English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 15 September 2018, 18:30   #1
Clad
Registered User

 
Join Date: Sep 2018
Location: Toulon, France
Posts: 10
Amiga 2000 rev 6.2 - 2 colour bits missing

Hello,


The colours of my 2000 are off. Stock 2000, rev 6.2


I wrote a testscreen program to see the issue better.


Normal brightness:


https://drive.google.com/file/d/1bAk...ew?usp=sharing


You can notice the last 3 colours are a bit too red



Same output, Low brightness:


https://drive.google.com/file/d/1UP-...igVd4Oxj6/view

The red is actually fine

https://drive.google.com/file/d/139H...ew?usp=sharing

But there is an issue with the 2nd bit of the green (so XX0X and XX1X are always exactly the same colour, like $010 and $030 for instance)

https://drive.google.com/file/d/1gsC...ew?usp=sharing

Same issue with the 3rd bit of the blue (not exactly obvious on the picture, but when paiting the screen with like $8 and $C confirm it's exactly the same shade)

https://drive.google.com/file/d/11dC...ew?usp=sharing




I took the motherboard appart, I can't seem to see any fault (well, 3 fuses around the video output are gone & shorted, but the RGB signal fuses are still there)


The line drivers and the vidiot:


https://drive.google.com/file/d/1tNE...pL7vEwzN8/view


Denise herself:


https://drive.google.com/file/d/14-D...s7IEWnUgz/view


Any idea what could be wrong ? Ever happened to anyone ?


Thanks

Last edited by Clad; 17 September 2018 at 05:56.
Clad is offline  
Old 11 October 2018, 23:31   #2
Clad
Registered User

 
Join Date: Sep 2018
Location: Toulon, France
Posts: 10
After messing a bit with the Amiga (opened/closed it a few time, trying an accelerator board, then putting it back exactly the way it was) one, I got the 3rd bit of blue back for some reason. Does that help a diagnostic ?

Also, I changed Denise, no difference. (it's not what got the blue back)
Clad is offline  
Old 11 October 2018, 23:45   #3
Franchute13
Registered User
Franchute13's Avatar
 
Join Date: Feb 2013
Location: Argentina
Posts: 244
Hi.
Are you sure that the video cable and monitor work properly?
Franchute13 is offline  
Old 12 October 2018, 10:11   #4
Clad
Registered User

 
Join Date: Sep 2018
Location: Toulon, France
Posts: 10
Yeah, I have plenty so it was one of my first try. Beside, a fault in the cable would not give a display like this one: https://drive.google.com/file/d/11dC...XWdFbMd5t/view

It's clearly an issue with one of the colour bit, but it's not denise.
Clad is offline  
Old 12 October 2018, 13:31   #5
Daedalus
Registered User

Daedalus's Avatar
 
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 3,286
Hmmm, there are a few things that deal with the colour in a bitwise fashion: there are logic buffer chips, pull-up resistors, and the video hybrid itself that could all be at fault. Also, check for debris or corrosion around the video slot - shorts here will cause bits to go missing on the analogue output. Given the temperamental nature of the fault, I would expect it's some cracked joints somewhere along the way, and the bending of the board from the troubleshooting has moved something enough to give good contact again.
Daedalus is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Amiga 2000 Rev. 4 motherboard uses? snowfire support.Hardware 20 15 September 2017 06:41
Amiga 2000 rev. 4.4 motherboard yellow screen amiga2000 support.Hardware 11 27 January 2016 21:49
Amiga 2000 Rev 6 to Rev 6.2 (or 6.3) hardware changes amigasith support.Hardware 13 05 September 2015 18:23
Amiga 2000 rev 6.3 with a2620 cyberfox_it support.Hardware 2 03 January 2014 17:49
Wanted: rev 6.x Amiga 2000 motherboard 8bitbubsy MarketPlace 2 02 September 2011 08:28

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 07:05.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Page generated in 0.08123 seconds with 13 queries