | 09 September 2014 22:26 |
Need help with CD32 emulation on Winuae | trydowave | support.WinUAE | 9 | 31 August 2012 10:07 |
|
|